Used continuous in Utrecht, Netherlands

1996 Arthrex Continuous Wave II AR-6450 roller pump (arthroscopy)

• Manufacturer: Arthrex
• Model: CONTINUOUS WAVE II AR-6450

Roller pump for arthroscopy, good used condition Type of device: Roller pump (arthroscopy) | Available: 1 piece from stock

1998 Monti Antonio - belt press for pre-stretching of continuously knitted pieces

• Manufacturer: Monti

Location: Warehouse TTM Holland Monti Antonio belt press for pre-stretching of continuously knitted pieces Ww 1300 mm (51 inches), with automatic stacker. The machine has no integrated boiler. • Introduction with...

Colombo

• Manufacturer: Colombo

Veneer press continuous press glue press plate press Colombo Oil heated. input/output included 8 cylinders Complete with glue roller etc.

Bürkle HSO 240/D

• Manufacturer: Bürkle

Bürkle HSO 240/D 340/140 continuous-flow veneer press/gluer press Maximum pressure 240T Maximum pressure 6 kg/cm² 8 cylinders with a diameter of 110mm Stroke 150mm Solid plates 40mm Water heated to 60°C with a bo...

Colombo PCA S

• Manufacturer: Colombo

Veneer press continuous press glue press plate press Colombo Oil heated to max 140 degrees input/output 6 cylinders Solid plates 40mm Glue roller: Osama S4R/P-1400 Year of construction 2000 Working width max. 140...

2005 Slow-moving LZT-OK 70 ES SO

Continuous press Langzauner LZT-OK 70 E SO Year of construction 2005 Serial number 401-05-X077 Maximum press dimensions 3000x1500mm Maximum stroke 400mm Press pressure 70T 20kW, 31Amp, 380V 6 cylinders Top plate ...

Wemhöner VOF 2 400-2

• Manufacturer: Wemhöner

Continuous press Wemhöner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and...

2018 Orma HL/A Digit 25/13

• Manufacturer: Orma

Output table with mechanized rollers length 2400 x height 1034 mm, input table

1990 OCMAC EL TA

Corpuspers OCMAC - KGC EL TA Max. locking dimensions 2450x1450x900mm Fully equipped with renewed control and cabling!

Capelleveen furnace unloader

• Manufacturer: Capelleveen

Furnace unloader for continuous furnace, make Capelleveen Working width 2800 mm Transport via 3 chains, usable width 880 mm Dimensions: width 4050 mm, length/depth 1220 mm Height 1450mm Condition as is - see phot...

BAUTZ AC servo amplifier DSK 12 Servo controller DSK12

• Manufacturer: BAUTZ

The DSK compact unit is used for speed and torque control of sinusoidally commutated AC servomotors. A resolver mounted on the motor is required for commutation. The unit is powered by a 230 V AC mains supply o...

1997 Elumatec MGS 72/30 Mitre Saw

• Manufacturer: Elumatec
• Model: MGS

M. no.: 37542 | Pivoting range from: 0° - 45°, continuously adjustable to the left and to the right | Positive location points at: 15° - 30° - 45° | Saw diameter: ø380mm | Engine: 3 kW | Speed: 2800 rpm | Weight...

Unelec AT400 LB71 800 kVA

• Manufacturer: Unelec
• Hours: 3,362 hour
• Power: 640 kilowatt

For sale Unelec 800 kVA generator part / Alternator Generator part is in very good condition ! Coming from Cummins KTA 50 emergency power machine (see picture) Generatorpart is in double bearings ! Generator Also...

2013 Mecc Alte Spa ECI 32-3L/4 78 kVA

• Manufacturer: Mecc Alte
• Hours: 740 hour
• Power: 62.4 kilowatt

For sale Mecc Alte Spa ECO 32-3L/4 Generator Part 78 kVA Alternator Generator part in neat and well-functioning condition! Has been meggered! Generator Our specialists are also fully qualified for maintenance/rep...