Used comall

Machinery

Description Mode No. 16 sections 445 x 222 mm No. 10 of which with varying width No. 6 of which with fixed width and easy supply through door Lifting device FOR MORE FEATURES SEE CATEGORY “PRODUCT CHARACTERISTICS”

Machinery

Description Specifications No. 42 boxes 150 x 90 mm, 18 of which H = 900 mm Handle 4 wheels with a diameter of 125 mm, 2 of which with a locking device Support: 450 Kg Carton FOR MORE FEATURES SEE CATEGORY “PRODU...

Machinery

Description Technical characteristics CARR FE Support: 775 Kg 8 sections (80 mm wide) Arms adjustable in 5 different positions 4 wheels with a diameter of 200 mm, of which 2 with a locking device Maximum length o...

Machinery

Description Technical characteristics TILTING DEVICE Work table height: 900 mm (adjustable) Pneumatic reversal 0/85 The Contact surfaces coated with scratch-resistant material Management in absolute safety throug...

Machinery

Description Basic components Position stop driven by encoder with C.C motor Position lock cylinder Position accuracy ± 0.5 mm Loading capacity per linear meter: 6 Kg Plastic cylinders Carton FOR MORE FEATURES SEE...

Machinery

Description Specifications Rolling work table Length stop controlled by motor without brushes Gear transmission system Fixed stop Horizontal roller height above the ground: from 850 to 1010 mm Rod support width: ...

Machinery

Description Specifications Work table made of satin stainless steel finish Length stop controlled by motor without brushes Gear transmission system Fixed stop Horizontal roller height from the ground: from 850 to...

Machinery

Description Specifications Minimum cut: 0 mm Manual stop length Loading capacity per linear meter: 3 Kg Width of the support surface of the bars: 200 mm Patented length stop with sliding surface under the work ta...

Machinery

Description Basic PORTER equipment Loading capacity per linear meter: 3 Kg Plastic cylinders Carton FOR MORE FEATURES SEE CATEGORY “PRODUCT CHARACTERISTICS”

Machinery

Description Technical characteristics SEALANT CE Commercial glue in cylindrical cartridges (min. Ø35 max. 49mm – Min. length 215 max. 235mm.) Supply of glue at the end of the profile in a single pass Automatic fe...

Lines

Description The proposed solution is particularly suitable for small-medium productions. Using a single toothing tool allows the production of the profile in 2 stages: in the first stage is the toothing of the pr...

Lines

Description The proposed solution is particularly suitable for small-medium productions. Using a single denting tool, the profile is made in two successive stages of dentition and bar insertion and then assembled...

Lines

Description The TTK 1000 system is suitable for medium-high production. The presence of machine translation between the 2 toothed tools and the unloading file downstream of the assembly allows the manual movement...

Teething machines

Description Technical characteristics TAB 101 No.2 gear motors Bar feed rate: 56 m / min can be increased with a special kit Front and rear bar control Complete protection around the cutting area Shaft path in st...

Teething machines

• Manufacturer: TSIMERIKAS ASTERIOS

Description Technical characteristics TAB 100 M 2 variable speed motorized deburring units Independent axle position X and Y axis adjustment via 4 gear motors and ground recirculation ball screws Movable folding ...