Building Filters

22

Used cnc router in Chuo City, Tokyo, Japan

  • Kanefusa Ace V-groove bit 60°type

    Kanefusa Ace V-groove bit 60°type

    • Manufacturer: Kanefusa

    General materials Ideal for decorative engraving on particleboard and other materials and for engraving letters on plastic boards. Processing angles are 60°V type and 90°V type are available. Shaft diameter: φ12 ...

    Kumagaya, Japan
  • Kanefusa Ace V-groove bit 90°type

    Kanefusa Ace V-groove bit 90°type

    • Manufacturer: holding both roles (e.g. Prime Minister and Minister of Foreign Affairs)

    General materials Ideal for decorative engraving on particleboard and other materials and for engraving letters on plastic boards. Processing angles are 60°V type and 90°V type are available. Shaft diameter: φ12 ...

    Kumagaya, Japan
  • Kanefusa Straight Bit Heavy Cutting

    Kanefusa Straight Bit Heavy Cutting Type

    • Manufacturer: Kanefusa

    Because it is a replaceable blade type The cutting edge diameter is always constant The finished precision is uniform. Chamfering, perimeter cutting, hollowing, boring, drilling, etc. can be performed. Select the...

    Kumagaya, Japan
  • Kanefusa Finishing bits, double-pressed type

    Kanefusa Finishing bits, double-pressed type

    • Manufacturer: Kanefusa

    Bits for finishing in light cutting. The double-pressed type is effective in suppressing burrs on the top and bottom surfaces. Shaft diameter: φ12/φ16 Blade diameter: φ12/φ16 Overall length: 105/110mm Blade lengt...

    Kumagaya, Japan
  • Kanefusa Dia Cosmobit Eco.

    Kanefusa Dia Cosmobit Eco.

    • Manufacturer: Kanefusa

    Both forward and reverse leaded cutting edges prevent burrs and chips on both surfaces of the work material. In addition The use of high quality diamond tips The diamond inserts are of high quality and provide ou...

    Kumagaya, Japan
  • no-image_en.png

    Kanefusa Luffing bit S-type straight

    • Manufacturer: Kanefusa

    High speed feed Low-noise heavy-duty roughing bit. Our original E type blade type is When the axial flare is small Almost smooth finished surface can be obtained. Shaft diameter: φ12, φ16, φ20 Blade diameter: φ12...

    Kumagaya, Japan
  • Thinks ZXH-1631

    Thinks ZXH-1631

    • Manufacturer: Thinks

    Features Vertical, horizontal, and inclined machining is possible at will. Easy creation of machining data with dedicated automatic program creation software. ■A wide variety of shapes and sizes can be handled. T...

    Kumagaya, Japan
12