Used cnc rotary table in Czech Republic

Machine center Deckel Maho DMU 65 monoBlock

• Manufacturer: DMG Mori
• Model: DMU 65 MONOBLOCK

5-axis machining center X=750, Y=650, Z=550, rotary table r=650 Rpm 20k Year 2016 iTNC 640 system, only 26,500 spindle hours, 60 slots

2007 WI 130 CNC

The WI 130 CNC horizontal boring machine is in good technical condition. Heidenhain iTNC 530 control system. Can be seen by appointment. The support of the drill rod-auxiliary column no longer exists, without ang...

1985 TOS WH 10 NC

• Manufacturer: TOS
• Model: WH 10
• Spindle bore: 100 millimeter

Length of the working table: 1120 mm | Width of the working table: 1000 mm | Maximum table load (evenly distributed): 3000 kg | Minimum rotary speed of the spindle: 8 1/min | Maximum rotary speed of the spindle:...

1984 TOS WH 10 NC

• Manufacturer: TOS
• Model: WH 10

Length of the working table: 1120 mm | Width of the working table: 1000 mm | Maximum table load (evenly distributed): 3000 kg | Minimum rotary speed of the spindle: 16 1/min | Maximum rotary speed of the spindle...

1986 TOS WH 10 NC

• Manufacturer: TOS
• Model: WH 10
• Spindle bore: 100 millimeter

Length of the working table: 1120 mm | Width of the working table: 1000 mm | Maximum rotary speed of the spindle: 1250 1/min | X-axis travels: 1000 mm | Y-axis travels: 900 mm | Z-axis travels: 630 mm | Spindle ...

1987 TOS Varnsdorf WH 10 NC

• Manufacturer: TOS Varnsdorf
• Model: WH 10
• Spindle bore: 100 millimeter

Machine in good condition, equipped with new NC Genius v1.5 - Italy 2006, under power, can be inspected any time.

2008 HAAS VF 9B/40HE

• Manufacturer: Haas
• Model: VF-9/40
• Spindle taper: SK 40

HAAS VF 6B/40HE vertical machining center is in good technical condition. HAAS CNC control system (FANUC compatible) Cooling device with pump including 300 l tank. chip conveyor + equipment

2008 Hurco VMX 42 SR

• Manufacturer: Hurco
• Model: VMX42SR

Equipment: B axis Tool holders Control system: Winmax | Total hours: 11.000 h | Hours on: 3.000 h | Length of the working table: 1270 mm | Width of the working table: 610 mm | Number of axes: 5 pcs | Maximum tabl...

1975 TOS Varnsdorf WFQ 80 CNC

• Manufacturer: TOS Varnsdorf
• Model: WFQ 80
• Spindle bore: 128.57 millimeter

The machine is in good technical condition, can be tested. Controlled FIBRO rotary table D=800 mm, load capacity 500 kg. Fixed table load capacity 5000 kg.

2015 TOS Varnsdorf WHQ 105 CNC

• Manufacturer: TOS Varnsdorf
• Model: WHQ 105 CNC
• Spindle bore: 105 millimeter

·Splash guard around the rotary table ·Chip conveyor ·Oil cooling unit (chiller) ·Renishaw RMP60 measuring probe Upgrades in 2024 and 2025: ·Replacement of ball screws for X and Z axes by manufacturer KSK Kurim C...

1986 TOS Varnsdorf WH 10 CNC

• Manufacturer: TOS Varnsdorf
• Model: WH 10
• Spindle bore: 100 millimeter

The machine is in good technical condition, it can be tested under power. The control system is a Heidenhain iTNC 410. The accuracy of the machine corresponds to its age.

2022 TOS Varnsdorf WHQ 15 CNC

• Manufacturer: TOS Varnsdorf
• Spindle bore: 150 millimeter

Heidenhain linear scale, Fanuc 31i system Control system fanuc: Fanuc 31i | Diameter of working spindle: 150 mm | Travel x-axis: 5000 mm | Travel y-axis: 2500 mm | Spindle speed: 10 - 3000 /min. | Cooling through...

2000 TOS Varnsdorf WH 10 CNC

• Manufacturer: TOS Varnsdorf
• Model: WH 10
• Spindle bore: 100 millimeter

The machine is in good technical condition, under power, after agreement is possible to test it.

2001 TOS Varnsdorf WHQ 105 CNC

• Manufacturer: TOS Varnsdorf
• Model: WHQ 105 CNC
• Spindle bore: 105 millimeter

Control system heidenhain: TNC 430 | Diameter of working spindle: 105 mm | Travel x-axis: 1800 mm | Travel y-axis: 1250 mm | Spindle speed: 0 - 2800 /min. | Cooling through spindle: NO | Spindle travel - w axis:...

TOS Hulín SKJ 8 NC

• Manufacturer: Toshulin
• Model: SKJ 8 NC

The machine is in a good technical condition. Under power. It can be tested.