Used cnc lathe machines in Netherlands

NN (D940)

• Manufacturer: NN

Hydraulic counter center Max. turning diameter: 1.100 mm ø | Machine afmetingen (l×b×h): 800 x 500 x 700 mm

Leopoldo Pontiggia - SFE / CC 950 1R

• Manufacturer: Pontiggia Leopoldo

Dbc turning length: 2500 mm | Swing over bed ø: 1900 mm | Swing over cross slide ø: 1520 mm | Spindle bore: 102 mm | Spindle power: 45 kW | Tailstock spindle ø: 130 Ø | Stroke pinole: 300 mm | Spindle tap...

ZERBST - DP1 S3 x 3700

4 chuck 1600 mm Heidenhain digital read out Steady rest 710 mm Powered tailstock Threath cutting Triple guide ways cast irion bed design For turbine rotors, electrical motor anchors , reactor vessels, cylinders, ...

DMG MORI - CTX delta 4000 TC

• Manufacturer: DMG Mori

Combine turning with 5-axis milling and simultaneous milling with five axes in one working space Mill-Turn machine achieves complex geometries in one cycle as a combination machine Apllivcation examples: CrankSha...

SCHIESS FRORIEP - DV DF DZ DKE

• Manufacturer: Schiess Froriep

set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump 125 mm

HAPREMEC - VCE 140

Max. turning ø: 1400 mm | Table ø: 1200 mm | Control: CNC Altstohm Cyber 3000 | Length: 2700 mm | Width: 2400 mm | Height: 3950 mm | Weight: 0 kg

FAT - TUR 63 MN

• Manufacturer: TuR

3 chuck SMW NGH 315-102 4 chuck 400 mm Steady rest Sandvik COROMANT Tool system quick change CE Marked with double door

Leopoldo Pontiggia - SFE 700

• Manufacturer: Pontiggia Leopoldo
• Model: SFE-700

3 chuck 1200 mm Heidenhain Digital read out syhstem X / Z Axis Feeds in 2 directions Multi fix Tool systems with inserts

SCHIESS FRORIEP - DV DF DZ DKE

• Manufacturer: Schiess Froriep

set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump length ways 125 mm Hole to hole jump in width 250 mm

MAZAK - INTEGREX 200-4 ST

• Manufacturer: Mazak
• Model: INTEGREX 200 IV ST

Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 24...

WFL Austria - M 100 / 5000

MillTurn M100: Complete & Complex machining Turning & Milling Equipped: ATC 108 double chain for milling tool holders ATC 10 positions boring bar holders up to 1000 mm SCHUNK 3 chuck THW 630 - 160R SMW Steady res...

MAZAK - INTEGERX 35 Y

• Manufacturer: Mazak

Hydraulic chuck 300 mm Tool setter tool eye Chip conveyor Tailstock B Axis Stroke 90 Gr B Axis Milling tool Sk-40 B Axis Turning tool KM-63

MAZAK - INTEGREX 400 II-S

• Manufacturer: Mazak
• Model: INTEGREX 400

Max. turning ø: 760 mm | X-axis: 630 mm | Y-axis: 230 mm | Z-axis: 1585 mm | B axis: 225 ° | Spindle bore: 80 mm | Speedrange: 6000 Rpm | B-axis speedranges: 12000 Rpm | B-axis power: 19 kW | Length: 70...

DEMOOR - 825-S360

• Manufacturer: Demoor

Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Conical turning carriage Multi fix tool system