Used cnc lathe in saxe

2015 HAAS ST-30 CNC Lathe with Programmable Tailstock / Automatic Tool PreSetter Only 1,855 Hours

• Manufacturer: Haas
• Model: ST-30

Excellent Condition Low Hours 3400-RPM Gear Drive 2-Speed Spindle 10" 3-Jaw Hydraulic Chuck A2-6 spindle nose 31.75" Swing 3.0" Bar Capacity 26" Distance Between Centers 21" Turning Diameter 12-Station Bol...

Wickman 2 1/4" 6-Spindle Lathe

• Manufacturer: Wickman

6 spindle 2 ¼” Wickman. Pickoff and 2 recess tool attachments. Manual bar loader. Lots of gears etc.

MATTISON 55C 30" MANUAL LATHE

• Manufacturer: Mattison

MATTISON 55C, 30" MANUAL LATHE S/N:9736, (220/60/3 electrics), S-4920 Standard Specifications: - 30" turning capacity manual fed lathe - 7-1/2 HP spindle drive motor, (2,700 RPM spindle) - Double-end work-pi...

MATTISON 55C, 30" MANUAL LATHE

• Manufacturer: Mattison

MATTISON 55C, 30" MANUAL LATHE S/N:N/A, (575/60/3 electrics), S-4344 Standard specifications: - 30" turning capacity manual fed lathe - 10 HP spindle drive motor, (2,700 RPM spindle) - Double-end work-piece ...

PM-1440E-LB 14"x40" Precision Lathe

• Manufacturer: Precision Matthews
• Model: PM-1440E-LB
• Spindle bore: 50.8 millimeter

2" Spindle Bore, allows larger work through the headstock DRO, BXA Quick Change Tool Post, Foot Brake, and much more included standard! Cast Iron base for extra rigidity 220V Single Phase Power, no phase converte...

PM-1440-2V 14"x40" Precision Lathe

• Manufacturer: Precision Matthews
• Model: PM-1440-2V
• Spindle bore: 50.8 millimeter

2" Spindle Bore, allows larger work through the headstock Variable Speed - Change speeds while running to dial in for the best surface finish DRO, Quick Change Tool Post, Foot Brake, and much more included standa...

Okuma OSP-U100L Operator Control Panel Keypad Monitor LU-25 CNC Lathe

• Manufacturer: Okuma
• Model: OSP-U100L

In Good Used Condition. Removed From an Okuma LU-25 Lathe. With aftermarket monitor PLVW92U. 10.4" Flat screen. Will need some assembly. If this item ships as Flat Rate Freight please see details in Shipping tab

SMB ST-50 CNC LATHE CAPACITY 17"

• Manufacturer: SMB TECHNICS
• Spindle bore: 65 millimeter

SMB ST-250 CNC LATHE CAPACITY 17" SMB has produced a new lathe which completely satisfies the demands in the field of mass production machining. We have also made the body smaller to save space which help to incr...

Jet 16" X 59" Lathe - Gh-1460zx

• Manufacturer: JET
• Model: GH-1460ZX

Compound Rest, Tail Stock, Newall Dro, 10" 3 Jaw Chuck, 3" Bore

MATTISON 55C 30" MANUAL LATHE

• Manufacturer: Mattison

MATTISON 55C, 30" MANUAL LATHE S/N:10819, (220/60/3 electrics), S-4919 Standard Specifications: - 30" turning capacity manual fed lathe - 10 HP spindle drive motor, (2,700 RPM spindle) - Double-end work-piec...

2025 WILLIS Model 1550 Colchester-type lathe, Swing 15", Center distance 50"

• Manufacturer: Willis
• Model: 1550

2025 WILLIS Model 1550 Colchester-type lathe, Swing 15", Center distance 50" The Willis Machinery 1550 engine lathe features a swing over bed of 15 1/4 inches, a swing in gap of 24 inches, and a distance between ...

Johnford SL 500A 2S+C+Y CNC Lathe

• Manufacturer: Johnford
• Model: SL500A

Johnford SL 500A 2S+C+Y CNC Lathe Swing over Bed: 580mm, Swing over Cross Slide: 370mm, Chuck Size: 12", Spindle Nose: A2-11, Spindle Bore: 115mm, Sub Spindle, 12-Station Live Tooling "C" Axis Spindle BMT-65, Y-...

PM-1440GT-VS 14"x40" Ultra Precision Lathe

• Manufacturer: Precision Matthews
• Model: PM-1440GT
• Spindle bore: 50.8 millimeter

NEW! Variable Spindle Speeds, driven by a Hitachi VFD Adjust spindle speed on the fly, which allows for the best possible surface finishes. (Low 36-140RPM, Med 126-510RPM, High 500-2000RPM) Machine can run on Sin...

TRAK TRL 1845RX Lathe w/RLX CNC

• Manufacturer: TRAK
• Model: TRL 1845RX
• Spindle bore: 85.09 millimeter

Equipped with: Advanced features with Verify Buck chuck 8” D1-6 Work lamp TRAKing software Converter DXF

Fryer Easy Turn ET-14 CNC Lathe

Imperial Metric Fryer Easy Turn ET-14 CNC Lathe Swing over bed: 14" | Distance between centers: 40" | Swing over cross slide: 7" | Cross slide travel: 7.5" | Spindle thru-hole: 1.562" | Spindle speeds: 150 - 3500...