Used classifying

Stainless Steel 304 Hosokawa Mikropul ACM 60-IS PSR-11 Air Classifier mill - IPP# 235955

• Manufacturer: Hosokawa

Milling package Mikro ACM 60-IS PSR-11 milling machines. Rated for 1500 kg./Hr., rated for 11 bar at 70 degrees C. with a 36 pin disk and a 24 blade classifier. Classifier is rated max. 3100 rpm

Stainless Steel 304 Hosokawa Mikropul ACM 60-IS PSR-11 Air Classifier mill - IPP# 235954

• Manufacturer: Hosokawa

Milling package including Mikro ACM 60-IS PSR-11 milling machines Rated for 1500 kg./Hr., rated for 11 bar at 70 degrees C., with a 36 pin disk and a 24 blade classifier. Classifier is rated max. 3100 rpm. speed ...

Eagle Iron Works Classifying Tanks

• Manufacturer: Eagle

Designed to remove large volumes of excess water from feed material, Eagle Water Scalping-Classifying Tanks are typically used in applications such as dredging and pumping, as well as with high silt materials. Th...

Air Knife With Classifier

Used Air Knife includes Used Classifier Screener Motor HP 3, Voltage 480, Air Style is Blower In-Feed Height 53" Knife Width 7" Overall Dimensions 33" L x 30" W x 61" H Screen Dimensions 21"L x 12.5" W In-Feed He...

Sturtevant SD-80 Air Classifier

• Manufacturer: Sturtevant

Drive: Varispeed to adjust Particle Control Miscellaneous

Air Knife With Classifier Screener

Used Air Knife includes Used Classifier Screener Air knife specs: S/N 1285, Motor HP 2, Voltage 480, Air Style is Blower, In-Feed Height is 54", Knife Width 7", Overall Dimensions 35"L x 24.5"W x 63"H | Classifie...

72" Midwestern Midwestern Gyra-Vib Classifier

• Manufacturer: Midwestern Industries

72" Midwestern Midwestern Gyra-Vib Classifier 2 Decks 2.5 HP AC Motor 230/460 7.6 Amps At 230 3.8 Amps At 480 Model MR60C60-72-RAS S/N 1016-5051

Retsch Mechanical Air Separator, Model PT38, C/S

• Manufacturer: Retsch

Retsch Mechanical Air Separator, Model PT38, C/S Used Retsch mechanical air separator, model PT38, carbon steel construction, .18 kw, 480 volt motor, serial# 673186.

2011 GENERAL KINEMATICS DS-C 72X31.5 DESTONER/AIR CLASSIFIER [MG-010003]

• Manufacturer: General Kinematics

GENERAL KINEMATICS - DS-C 72X31.5, ...Air Classifier/Destoner - Used Specifics: -- New in 2011. -- Less than (900) Hours. -- Dual Knife. Applications: -- C & D Materials. -- RDF fuel. -- Glass. -- Commingled mate...

Air Knife With Classifier

"Used 7""Air Knife, 3 Hp Motor, (230/460) Start Stop Button 54"" High Comes With 11"" x 32"" Classifier, 7/16"" Hole Single Deck .5Kw 47"" High"

12' Long x 20" Wide Witte Fluid Bed Dryer/Classifier

• Manufacturer: Witte

Used Witte 12' Long X 20" W Stainless Steel Classifier With Fluid Bed Drying Section Includes Gas-Fired Heater

30" Midwestern Industries Classifier, Model F3-30, 2 Sepration

• Manufacturer: Midwestern Industries

Used 30" Midwestern Industries Classifier, Model F3-30, 2 Separation 1/2 HP Motor, 230/460 Voltage, 2.6/1.3 Amps Includes Extra Screen

46" Diameter Southwestern Engineering Classifier, Model D-87802C/C

• Manufacturer: Southwestern Industries

Used Southwestern Engineering Classifier Model D-87802C/C 1 HP, 440V, 3 PH 46" Diameter with Mesh Screen 37" In-Feed Height 18" Discharge Height 1 Deck and 2 Separations