Used chisel in Poland

Ploughing and ploughing unit - APHW

Ploughing and plowing unit APHW is designed for tillage and soil improvement ? all types of soils. The main task of the aggregate is to perform plowing of fields after harvesting of crops at a depth of up to 15 c...

Ploughing and ploughing unit - AP RS

• Working width: 2.4 meter

Ploughing and plowing unit AP RS is designed for tillage and soil improvement of all soil types. The main task of the aggregate is to perform post-harvest plowing of fields up to 15 with side plowshares and deep ...

2013 Väderstad Cultus CS500

• Manufacturer: Väderstad
• Model: CULTUS CS500

Vaderstad Cultus CS 500 The machine is ready for work and without additional financial support!! 2011 Transport width - 3 m Basic weight - 6600 Number of tines - 25 The Cultus was designed to meet farmers' expec...

2012 Väderstad Carrier 1225

• Manufacturer: Väderstad
• Model: Carrier
• Implement weight: 1,800 kilogram

VADERSTAD CARRIER 1225 Working width - 12.15 m Roller width - 12.15 m Transport width - 3 m Transport height - 4 m Number of discs - 100+1 Disc spacing - 25 cm Brakes - H/P

Subsoiler - G XL

Subsoiler G XL is designed for deep loosening and cultivation of soil. The subsoiler of our brand AGRO-TOM, thanks to the use of our modern tines, is adapted to perform deep loosening, up to 50 cm. Therefore, it ...

2007 Köckerling Quadro 800

• Manufacturer: Köckerling
• Model: QUADRO 800

Type: To | Width: 6,0 m | Coupler: pulled

Cultivation and seeding set - APSN RS

• Boom width: 3 meter
• Transport width: 3 meter

The APSN RS tillage and seeding set is a machine that allows us to cut crop residues, deep cultivate the soil and sow seeds in one pass. The unit is equipped with a three-row working section with spring protectio...

Cultivation and seeding set - STW

• Transport width: 3 meter

The STW tillage and seeding set is a machine designed for strip-till, which provides a great deal of agronomic benefits. Each working section is suspended on a parallelogram and is mounted to the frame with bolts...

Hydraulic hammer EDT300

• Manufacturer: Berger Kraus
• Gross weight: 95 kilogram

EDT300 (2.5-4.5T) Demolition hammer for excavator Included: -EDT300 hydraulic hammer -Hydraulic lines -Bottle with pressure gauge -2 pcs of arrowheads Specification: Pin diameter 30mm Internal width of the handle...

Chain slotting machine OM-340 4/22

Technical data: Angular adjustment of the aggregate in the range: 0° - 45° Lateral sliding of the aggregate Lubrication of the guide bar Eccentric pressure Manual override Overall dimensions:

Chain slotting machine RGA SM-150 2/22

Technical data: Angular adjustment of the aggregate in the range: 0° - 45° Lubrication of the guide bar Eccentric pressure Manual slide Overall dimensions:

Subsoiler - GHL

The GHL subsoiler is designed for deep loosening. The machine has a strong construction, which is essential when working at a greater depth than plowing. The use of modern tines is adapted to perform deep looseni...

Hydraulic hammer SY-350

• Manufacturer: Berger Kraus
• Gross weight: 66 kilogram

SY-350 Demolition hammer for an excavator Included: -SY-350 hydraulic hammer -Hydraulic lines -Bottle with pressure gauge -2 pcs of arrowheads Specification: Impact force approx. 220J distance between the bolts 8...

Hydraulic hammer

• Manufacturer: Berger Kraus
• Gross weight: 70 kilogram

EDT100 (0.8-2.5T) Demolition hammer for excavator Included: -EDT100 hydraulic hammer -Hydraulic lines -Bottle with pressure gauge -2 pcs of arrowheads Specification:

Subsoiler ? GW

• Working depth: 60 centimeter

The GW subsoiler is designed to break up the plow sole. The subsoiler loosens the layer of soil that is not moved by plowing and allows the soil to better soak up and oxygenate, which promotes the development of ...