Used chisel in Poland

Cultivation and seeding set - STW

The STW tillage and seeding set is a machine designed for strip-till, which provides a great deal of agronomic benefits. Each working section is suspended on a parallelogram and is mounted to the frame with bolts...

Stiga SRC 775 RG petrol soil cultivator

• Manufacturer: Stiga

Trust the power of your machine and forget about the hard and monotonous work of loosening garden beds. The SRC 775 RG will prove to be an irreplaceable tool for loosening, loosening, and leveling the soil surfa...

Cedrus GLX-GT65-2L Loncin petrol soil cultivator

• Manufacturer: Loncin

The wheel drive perfectly absorbs the forces transferred from the tillers, reduces effort during operation, and enables thorough loosening of the soil after just one pass. The wheels also facilitate rolling the m...

Hydraulic hammer EDT200

• Manufacturer: Berger Kraus

EDT200 (1.2-3.0T) Demolition hammer for excavator Included: -EDT200 hydraulic hammer -Hydraulic lines -Bottle with pressure gauge -2 pcs of arrowheads Specification: Pin diameter 30mm Internal width of the handle...

Hydraulic hammer EDT300

• Manufacturer: Berger Kraus

EDT300 (2.5-4.5T) Demolition hammer for excavator Included: -EDT300 hydraulic hammer -Hydraulic lines -Bottle with pressure gauge -2 pcs of arrowheads Specification: Pin diameter 30mm Internal width of the handle...

Chain slotting machine OM-340 4/22

Technical data: Angular adjustment of the aggregate in the range: 0° - 45° Lateral sliding of the aggregate Lubrication of the guide bar Eccentric pressure Manual override Overall dimensions:

Chain slotting machine RGA SM-150 2/22

Technical data: Angular adjustment of the aggregate in the range: 0° - 45° Lubrication of the guide bar Eccentric pressure Manual slide Overall dimensions:

Hydraulic hammer SY-350

• Manufacturer: Berger Kraus

SY-350 Demolition hammer for an excavator Included: -SY-350 hydraulic hammer -Hydraulic lines -Bottle with pressure gauge -2 pcs of arrowheads Specification: Impact force approx. 220J distance between the bolts 8...

Hydraulic hammer

• Manufacturer: Berger Kraus

EDT100 (0.8-2.5T) Demolition hammer for excavator Included: -EDT100 hydraulic hammer -Hydraulic lines -Bottle with pressure gauge -2 pcs of arrowheads Specification:

Subsoiler - GHL

The GHL subsoiler is designed for deep loosening. The machine has a strong construction, which is essential when working at a greater depth than plowing. The use of modern tines is adapted to perform deep looseni...

Subsoiler ? GW

The GW subsoiler is designed to break up the plow sole. The subsoiler loosens the layer of soil that is not moved by plowing and allows the soil to better soak up and oxygenate, which promotes the development of ...

Ploughing and ploughing unit - APSP Premium

Ploughing and plowing aggregate AP Premium is designed for tillage and soil improvement - all types of soils. The main task of the aggregate is to perform post-harvest plowing of fields up to 15 (with side blades...

Multipurpose aggregate - BW

The BW multipurpose aggregate is designed for no-till, post-till and pre-till of all types of soils. The aggregate has a four-section design. The first section is two rows of ?510 discs on rubber shock absorbers,...

Ploughing and ploughing unit - AP

• Working width: 2.4 meter

The plowing and plowing unit AP is designed for tillage and soil improvement - all types of soils. The main task of the aggregate is to carry out post-harvest plowing of fields up to 15 (with side blades) and dee...

Ploughing and ploughing unit - APH Premium

The APH Premium plowing and tillage unit is used for plowing and deeper tillage without plowing. We can perform plowing up to 15 cm with side undercuts, while deep cultivation up to a maximum of 30 cm without sid...