Building Filters
- Trusted Seller
OK International Case Erector Tape DURAFORMER2
- Manufacturer: International
OK International Model Duraformer 2, case erector / bottom taper. Case size range: 7" to 20" in Length; 6" to 16" in Width; 4" to 16" in Height. Equipped with 60" blank case magazine, Tri-Grip pneumatic erector a...
Carol Stream, IL - Trusted Seller
OK International Case Erector Bag Inserter 200
- Manufacturer: International Harvester
- Model: 200
- Horsepower: 26 hp
OK International, Model 200, bag former / inserter – cuts, inserts and cuffs bags from a roll of gusseted polyethylene layflat tubing film. Rated from 5 to 12 inserts per minute – depending on materials, applicat...
Carol Stream, IL - Trusted Seller
McDowell International Case Erector
- Manufacturer: International
McDowell International Case Erector Model number- 201 RHNSF Serial number- 890647 Erects and bottom seals RSC, HSC, AFM, and FOL style boxes Production rate- up to 30 cases per minute Multiple case size capabilit...
Harvey, LA - Trusted Seller
O/K International Corp. Supertaper 1A
- Manufacturer: International
- Model: SUPERTAPER 1A
. Max is approx. 24″ L x 20″ W x 24″ D Stainless steel frame; Side belt drives
Charleston, SC 
OK International Superformer 1 Case Erector/Taper – 15 CPM, Stainless Steel
- Manufacturer: OK InternationalOK International
72396011 Used OK International Case Erector/Taper Superformer 1. OEM 2" tape head. OEM Case Size Range: Minimums are approx. 8" L x 8" W x 6" D; Maximums are approx. 24" L x 20" W x 24' D. OEM rated at Up to 15 c...
Belvidere, IL- Trusted Seller
O/K International Corp. Superformer 1
- Manufacturer: International
- Model: SUPERFORMER 1
. Max is approx. 24″ L x 20″ W x 24″ D Notes: Stainless steel frame; Powered belt hopper
Charleston, SC - Trusted Seller
O/K International Corp. / Durable Duraformer 2 HS
- Manufacturer: International
* 2 Available * . Max is approx. 20″ L x 16″ W x 16″ D Footprint: Approx. 118″ L x 98″ W (including hopper) x 72″ H Notes: Powered belt hopper; Heavy duty welded frame; Supported by Sam Packaging (Oak Lawn, IL)
Charleston, SC - Trusted Seller
International Paper Model CaseForm 209 Case Erector
- Manufacturer: International
International Paper Model CaseForm 209 Case Erector Electrical specifications- 230 volts/3 phase/60 Hz Condition- Fair
Harvey, LA - Trusted Seller
Hartness International Model CTS30 Case Top Sealer
- Manufacturer: International
Hartness International Model CTS30 Case Top Sealer Model- CTS30 Serial number- 17-205 Type- Nordson glue system Speed- up to 30 cases per minute Case type- RSC Case size dimensions- Length minimum 6”/ Maximum 24...
Harvey, LA - Trusted Seller
Hartness Case Packer Drop Packer 825
- Manufacturer: Hartness
Hartness International, Model 825, Automatic, intermittent motion, ascending, drop case packer rated from 10 to 30 cases per minute and number of product – depending on materials, application and pack pattern. Ca...
Carol Stream, IL - Trusted Seller
Used OK International Model SUPERFORMER 1 Case Erector/Taper Stainless Steel
- Manufacturer: International
- Model: SUPERFORMER 1
Used OK International Model SUPERFORMER 1 Case Erector/Taper Stainless Steel This system was last used in a cheese plant and remains in excellent condition. Specs below Used OK International Case Erector/Taper...
- Trusted Seller
O/K International Corp. Superformer-1M
- Manufacturer: International
Speed: Up to 15 cases per minute | Case range: Maximum 18” Long x 14” Wide x 16” High | Tape head: O/K TU-55 (2-inch) 55mm | Power: 480 / 3 / 60
Boston, MA - Trusted Seller
OKI Supertaper 1A Case Sealer / Taper
- Manufacturer: OKI
. Max is approx. 24″ L x 20″ W x 24″ D Electrical: 480V / 3ph / 60Hz | Controls: AB MicroLogix 1500 PLC | Closure: OEM 2″ tape head | Case sizes: Min is approx. 8″ L x 5″ W x 3″ D | Footprint: Approx. 80″ L x 42″...
Charleston, SC - Trusted Seller
OKI Superformer 1 Case Erector / Taper
- Manufacturer: OKI
. Max is approx. 24″ L x 20″ W x 24″ D Notes: Stainless steel frame; Powered belt hopper
Charleston, SC - Trusted Seller
OKI Duraformer 2HS Case Erector / Taper (2 Available)
- Manufacturer: OKI
* 2 Available * . Max is approx. 20″ L x 16″ W x 16″ D Footprint: Approx. 118″ L x 98″ W (including hopper) x 72″ H Notes: Powered belt hopper; Heavy duty welded frame; Supported by Sam Packaging (Oak Lawn, IL)
Charleston, SC
