Used cap/lid handling

Del Packaging Capper Over Lidder ASRL-CC

• Manufacturer: Del Packaging

Del Packaging Model ASRL-CC Adjustable spinning rod, overlidder rated from 10 to 120 containers per minute – depending materials and appllication. Lid size range of 2" to 7" OD x 2" to 12" High containers and is ...

Del Packaging Capper Over Lidder ASRL-CC-401

• Manufacturer: Del Packaging

Del Packaging, Model ASRL-CC-401, automatic, stainless steel, inline overlidder with inclined cleated and centrifugal feeders. Rated from 50 to 300 containers per minute – depending on materials, application and ...

Del Packaging Capper Over Lidder ASRL-CC-401

• Manufacturer: Del Packaging

Del Packaging, Model ASRL-CC-401, automatic, stainless steel, inline overlidder with inclined cleated and centrifugal feeders. Rated from 50 to 300 containers per minute – depending on materials, application and ...

Fill-Tech Solutions Inc. Capper Over Lidder OC

• Manufacturer: Fill-Tech Solutions Inc.

Fill-Tech Solutions, Model OC, automatic, servo driven, stainless steel, inline overlidder. Rated from 20 to 200 containers per minute – depending on materials, application and machine configuration. Equipped wit...

Accutek cap hopper/elevator/sorter

• Manufacturer: Accutek

Item is a used, Accutek, cap hopper/elevator/sorter. This is a vertical style sorter with the belt being 12" wide and the flights approximatley 4" apart. Power requirement is 120 VAC.

ENERCON CAP SEALER

• Manufacturer: Enercon

Item is a used, Enercon, heat induction cap sealer. This is a water cooled machine and has a seal bar capable of sealing up to a 38mm cap. Power requirement is single phase, 120 volt. This is a 1 KW machine drawi...

Cap/Bottle Hopper/Elevator

Used cap/bottle hopper-elevator. The machine is all stainless steel construction. The hopper is approximately 7 feet long by 6 feet wide at the top. The bottom tapers to the width of the elevator belt which is ap...

Electronics Devices Heat Induction Cap Sealer Sigma I NEO

• Manufacturer: Sigma
• Model: I NEO

Item is a used, Electronics Devices, model Sigma I NEO, heat induction cap sealer. Machine has a power output of 1.5 KW and is air cooled. Input power requirement is 230 volt/single phase.

Inline Filling Systems Cap Hopper/Elevator

• Manufacturer: In-Line

Item is a used cap hopper/elevator manufactured by Inline Filling Systems. The discharge height is approximately 8 feet from the floor. The elevator belt has 9" wide flights that are 2 1/2' deep and 8 " apart on ...

2013 NJM Packaging BTORQCA-AO1 Cap Hopper/Elevator/Sorter

• Manufacturer: NJM

Item is a used NJM Packaging Cap Hopper/Elevator/Sorter. Machine is S/S construction with the hopper being approximately 42" x 42" at the top. The flights are 10" wide and spaced at approximately 3" intervals. Th...

NEW ENGLAND MACHINE CAP HOPPER/ELEV.ATOR/SORTERATOR

Item is a used New England Machine, S/S cap hopper/elevator-sorter. The elevator is 20" wide and approximately 8' tall. This is a vertical (waterfall style) cap sorter. It was utilized with NEM dual head capper (...

Aesus Inline Cap Tightener – Retorquer

• Manufacturer: Aesus
• Model: Ecocap

Aesus Inline Cap Tightener – Retorquer – Year 2005 Retorquers are machines designed to reapply torque to caps or closures after an initial sealing process . The Aesus model ECOCAP IV In-Line Cap Retorquer is a p...

Anchor S/S Steam capper

• Manufacturer: Anchor

Item is a used, Anchor, S/S steam capper. Included with the machine is the cap sorter and S/S electrical control panel (460/3/60). Machine has a 4 1/2" wide S/S conveyor bed. The machine is capable of speed of up...

Pack West Model A120 "Torquer"

• Manufacturer: Pack West

Item is a used, Pack West model A-120, fully automatic, cap torquer. The machine is designed to apply additional torque to caps having the threads previously engaged with the container, It is often utilized after...