Used bottle pasteurizer

Pasteurizer 250 GAL

250 Gallon, 304 stainless steel, mixing tank and heat exchange system. Vessel dimensions: 42" diameter with a 42" straight wall, dome top and slant bottom with (1) 3½" OD / 3" ID tri-clamp discharge with 18" grou...

2015 KHS Pasteurizer

• Manufacturer: KHS

Setup for Juice, 50 Gallons/Minute, Incoming Product Temperature 65ºF minimum – incoming product temperature max is 85ºF, Target Hold Time 15 seconds, 460 Volts, 3PH, 60HZ, Water 40 PSIG, Air 80 PSIG, Steam PSIG,...

GC Evans Pasteurizer

• Manufacturer: Evans

There are three basic models of the GC Evans Pasteurizer. All GC Evans Sales Pasteurizers are designed to require the minimum of mechanical maintenance. All key components are accessible and easily replaced. GC E...

2016 Corosys Flash Pasteurizer

• Manufacturer: Corosys

Installed January 2016, Last Supported a 6 Head Automatic Keg Filling Line for Brewery, Very Good Condition, 460 Volts, 3 Phase, 60HHZ, Siemens PLC with Dan Foss VFD Drives, Fully Operational, Operating Manuals I...

APV Pasteurizer SR2-R-14

• Manufacturer: APV

Pasteurizing system with a 30 Gallon, stainless steel, tank and heat exchange system. Vessel dimensions: 25½" diameter with a 17" straight wall, dome top and slant bottom. Equipped with a 7½ HP Ampco centrifugal ...

Pro Engineering / Manufactorin Pasteurizer Tunnel 15030FA

• Manufacturer: Pro Engineering / Manufactorin

Pro Engineering, Model Slim / Line 15030-FA is (2) tier, stainless steel, belt POUCH tunnel pasteurizer with (3) zones for pasteurizing, warming and cooling with amount of product per hour – depending on material...

3 USED UHT/HTST PASTEURIZERS WE HAVE FOR SALE

MICROTHERMICS UHT/HTST LAB 25 DIPW DIRECT STEAM PASTEURIZATION SYSTEM REBUILT HTST TUBULAR PASTEURIZER - 2016 GOODNATURE FPXT-264 HTST FLASH PASTEURIZER

Mobius Packaging PT8579

• Manufacturer: Mobius Packaging

14 Week Lead Time Required Stainless Steel Construction Frame Setup for 350 Cans/Minute 470 Square Feet of Processing Area Single Heat Exchanger for Controlling all the Processing Zones Built new and never instal...

Pavan PV-HE150/18

• Manufacturer: Pavan

2013 PAVAN PV-HE150/18 PASTEURIZER. With Pavan Pre-Dryer Model 150 is designed to be placed after the pasteurizer to dry the product with hot air, with a customizable percentage of humidity. The Pre-Dryer is cons...

APV 75 HP

• Manufacturer: APV

Used APV pasteurizer on unitized base. Equipped with APV plate heat exchanger, sanitary centrifugal pumps, retention tube, balance tank, high pressure pump, APV jacketed Liquifier, jacket rated 75 psi @ 350°F; 75...

2004 Feldmeier Tube in Tube

• Manufacturer: Feldmeier

Feldmeier tube in tube pasteurizer/heat exchanger, 22 Feet long x 5 feet wide, Last heated product to 190ºF, Hold time of 25 seconds at 150 Gallons/Minute with extended holding tubes, heat extraction hood, Balanc...

US Bottlers PGF 72

• Manufacturer: US Bottlers

72 Valve Rotary Bottle Filler, Last setup to run 16oz Glass Hot Fill Bottles, Speeds up to 750 Bottles/Minute on 16 ounce glass, Pressure Gravity Filling with Return to Pasteurization System, Stainless Steel Cons...

US Bottlers PGF 72

• Manufacturer: US Bottlers

72 Valve Rotary Bottle Filler, Last setup to run 16oz Glass Hot Fill Bottles, Speeds up to 750 Bottles/Minute on 16 ounce glass, Pressure Gravity Filling with Return to Pasteurization System, Stainless Steel Cons...