Used automation in 14 Brandenburg, Germany

SORTIMAT vibratory feeder

• Manufacturer: Sortimat

Vibratory feeder, sorting vibrator, without bowl SORTIMAT SM 3 ( SM3 ) approx. 0.3 m connection cable used, tested ! without boiler !

PAGUS trapezoidal threaded spindle

• Manufacturer: Pagus

Trapezoidal thread spindle, threaded spindle, with nut PAGUS Shaft thread: M20 x 1.0, thread length: 19 mm Shaft diameter: Ø 25 mm, length: 37 mm Shaft diameter: Ø 30 mm, length: 27 mm Shaft diameter: Ø 40 mm, le...

SLMATIC vibratory feeder

Vibratory feeder, sorting vibrator, SLmatic Type 2002 approx. 1.0 m connection cable with plug without cover and side panel ! used, tested !

MEHAG vibratory feeder

Vibratory feeder, sorting vibrator, MEHAG approx. 0.5 m connection cable with plug New !

THK ball screw with nut

Ball screw with nut, ball screw drive THK BLK2525D Thread: Ø 25 mm Shaft piece: Ø 15 mm, length: 27 mm, groove width: 5 mm Thread: M20 x 1.0, length: 14 mm, groove width: 5 mm Bearing seat: Ø 20 mm, length: 25 mm...

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4011-176D-C2Z 98L6-0067 Thread: Ø 40 mm Shaft piece: Ø 28 mm, length: 57 mm Thread: M30 x 1.5, length: 27 mm Bearing seat1: Ø 30 mm, length: 27 mm Bearing seat2: Ø 30 mm...

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4014-124D-C2Z 98L6-0035 Thread: Ø 40 mm Shaft piece: Ø 28 mm, length: 57 mm Thread: M30 x 1.5, length: 27 mm Bearing seat1: Ø 30 mm, length: 27 mm Bearing seat2: Ø 30 mm...

SCHUNK angular gripper

• Manufacturer: Schunk

Angular gripper, 2-finger angular gripper SCHUNK GM 400 313098 used, tested !

REXROTH ball screw spindle

• Manufacturer: Bosch - Rexroth

Ball screw with nut, ball screw drive REXROTH 685 x Ø 24 mm Thread: Ø 24 mm Shaft stub: Ø 17 mm, length: 15 mm stub shaft: Ø 15 mm, length: 30 mm with ball nut: R51324014 used, tested !

SCHUNK robot module

• Manufacturer: Schunk

Robot module, standard SCHUNK VERO-S NSR 160 471915 Suitable clamping bolt: AT294 used, tested !

SCHUNK centric gripper

• Manufacturer: Schunk

Centric gripper, 3-finger gripper SCHUNK PZN+80/1 303311 2,0 - 8,0 bar used, tested !

KÄHNY vibratory feeder

Vibratory feeder, sorting vibrator KÄHNY SPECIAL MACHINES SG270L 3x electromagnet: WS 7/27 220 V 55 Hz, 156 VA approx. 0.6 m connection cable used, tested !

SMC universal gripper

Universal gripper, 2-finger parallel gripper SMC MHS2-63D 0,1 - 0,6 MPa ( 1 - 6 bar ) New !

TÜNKERS substructure clamps

• Manufacturer: Tünkers

Underframe clamp, pneumatic power clamp, with retractable centering pin and integrated clamping hook TÜNKERS SZD 50 UZ SZD 50 UZ 29.9-0.05 ( SZD50UZ29.9-0.05 ) Centering pin: Diameter: Ø 30 mm, length ( extended ...

POLYMATIC pneumatic power clamp

Pneumatic power clamp POLYMATIC 14731.G40.30F.28.P483404018.4197 Two position sensors Pneumatic cylinder: JOUCOMATIC trinorm CNOMO A3700703 PCN540 A 50-C New !