Used automation in Berlin, Germany

SORTIMAT vibration feeder

• Manufacturer: Sortimat

Vibration feeder, sorting shaker, without bowl SORTIMAT SM 3 (SM3) approx. 0.3 m connection cable used, tested! without bowl!

PAGUS trapezoidal threaded spindle

• Manufacturer: Pagus

Trapezoidal thread spindle, threaded spindle, with nut PAGUS Shaft thread: M20 x 1.0, thread length: 19 mm Shaft diameter: 25 mm, length: 37 mm Shaft diameter: 30 mm, length: 27 mm Shaft diameter: 40 mm, length: ...

SLMATIC Vibrationszuführgerät

Vibration feeder, sorting shaker, SLmatic Type 2002 Approx. 1.0 m connection cable with plug Without cover and side panel! Used, tested!

MEHAG vibration feeder

Vibration feeder, sorting shaker, MEHAG approx. 0.5 m connection cable with plug New!

THK ball screw with nut

Ball screw with nut, ball screw drive THK BLK2525D Thread: �� 25 mm Shaft piece: �� 15 mm, Length: 27 mm, Groove width: 5 mm Thread: M20 x 1.0, Length: 14 mm, Groove width: 5 mm Bearing seat: �� 20 mm, Length: 25...

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4011-176D-C2Z 98L6-0067 Thread: Ø 40 mm Shaft piece: Ø 28 mm, length: 57 mm Thread: M30 x 1.5, length: 27 mm Bearing seat1: Ø 30 mm, length: 27 mm Bearing seat2: Ø 30 mm...

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4014-124D-C2Z 98L6-0035 Thread: Ø 40 mm Shaft piece: Ø 28 mm, length: 57 mm Thread: M30 x 1.5, length: 27 mm Bearing seat1: Ø 30 mm, length: 27 mm Bearing seat2: Ø 30 mm...

SCHUNK angular gripper

• Manufacturer: Schunk

Angular gripper, 2-finger angular gripper SCHUNK GM 400 313098 Used, tested!

REXROTH ball screw spindle

• Manufacturer: Bosch - Rexroth

Ball screw with nut, ball screw drive REXROTH 685 x 24 mm Thread: 24 mm Shaft end: 17 mm, Length: 15 mm Shaft end: 15 mm, Length: 30 mm with ball nut: R51324014 Used, tested!

SCHUNK robot module

• Manufacturer: Schunk

Robot module, standard SCHUNK VERO-S NSR 160 471915 Suitable clamping bolt: AT294 used, tested !

SCHUNK centric gripper

• Manufacturer: Schunk

Centric gripper, 3-finger gripper SCHUNK PZN+80/1 303311 2.0 - 8.0 bar Used, tested!

KÖHNY vibration feeder

Vibration feeder, sorting shaker KÖHNY SPECIAL MACHINES SG270L 3x electromagnet: WS 7/27 220 V 55 Hz, 156 VA approx. 0.6 m connection cable used, tested!

SMC universal gripper

Universal gripper, 2-finger parallel gripper SMC MHS2-63D 0,1 - 0,6 MPa ( 1 - 6 bar ) New !

T��NKERS substructure clamp

Substructure clamp, pneumatic power clamp, with retractable centering mandrel and integrated clamping hook TÜNKERS SZD 50 UZ SZD 50 UZ 29.9-0.05 (SZD50UZ29.9-0.05) Centering mandrel: Diameter: 30 mm, Length (exte...

POLYMATIC pneumatic power clamp

Pneumatic power clamp POLYMATIC 14731.G40.30F.28.P483404018.4197 Two position sensors Pneumatic cylinder: JOUCOMATIC trinorm CNOMO A3700703 PCN540 A 50-C New !