Used automatic in Neuchâtel, Switzerland

MULTISPINDLE LATHE TORNOS SAS16

• Manufacturer: Tornos
• Model: SAS16

USED MULTISPINDLE LATHE TORNOS SAS16 Equipped with : 1 Pick up + brake 1 Tapper 3 Independents 1 Set of tool holders 1 Set of fixed drills 1 Drum + support

1990 MULTISPINDLE LATHE WICKMAN 1”3/4

• Manufacturer: Wickman

USED MULTISPINDLE LATHE WICKMAN 1”3/4 Equipped with : 1 Pick up 1 Spindle stop system 2 Independents 1 Chips Conveyor 1 Tapping machine 1 Recessing Device 1 Pneumatic parts collector 1 Electro magnetic clutch sys...

REBUILT MULTISPINDLE LATHE TORNOS SAS16

• Manufacturer: Tornos
• Model: SAS16

1 REBUILT MULTISPINDLE LATHE TORNOS SAS16 Equipped with : 1 Pick up + brake 3 Independents 1 Set of toolholders 1 Set of drills 1 Drum + support 1 Speed variation system cam spindle driven by a SIEMENS PLC

MULTISPINDLE LATHE TORNOS AS14

• Manufacturer: Tornos
• Model: AS14

USED MULTISPINDLE LATHE TORNOS AS14 This MULTISPINDLE LATHE TORNOS AS14 is equipped with : 1 Pick up + brake 2 Independents 1 Set of standard drills 1 Drum + support

MULTISPINDLE LATHE TORNOS AS14

• Manufacturer: Tornos
• Model: AS14

USED MULTISPINDLE LATHE TORNOS AS14 This MULTISPINDLE LATHE TORNOS AS14 is equipped with : 1 Pick up + brake 2 Independents 1 Set of standard drills 1 Drum + support

MULTISPINDLE LATHE WICKMAN 1”

1 USED MULTISPINDLE LATHE WICKMAN 1” Equipped with : 2 Independents 1 Drum + Support 1 Chips conveyor

MULTISPINDLE LATHE WICKMAN 1”6 S

• Manufacturer: Wickman

1 USED MULTISPINDLE LATHE WICKMAN 1”6 S Equipped with : 1 Pick up 1 Spindle stopping device 2 Independents 1 Drum + Support

MULTISPINDLE LATHE WICKMAN 1”

• Manufacturer: Wickman

1 USED MULTISPINDLE LATHE WICKMAN 1” 6 Spindles Equipped with : 1 Pick up 2 Independent Slides 1 Chip Conveyor 1 Drum + Support

1981 MULTISPINDLE LATHE WICKMAN 5 5/8 X 6

• Manufacturer: Wickman

1 USED MULTISPINDLE LATHE WICKMAN 5 5/8 X 6 6 Chucks Ø 130 - 2 Jaws Hydraulic clamping Electro-magnetic clutch Spindle stopping system Spindle indexing Threading attachment independant station N°5 Chip removal co...

2000 TORNOS DECO 2000/13

• Manufacturer: Tornos
• Model: Deco 2000

Main spindle Counter-spindle Guide bush holder 1 Guide bush holder 2 End attachment Secondary operation Power supply Machine hours Rotating guide bush Parts catcher Ejection of workpiece Coolant tank

TORNOS R 10

• Manufacturer: Tornos
• Model: R10

Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...

TORNOS M 4

• Manufacturer: Tornos

Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...

TORNOS R 10

• Manufacturer: Tornos
• Model: R10

Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...

ESCO D 4

• Manufacturer: Esco

Diameter of work admitted: 4 mm | With flat cames: 24 mm | With feed device 11.2: 58 mm | Spindle hole: 4 mm | Number of tool cutters: 2 | Number of spindle speeds: 2 | From: 4000 t/min | Up to: 6000 t/min | Vol...

TORNOS M 7

• Manufacturer: Tornos
• Model: M7

Diameter of work admitted: 7 mm | With flat cames: 60 mm | Spindle hole: 8 mm | Max. treading diameter: 6 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1400 t/min | Up to: 10000 t/min | Vo...