Building Filters
2021 Panasonic/Matsushita Electric Industrial YD-350GR3
- Manufacturer: Matsushita
Rated output current: 350A Rated input voltage: 36V If there is any discrepancy between the description and the actual product, the actual product will take precedence.
Toyohashi, Japan
2001 Nakamura Tome WT250
- Manufacturer: Nakamura tome
- Model: WT-250
FANUC18i-T,. Swing over bed:250mm,, Max. Max. machining: ø250*555mm,. S:(X1)195*(Z1)600*(X2)195*(Z2)600*(Y)±41mm, Main spindle: 4500rpm(variable speed), Sub spindle: 4500rpm(variable speed) Sub spindle: 4500rpm(v...
Toyohashi, Japan
2004 Nakamura-Tome Precision Industry WT-150
- Manufacturer: Nakamura
Opposed 2-spindle, 2-turret type FANUC-18iTB, Swing:190mm, Max. machining: 190*400, S:X1157.5*X2167.5*Z1465*Z2465*Y±Y S:X1157.5*X2167.5*Z1465*Z2465*Y±35 L spindle: 5000rpm (non-step), R spindle: 5000rpm (non-step...
Toyohashi, Japan
2017 DMG Mori Seiki AA-1
- Manufacturer: DMG Mori
Parallel 2-spindle lathe, Control: FANUC 0i-TF Control: FANUC 0i-TF, Standard workpiece: Φ50×50mm Travel: (X)147.5(Y)50(Z)170㎜, Milling speed: (X direction)MAX10,000(Z direction)MAX5,000min, Tool post: octagonal ...
Toyohashi, Japan
2014 Takamatsu XW130
- Manufacturer: Takamatsu
FANUC 0i-TD,. Max. processing: 280*155mm dia. Swing: 250mm dia. Main spindle through-hole diameter: φ61mm, 4000rpm 4000rpm, S:X150*Z150mm S:X150*Z160mm, 8-inch chuck, 8 square turrets Each octagonal turret, with ...
Toyohashi, Japan
1996 Okuma LH35-N
- Manufacturer: Okuma
- Model: LH35N
OSP7000L,. Swing over bed: 610mm,. Distance between centers:1000mm, S:X405*Z1000mm, V6 turret, H4 turret H4 tool rest, 500mm 4-jaw chuck 500mm 4-jaw chuck (Kitagawa IA8-500), with With chip controller (right hand...
Toyohashi, Japan
2017 DMG Mori Seiki AA-1
- Manufacturer: DMG Mori
Parallel 2-spindle lathe, Control: FANUC 0i-TF Control: FANUC 0i-TF, Standard workpiece: Φ50×50mm Travel: (X)147.5(Y)50(Z)170㎜, Milling speed: (X direction)MAX10,000(Z direction)MAX5,000min, Tool post: octagonal ...
Toyohashi, Japan
1998 Takizawa Ironworks TAC510×1000
- Manufacturer: Takizawa Iron Works
FANUC 20T,. Swing over bed:510mm,. Distance between centers:1000mm, S:X285*Z955mm, 15 to 1500rpm, 3-jaw 10-inch chuck (Kitagawa JN10T), with splash cover With splash cover If there is any discrepancy between the ...
Toyohashi, Japan
2002 Techno Washino C3
- Manufacturer: Washino
- Model: C3
FANUC-21i-T, Swing above bed: φ550mm, Center distance: 800mm, S: 340mm x 650mm, 23-1800 rpm (16 speeds), 3-jaw 9-inch chuck *If there are any discrepancies between the product description and the actual product, ...
Toyohashi, Japan
2004 Miyano BNE-34SY
- Manufacturer: Miyano
- Model: BNE34SY
FANUC18i-T,. Max. machining: Main/sub dia. 34*90mm, Upper turret 12 square, S:X150*Z380*Y±40mm S:X150*Z380*Y±40mm, Lower turret 10 square, S:X115*Z1212mm S:X115*Z125mm, Sub B-axis Sub B-axis, Main and sub Main an...
Toyohashi, Japan
1997 Mori Seiki LL-8B
- Manufacturer: Mori Seiki
- Model: LL-8B
MF-T5(MSC-515),. Swing over bed: 1310mm, Distance between centers: 2500mm, Main spindle through-hole diameter: ø260mm, S:X715*Z2472mm S:X715*Z2472mm, Tool post: opposed 4-page tool post + front 4-page tool post, ...
Toyohashi, Japan
2016 Tsugami M06SY
- Manufacturer: Tsugami
- Model: M06SY
FANUC-0iTD,. Max. machining: ø260/ø51 (bar material)*380mm, Main spindle through-hole diameter: φ73mm Main spindle 4500rpm, Rear spindle 4500rpm Back side 4500rpm, Milling 5000rpm Milling 5000rpm, 12 square turre...
Toyohashi, Japan
2018 Murata Machinery MW50HG
- Manufacturer: Murata
MURATA-FANUC32iB, Maximum machining capacity: φ50*50mm, 2 gang tool rests, 6-inch chuck, 6000 rpm *If there are any discrepancies between the product description and the actual product, the actual product will ta...
Toyohashi, Japan
2016 Murata Machinery MW80
- Manufacturer: Murata
MURATA-FANUC32iB, Maximum cutting speed: φ80*50mm, S:(X)320*(Z)200mm 6000rpm, Gang tool post x 2 *If there are any discrepancies between the product description and the actual product, the actual product will tak...
Toyohashi, Japan
Nakamura-Tome TW-10MM
- Manufacturer: Nakamura
- Model: TW-10MM
FANUC 18i-T,. Swing: 210mm dia. Max. processing: ø210*155mm, 55～5500rpm, ATC:12*2 pcs. In case of any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan