Building Filters
MULTIPOST TEST BENCH EBV-CC3V60H
3 x 15 ton test bench with automatic actuators, type 2 and type 7 clamping Three-station vertical test bench with internal radial clamping. Valve length adjustment is achieved by a threaded column on the upper si...
Eybens, France
BPA-250K Actuator Test Bench
Rated torque: 250.000 Nm | Range: 10-100% | Torque measurement: Indirect | Range of angles: 0��� ��� 90��� | Reset: -5,0��� ��� +5��� | Dynamic test simulation: Dynamic brake | Dimensions: 2700 x 2600 x 1600
Eybens, France
Assembly line BO-CV/40SA
It is also possible to test a very wide range of valves of different sizes. This is made possible by the bench, which is positioned both vertically and horizontally depending on the valve being tested. The entire...
Eybens, France
PRESSURE UNIT THINK PC PROGETTI SKC-100
Pressure skid for cycle resistance in the trunnion vehicles. The system provides a total flow rate of 0.7 l/min (0.5 l/min in the downward direction and 0.2 l/min in the cavity). The control system can be connect...
Eybens, France
TESTREC certification software
The program can be used with all PROGETTI PC test benches. It is equipped with a MODBUS interface for SKM skids and a SYSWAY interface for SKA skids with Ethernet or RS232 communication protocol. Easy to set up, ...
Eybens, France
TUBE TEST BENCH BOT45-2V250
Test bench for pipes with type 2 "internal radial" or 8 "self-adapting overpressure joints" for pipes with an elliptical shape error. The reaction bridges are connected by threaded columns that allow the maximum ...
Eybens, France
Vertical test bench BV-PMC/650W
The compression force is controlled automatically and proportionally to the water pressure inside the valve. The movable bridge in the upper part allows the valve to be loaded and also provides the possibility of...
Eybens, France
BOT-2CSC/1200 tube test bench
Tube test bench with combined clamping: internal radial clamping + pressure clamping system. The mobile bridge is moved by a hydraulic motor. Loading is carried out vertically by a crane, while final positioning ...
Eybens, France
PROGETTI THINK PC HORIZONTAL TEST BENCH BO-C/90SH
90 TON Test Bench with Type 1 Clamping Horizontal test bench with pressure clamping. The pressure force is automatically configured according to the valve size and class, adapting proportionally to the pressure i...
Eybens, France
Horizontal test bench BO30-2CV/500
Test bench with combined clamping: internal radial clamping + pressure clamping system. The movable bridge moves on two threaded screws that ensure the total absence of external forces on the valve body, while a ...
Eybens, France
Horizontal test bench BO-2V/450SH
The mobile bridge moves forward on two threaded screws that ensure the complete absence of external forces on the valve body. Thanks to this feature, the bench complies with international testing standards. In th...
Eybens, France
Horizontal test bench BO45-2CV/3000
Two clamping systems are available: pressure clamping and internal radial clamping. The bench is equipped with two threaded screws. The mobile bridge is moved by a hydraulic motor. Loading is carried out vertical...
Eybens, France
Horizontal test bench BO-2V/1800
The mobile reaction bridge moves via two screwed columns that ensure the complete absence of external forces on the valve body. This feature makes it compliant with international testing standards. In the lower p...
Eybens, France
BOT-2CV/2000 tube test bench
Tube test bench with combined clamping: internal radial clamping + pressure clamping system. The mobile bridge is moved by a hydraulic motor. Loading is carried out vertically by a crane, while final positioning ...
Eybens, France
BV-5C HE/10 vertical test bench
Reaction force: 10 T | Permitted products: Natural gas pressure reducer range �����-3 (DN15-DN80) | Maximum length: 400 mm | Length min: 140 mm | H max: 400 mm | H min: 140 mm | Permitted terminations: BW RJ | D...
Eybens, France