Used automated in suisu

10HP Baldor / Nord Helical Inline Gearmotor 4.58:1 Ratio, 392RPM

• Manufacturer: Baldor - Reliance

Output speed = 393 RPM. Output Tourque: 4,385 IN/LBS Gear: Nord SK42 helical inline Motor: Baldor TEFC, 1725RPM (230/460V, 60Hz, 3ph) Horizontal foot mounting. Used previously as a centrifugal pump drive.

12" Dia. Semco Stainless Steel Butterfly Valve w/ Pneumatic Cylinder

• Manufacturer: Semco

ITEM #: 20529 Used 12" Dia. Semco Stainless Steel Butterfly Valve w/ Pneumatic Cylinder Cast stainless steel disc and mounting flange.Connected to a pneumatic actuated cylinder (will require a control valve).Moun...

Dura Gear Right-angle Worm Gear Reducer - 15:1 Ratio

• Manufacturer: Dura Gear

Mounting frame size 325 Output shaft is Ø1.5" Shipping info: One skid, 36x36x17 Weight = 120 LBS.

1HP SEW-EURODRIVE Worm Gear Reducer - 60RPM

• Manufacturer: SEW-Eurodrive

60RPM output 867 IN-LBS torque Through-shaft bore (LH or RH) for Ø1.25" keyed shaft 240-460V, 60Hz, 3ph Total length: 17"

12" Dia. Semco Stainless Steel Butterfly Valve w/ Pneumatic Cylinder

• Manufacturer: Semco

Cast stainless steel disc and mounting flange. Connected to a pneumatic actuated cylinder (will require a control valve). Mounting flange with a 16"O.D. and a bolt circle of 14.25".

3HP Baldor-Reliance C-Face Gearmotor, 60Hz, 3Ph, 303RPM Output

• Manufacturer: Baldor - Reliance

Previously used as a horizontal-mounted pump drive. Motor: 3HP Baldor Super E, 208-230/460V, 3ph, 1760RPM, 182TC Frame Gear: Nord Gear Corp. type SK12-N180TC, 1035lb-in torque, 5.79:1 ratio, 303RPM speed Drive Co...

10HP Sumitomo Paramax Right-Angle Spiral Bevel Gear Motor PX 8065

• Manufacturer: Sumitomo

Serial No: A755752 Size 8065 Ratio: 298.235 Output RPM: 6.035 Cast iron housing, right angle shaft configuration with four gear stages. 10HP marine duty 460 volt motor, 1760RPM Horsepower rated for 20.6HP Keyed o...

0.75HP SEW Eurodrive Helical Gearmotor R Series

• Manufacturer: SEW-Eurodrive

Reduction Ratio: 15.63:1 Output RPM: 108 Output Torque: 290 IN/LB Shaft: Ø1.0" keyed 230/460V, 60Hz, 3ph Overall dimensions: 18x7x7" Weight = 34 LBS

7.5HP SEW-Eurodrive Gear Motor [15.6:1 RATIO]

• Manufacturer: SEW-Eurodrive
• Model: R77A

Output speed = 112 RPM. R77/A helical gear Mounted to a stainless steel portable pump frame.

75HP Siemens NEMA Premium Motor, 460V, 1780RPM, 365T Frame

• Manufacturer: Siemens

Type: RGZEESD Duty: Continuous 460 volt, 60Hz, 85.0Amps

75HP Siemens NEMA Premium Motor, 460V, 1780RPM, 365T Frame

• Manufacturer: Siemens

Type: RGZEESD Duty: Continuous 460 volt, 60Hz, 85.0Amps

10HP Louis Allis Combination Reduction Drive for Denver Metso Holo-Flite

• Manufacturer: Louis Allis

Previously used drive system for a Denver holo-flite dryer / screw cooler processor model D1618-6 10HP Louis Allis motor, 1760 rpm, 220/440 volt, 324 frame V-belt drive to in-line gear reducer with chain drive ou...

350 GALLON AIR RECIEVER TANK137 PSI Z24017S

350 GALLON 2.5" HOLE 2.75" HOLE 3.5" HOLE 137 PSI @ 550 DEGREES - -20 DEGREES 99" X 48" APROX.

20" x 20" x 20" GERREF S.S. Carousel Washer, Electrically Heated Wash & Blow-Off Z20060D

• Manufacturer: GERREF

AGE: 2003 SPECIFICATIONS: All Stainless Steel Construction Part Envelope, Max., Approx.: 20" Sq. Each part(s) load onto part specific fixtures 180 degrees apart mounted to the center of the rotating ...

12" x 12" x 12" MIDBROOK S.S. Carousel Washer, Gas Heated, Elect Heated B/O Z20060E

• Manufacturer: Midbrook

All Stainless Steel Construction 4-Position Carousel Part sits in a fixture that only rotates through each of the (4) stations. The part fixture does not rotate individually on the carousel. Stations: Unload / Lo...