Used automated in Switzerland

Temperature Control Unit - Huber - HTS 30-H12 - VP.052.LZ-VP.059.LZ

• Manufacturer: Huber
• Model: HTS 30-H12

Control via Pilot ONE 8 Units Available Heating: 12 kW | Max. pump: 4.7 bar at 70 L/min | Connection: G 1 1/4" | Dimensions: 940 x 1050 x 1130 mm | Weight: 273 kg

MRV 100 - Multi-Range Vacuum Gauge

Measuring device for use in the rough, fine and high vacuum ranges Can only be used with sensor Digital measuring device, USB interface and analog voltage output Clear membrane keypad Two relays for programming s...

2015 HAAS VF-4 SS

• Manufacturer: Haas
• Model: VF-4SS

Control: HAAS AUTOMATION | Number of axis simultaneous: 3 | Table length: 1321 mm | Table width: 457 mm | Number of t-channels: 5 | Distance of the t-slots: 80 mm | T-channel width: 16 mm | Table load max.: 800 ...

2011 DRYPOINT RA 100

• Manufacturer: DRYPOINT

Nominal volume flow: 630 m3/h | Max. inlet temperature: 70 °C | Machine's weight about: 94 kg | Length: 625 mm | Width: 555 mm | Height: 975 mm

2020 FANUC A06B-0143-B300 Alpha12/3000

• Manufacturer: Fanuc
• Model: A06B-0143-B300

Rotation speed: 3000 t/min | Voltage 50 hz 3x: 220 Volt | Engine power: 2 kW | Weight: 15 kg

2020 FANUC A06B-0227-B300 Alpha IF 8/3000

• Manufacturer: Fanuc
• Model: A06B-0227-B300

Rotation speed: 3000 t/min | Voltage 50 hz 3x: 220 Volt | Engine power: 2 kW | Weight: 15 kg

2011 KUKA KR 240 L210-2 2000

• Manufacturer: Kuka
• Model: KR 240
• no. of axis: 6 axis

Pallets on video available separately Number of axis total: 6 | Max. load: 210 kg | Workspace: 2900 mm | Repeatability: 0.06 mm | Weight: 1’277 kg | Length: 1006 mm | Width: 1006 mm

2012 HSS DKB 110

• Manufacturer: HSS

Filling quantity max.: 4 kg | Cooling capacity: 11 kW | Maximum pressure: 30 bar | Voltage 50 hz 3x: 400 Volt | Total installed power: 6.5 kW | Machine's weight about: 100 kg | Length: 800 mm | Width: 800 mm | H...

1988 IMA K150 Cartoning machine

• Manufacturer: IMA
• Model: K150

Autom. cartoning machine incl. autom. bottle feeder (from turntable Ø 800 mm), blister feeder from magazine, leaflet feeder for pre-folded leaflets etc. PLC: IDEC, type FA-1.

1995 Coil Reel Ref No: 45871

Hydraulically actuated upper clamp arm Motorised winder with geared motor Hydraulic opening of mandrel blades Coil lifting carriage with 250 mm stroke On the sides of the winder, there are two hydraulic cylinders...

Coil Reel Ref No: 43187

Object: 43187 | Design: single reel | Sheet width max.: 170 mm | Coil weight max.: 0.5 to | Max. diameter of coil: 1215 mm | Mandrel expansion range from: 365 mm | Mandrel expansion range up to: 525 mm | Fe...

1993 DREHER WAV 1125D Ref No: 38731

• Manufacturer: Dreher

With motorized lifting system for height adjustment to the dies. Control and engines SIEMENS. Regulation of pneumatic roller pressure. Roller diameter 125 mm.

TIGO D3R Ref No: 47877

• Manufacturer: TIGO

Object: 47877 | Design: single reel | Sheet width max.: 160 mm | Max. diameter of coil: 800 mm | Mandrel expansion range from: 200 mm | Mandrel expansion range up to: 520 mm

FEINTOOL GKP 160 Ref No: 43971

• Manufacturer: FEINTOOL

Strip feed unit (without servo) for GKP or MFA 160T Strip thickness: 6 mm Strip width: 210mm DYNABOX 45 MEDIUM gearbox It is recommended to use: Servo motor BECKHOFF AM8543-0E20 Resolution 0.1mm