Used automated in Neuchâtel, Switzerland

DC MOTOR WITH PERMANENT MAGNET “ESTAN” TYPE GfmO 8/4

180V – 75W – 0,52A – 3000min-1 – IP44

MOTOR “GRUNDFOS” TYPE MG 100 LA4

• Manufacturer: Grundfos
• Model: MG100LA4

220/380V – 50Hz – 0.7/5.6A – 1410 min-1 Weight: 18 kg

2010 HAAS VF-3SSAPC

• Manufacturer: Haas
• Model: VF-3
• Spindle taper: CT 40

Control: HAAS AUTOMATION | Number of axis total: 3 | Table length: 1219 mm | Table width: 457 mm | Table load max.: 794 kg | Longitudinal travel (x-axis): 1016 mm | Transversal travel (y-axis): 508 mm | Vertical...

2011 DRYPOINT RA 100

• Manufacturer: DRYPOINT

Nominal volume flow: 630 m3/h | Max. inlet temperature: 70 °C | Machine's weight about: 94 kg | Length: 625 mm | Width: 555 mm | Height: 975 mm

2020 FANUC A06B-0143-B300 Alpha12/3000

• Manufacturer: Fanuc
• Model: A06B-0143-B300

Rotation speed: 3000 t/min | Voltage 50 hz 3x: 220 Volt | Engine power: 2 kW | Weight: 15 kg

2012 HSS DKB 110

• Manufacturer: HSS

Filling quantity max.: 4 kg | Cooling capacity: 11 kW | Maximum pressure: 30 bar | Voltage 50 hz 3x: 400 Volt | Total installed power: 6.5 kW | Machine's weight about: 100 kg | Length: 800 mm | Width: 800 mm | H...

2020 FANUC A06B-0227-B300 Alpha IF 8/3000

• Manufacturer: Fanuc
• Model: A06B-0227-B300

Rotation speed: 3000 t/min | Voltage 50 hz 3x: 220 Volt | Engine power: 2 kW | Weight: 15 kg

MRV 100 - Multi-Range Vacuum Gauge

Measuring device for use in the rough, fine and high vacuum ranges Can only be used with sensor Digital measuring device, USB interface and analog voltage output Clear membrane keypad Two relays for programming s...

2015 HAAS VF-4 SS

• Manufacturer: Haas
• Model: VF-4SS

Control: HAAS AUTOMATION | Number of axis simultaneous: 3 | Table length: 1321 mm | Table width: 457 mm | Number of t-channels: 5 | Distance of the t-slots: 80 mm | T-channel width: 16 mm | Table load max.: 800 ...

Nordson EFD Lot de 12 contrôleurs - ValveMate 7100

• Manufacturer: EFD

The Valve Mate 7100 controller ensures the main control of the deposit size. Fluid deposit control. Used Machine tools for sale

Temperature Control Unit - Huber - Unichiller 180TW-H18 - VP.046.LZ-VP.051.LZ

• Manufacturer: Huber

Control via Pilot ONE 6 Units Available Heating: 18 kW | Max. cooling: 18 kW | Max. pump: 4.7 bar at 30 L/min | Connection process: G 1 1/4" | Connection cooling water: G 3/4" | Dimensions: 760 x 920 x 1612 mm |...

1998 STÄUBLI RX60CR

• Manufacturer: STÄUBLI

RX60CR from 1998 with its cabinet CS7B RX60B from 2002 Used Machine tools for sale

2018 FANUC 2 x ROBODRILL ALPHA-D21MiB5 + Robot M-10iA

• Manufacturer: Fanuc
• Model: M-10iA
• no. of axis: 5 axis

MILLING SPINDLE LINEAR AXES TOOL CHANGER TABLE - Distance table / spindle nose (min./max.) : 250 - 580 [mm] POWER SUPPLY WEIGHT & DIMENSIONS MACHINE HOURS - Machine 1 : Number of hours under power : 30.387 [h] - ...

2006 SCAGLIA 2PNPSXC080

• Manufacturer: SCAGLIA

- As per photos Used Machine tools for sale