Building Filters
Test bench for BPA-250K actuators
Rated torque: 250.000 Nm | Range: 10-100% | Torque measurement: Indirect | Angle range: 0⁰ – 90⁰ | Reset to zero: -5,0⁰ – +5⁰ | Dynamic test simulation: Dynamic brake | Dimensions: 2700 x 2600 x 1600
Eybens, France
BOR-2CV/600 Tiltable Test Stand
The mobile bridge moves on two threaded screws which ensure the total absence of external forces on the valve body. This feature makes the bench comply with the requirements of international test standards. In ad...
Eybens, France
UNIDAD DE PRESURIZACIÓN THINK PC PROGETTI SKC-100
Presurement skid for the resistance cycle in the trunnion valves. The system supplies a total flow rate of 0.7 l/min (0.5 l/min in the downstream side and 0.2 l/min in the cavity). The control system can be conne...
Eybens, France
BV-PMC/650W Vertical Test Stand
The compression force is controlled automatically and proportionally to the water pressure inside the valve. The mobile bridge in the upper part allows the loading of the valve and also the possibility of having ...
Eybens, France
BOT-2CSC/1200 tube test bench
Tube testing bench with combined clamping: internal radial clamping + pressure clamping system. The mobile bridge is moved by a hydraulic motor. The loading is carried out in a vertical plane by a crane, while th...
Eybens, France
Assembly line BO-CV/40SA
It is also possible to test a very wide range of valves of different sizes. This is made possible by the bank, depending on the valve declared is positioned both vertically and horizontally. The entire transport ...
Eybens, France
TESTREC certification software
The program can be used with all PROGETTI PC test benches. It is equipped with a MODBUS interface for SKM skids and a SYSWAY interface for SKA skids with Ethernet or RS232 communication protocol. Easy to set up, ...
Eybens, France
BOT-2CV/2000 tube test bench
Tube testing bench with combined clamping: internal radial clamping + pressure clamping system. The mobile bridge is moved by a hydraulic motor. Loading is carried out vertically by a crane, while the final posit...
Eybens, France
HORIZONTAL TEST BENCH THINK PC PROGETTI BO-C/90SH
90 TON test bench with clamping type 1 Horizontal test stand with pressure clamping. The pressure force is configured automatically according to the size and class of the valve, adapting proportionally to the inc...
Eybens, France
Horizontal test bench BO30-2CV/500
Test bench with combined clamping: internal radial clamping + pressure clamping system. The mobile bridge moves on two threaded screws that ensure the total absence of external forces on the valve body, while a h...
Eybens, France
BO-2V/450SH horizontal test bench
The mobile bridge moves on two threaded screws which ensure the total absence of external forces on the valve body. Thanks to this feature, the bench complies with international test standards. In the lower part,...
Eybens, France
Horizontal test bench BO45-2CV/3000
Both clamping systems are available: pressure clamping and radial internal clamping. The bench is equipped with two threaded screws. The mobile bridge is moved by a hydraulic motor. Loading is carried out in a ve...
Eybens, France
Horizontal test bench BO-2V/1800
The mobile reaction bridge is moved by two screwed columns which ensure the total absence of external forces on the valve body. This prerogative makes it compliant with international test standards. In the lower ...
Eybens, France
BV-5C HE/10 Vertical Test Stand
Response force: 10 T | Permitted products: Natural gas pressure reducing valve range ½"-3 (DN15-DN80) | Maximum length: 400 mm | Length min: 140 mm | H max: 400 mm | H min: 140 mm | Permitted terminations: BW RJ...
Eybens, France
BV-PMMV/100SH Vertical Test Stand
Vertical test bench with universal clamping. Test bench suitable for all valve terminations, ci-including 90⁰ valves. In pressure clamping, the compression force is controlled automatically and proportionally to ...
Eybens, France