Used automated in 14 Brandenburg, Germany

INA linear unit

Linear unit INA RUE 55 W3 / 2324 ( RUE55W3/2324 ) 1x linear guide rail: Length: 2324 mm 2x linear guide carriage 1x damping unit New !

INA linear unit

Linear unit INA RUE 55 W3 / 2340 ( RUE55W3/2340 ) 1x linear guide rail: Length: 2340 mm 3x linear guide carriage 1x damping unit New !

REXROTH linear guide carriage

• Manufacturer: Bosch - Rexroth

Linear guide carriage, ball carriage CS REXROTH R165149420 New !

STAR rail guide table with drive

Rail guide table, linear unit with drive, limit switch and encoder STAR (REXROTH) 1460-305-00 ID no. 69548 spindle: Ø 24 mm, pitch: 4 mm Gear ratio toothed belt drive: 1 : 1 Motor: SIEMENS 1FT5046-1AF71-3EB0 3000...

REXROTH linear guide carriage with rail

• Manufacturer: Bosch - Rexroth

Linear guide carriage, 2 pieces with linear guide rail REXROTH 2x R167131410 2x linear guide carriage: Length: 142 mm, width: 162 mm, height: 42 mm Hole spacing: 72.5 / 80 mm, 6x threaded hole: M12 x 1.75, depth:...

PAGUS hydraulic braking device

• Manufacturer: Pagus

Braking device, hydraulic PAGUS Ø 45 x 340 mm Rod: Diameter: Ø 45 mm, total length: 340 mm Rod bore: diameter: Ø 20 mm, depth: 20 mm Rod threaded hole: M8 x 1.25, depth: 18 mm Housing: Diameter: Ø 85 mm, length: ...

PAGUS hydraulic braking device

• Manufacturer: Pagus

Braking device, hydraulic PAGUS Ø 45 x 380 mm Rod: Diameter: Ø 45 mm, total length: 380 mm Rod bore: diameter: Ø 20 mm, depth: 20 mm Rod threaded hole: M8 x 1.25, depth: 18 mm Housing: Diameter: Ø 85 mm, length: ...

NSK linear guide carriage with rail

• Manufacturer: NSK

Linear guide carriage, 2 pieces with linear guide rail NSK JAPAN TS15 2x linear guide carriage: Length: 73 mm, width: 34 mm, height: 25 mm Hole spacing: 26 mm, 4x threaded hole: M4 x 0.7, depth: 5 mm Linear guide...

LINMOT linear motor with slider

Linear motor with slider LINMOT PS01-23x80-R Stator with IP67 plug M17/9(m) used, tested !

STAR linear guide carriage

Linear guide carriage, 2 pieces, with linear guide rail, linear unit STAR 1604-594-10 Linear guide rail: Cross section: 53 / 46 x 48 mm mm Article consists of two linear guide carriages and one linear guide rail ...

HIWIN linear guide carriage with rail

• Manufacturer: Hiwin

Linear guide carriage, with linear guide rail, 4 pieces HIWIN HG series size 15 Linear guide carriage: HGL 15 CA ZOH ( HGL15CAZOH ) Linear guide rail: HGR 15R-0220H ( HGR15R-0220H ) length: 220 mm, width: 15 mm, ...

EWELLIX needle roller unit

Needle roller unit, 4 pieces EWELLIX LWHW 30X325 New !

STAR rail guide table

Rail guide table, linear unit STAR 1285-212-24 Drive shaft: Ø 16 mm, length: 20 mm New !

LINMOT linear motor with slider

Linear motor with slider LINMOT PS01-37x240 Stator with approx. 0.6 m connection cable clevis with bearing seat Ø 30 / 25 x 9 mm used, tested !

STAR linear guide carriage

Linear guide carriage, ball carriage STAR 1671-394-10 Length: 143 mm, width: 162 mm, height: 43 mm Hole spacing: 80 / 72.5 + 72.5 mm, 6x threaded hole: M12 x 1.75, depth: 14 mm ( continuous )+ New !