Used automated in Berlin, Germany

SORTIMAT vibratory feeder

• Manufacturer: Sortimat

Vibratory feeder, sorting vibrator, without bowl SORTIMAT SM 3 ( SM3 ) approx. 0.3 m connection cable used, tested ! without boiler !

THK ball screw with nut

Ball screw with nut, ball screw drive THK BLK3232D Thread: Ø 32 mm Shaft piece: Ø 15 mm, length: 37 mm, groove width: 5 mm Thread: M20 x 1.0, length: 14 mm, groove width: 5 mm Bearing seat: Ø 20 mm, length: 25 mm...

KÄHNY vibratory feeder

Vibratory feeder, sorting vibrator KÄHNY SPECIAL MACHINES SG270R 3x electromagnet: E070000118 220 V 50 Hz, 0.5 A approx. 0.3 m connection cable used, tested !

AUGUST STEINMEYER Ball screw spindle

Ball screw with nut, ball screw drive AUGUST STEINMEYER GmbH 1516.523/20.63.936.1147 T5 Thread: Ø 62 mm Shaft stub: Ø 35 mm, length: 35 mm Thread: M40 x 1.5, length: 50 mm Shaft section: Ø 40 mm, length: 90 mm Ba...

GENUSTECH sheet metal centering pull-down unit

Sheet centering pull-down unit GENUSTECH PM4I2V395067T45C-052 Sensor unit: SENSTRONIC A1202R6K250111C 10 - 55 V DC approx. 0.2 m connection cable New !

SORTIMAT vibratory feeder

• Manufacturer: Sortimat

Vibratory feeder, sorting vibrator, with foot SORTIMAT SM 3 ( SM3 ) used, tested !

MEHAG vibratory feeder

Vibratory feeder, sorting vibrator, MEHAG approx. 0.5 m connection cable with plug used, tested !

PB PORTER telescopic guide

Telescopic guide PB PORTER E.160 Rod diameter 1: Ø 25 mm, flattening: 22 mm Rod diameter 2: Ø 35 mm, flattening: 32 mm Head diameter: Ø 48 mm, height: 22 mm Thread: M45 x 1.5, length: 110 mm New !

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4013-135D-C2Z 98L6-0035 Thread: Ø 40 mm Shaft piece: Ø 28 mm, length: 70 mm Thread: M30 x 1.5, length: 27 mm Bearing seat1: Ø 30 mm, length: 32 mm Bearing seat2: Ø 30 mm...

REXROTH positioning unit

• Manufacturer: Bosch - Rexroth

Positioning unit REXROTH PE 2/XP BG1 3842242350 Pneumatic cylinder: 0 822 241 137 max. 10 bar used, tested !

MEHAG vibratory feeder

Vibratory feeder, sorting vibrator MEHAG Zella-Mehlis Vibrator 6,3 L 220 V 1 AC 50 Hz 120 VA approx. 0.6 m connection cable As good as new ! (never been in use)

ROEMHELD lever clamp

Lever clamp ROEMHELD , HILMA, STARK 1825111 913886 S36 Flange: 55 x 55 mm, hole spacing: 42.5 mm Insert cylinder: Ø 30 mm, length: 31 mm New !

GENUS TECH® pneumatic clamps

Pneumatic clamps GENUS TECH® 110MPNI433 New ! 2x square: 20 x 20 x 10 mm | Mounting bracket: 80 x 54 / 74 x 16 mm | Hole distance: 62 mm | 2x drilling: 14,1 mm | Dimensions: 271 x 144 x 62 mm

REXROTH ball screw spindle

• Manufacturer: Bosch - Rexroth

Ball screw with nut, ball screw drive REXROTH 32x10Rx3,969 R15103F541 Thread: Ø 32 mm Thread: M20 x 1.0, length: 22 mm Shaft piece: Ø 20 mm, length: 25 mm Shaft section: Ø 20 mm, length: 18 mm Shaft end: Ø 18 mm,...

PAGUS trapezoidal threaded spindle

• Manufacturer: Pagus

Trapezoidal thread spindle, threaded spindle, with nut PAGUS Shaft thread: M20 x 1.0, thread length: 19 mm Shaft diameter: Ø 25 mm, length: 37 mm Shaft diameter: Ø 30 mm, length: 27 mm Shaft diameter: Ø 40 mm, le...