Used attenberg limit test

Plastic Limit Test Set (UTS-0250B.E)

• Manufacturer: UTEST

Soil Classification The plastic limit (PL) is defined as the lowest moisture content of a soil that will permit a sample to be rolled into threads of 3 mm diameter without the threads breaking. The Plastic Limit ...

Shrinkage Limit Test Set (UTS-0230)

Soil Classification Ø:55 mm h:35 mm Ø:45 mm h:10 mm When the water content of a fine-grained cohesive soil is reduced below the plastic limit, shrinkage of the soil mass continues until the shrinkage limit is rea...

Semi-Automatic Penetrometer for Liquid Limit (UTS-0180)

Soil Classification Penetration cone/s, cone test gauge and sample cups should be ordered separately. A Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liq...

Motorized & Manual Liquid Limit Device (Casagrande) (UTS-0200B)

• Manufacturer: Casagrande

Soil Classification The UTEST Manual and Motorized Liquid Limit Apparatus (Casagrande) are used to determine the moisture content at which clay soils pass from plastic to liquid state. The Devices consist of an a...

Linear Shrinkage Mould (UTS-0235)

• Manufacturer: Labequip

Soil Classification The UTS-0235, Linear Shrinkage Mould is 140 mm long and 12.5mm radius and is used for the determination of the total linear shrinkage of soils, and indicates the plastic properties of soils wi...

Mechanical End – Over – End Shaker (UTS-0170)

• Manufacturer: Labequip

Soil Classification The UTS-0170 Mechanical End-Over-End Shaker is used for the determination of the particle density by the gas jar method and the particle size distribution by sedimentation. End-Over-End Shaker...