Building Filters
- Trusted Seller
2015 HWACHEON CUTEX 160 A
- Manufacturer: Hwacheon
- Model: Cutex 160
This HWACHEON CUTEX 160 A was manufactured in 2015. It features a maximum cutting diameter of Ø300 mm, a spindle speed up to 6,000 rpm, and a 12-station turret. The machine offers rapid speeds of 36 m/min in both...
South Korea Bosch Rexroth A10VSO100DFR/31R-PKC61N00
- Manufacturer: Bosch - Rexroth
- Model: A10VSO100
“This item is new and unused, but may show signs of surface rust or dust due to long-term storage.” Product Overview This is a genuine Bosch Rexroth A10VSO100DFR/31R-PKC61N00 axial piston pump (Part No: R90250044...
$4,250 USDHanam-si, South Korea- Trusted Seller
'PRODUCTION MACHINERY CO' Coil Preparation Line
- Manufacturer: 'PRODUCTION MACHINERY CO'
‘PRODUCTION MACHINERY CO.’ Coil Preparation Line AISI 300 and 400 series 610 exit 2000 entry and exit max. 2200 mm incl. paper 4 – 10 m lenght max. 40 mm Mechanical equipment list: - Entry Coil Storage Saddle - E...
South Korea 
Disco DCS-6
- Manufacturer: Disco
Application: Disco Cleaning System | Work size: Φ8" | Applicable tape frame size: 2-8" | Table routing speed: 0~2000 rpm | Spinner discharge pressure: 100 kgf/cm²
South Korea
DS Semicon Co., Ltd. Spin Cleaning System
- Manufacturer: DS Semicon Co., Ltd.
Application: Cleaning System for Wafer | Work size: Φ8" | Applicable tape frame size: 2-8" | Table routing speed: 0~2000 rpm | Spinner discharge pressure: 100 kgf/cm²
South Korea
South Korea- Trusted Seller
'PRODUCTION MACHINERY CO' Grinding and Polishing Line
- Manufacturer: 'PRODUCTION MACHINERY CO'
‘PRODUCTION MACHINERY CO’ Grinding and Polishing Line AISI 300 and 400 Series (Annealed and Pickled) 3 - 6 mm hot rolled min. 1,000 mm 10 - 20 mpm polishing (high) min. 13,500 kg high speed 4 top side grinders (2...
South Korea - Trusted Seller
2x 'PRODUCTION MACHINERY CO' Stainless Anneal/Pickle Lines
- Manufacturer: 'PRODUCTION MACHINERY CO'
‘PRODUCTION MACHINERY CO’ Continuous Annealing & Pickling Line No. 1 max. 50 kg/mm2 annealed material max. 50 kg/mm2 hot rolled material max. 60 kg/mm2 annealed material max. 50 kg/mm2 hot rolled material 3 - 6 m...
South Korea 
DS Semicon Co., Ltd. DS-VIS
- Manufacturer: DS Semicon Co., Ltd.
Application: IR Filter Glass Inspection
South Korea- Trusted Seller
2006 DOOSAN PUMA 300 C
- Manufacturer: Doosan
- Model: PUMA 300C
This DOOSAN PUMA 300 C horizontal turning machine was manufactured in 2006. It features a 12-inch chuck, a maximum turning diameter of 350 mm, and a maximum turning length of 760 mm. The spindle supports a speed ...
South Korea 
South Korea
South Korea- Trusted Seller
'SMS' 2-Hi Skin Pass Mill
- Manufacturer: 'MANNESMANN DEMAG SACK'
‘SMS-DEMAG-SACK’ Skin Pass Mill AISI 300 and 400 Series, Cold Rolled and Annealed min. 750 mm Mill gear: ratio : I=15,197 max. 1,200 tons max. 630 mm nominal 610 mm Skin Pass Mill Roll Shop: - Roll Grinder KWB8-4...
South Korea 
K&S K&S1488 Plus
- Manufacturer: Kulicke & Soffa
Application: Wire bonding for various devices | ▲ work plate: Multi Unit Sorting
South Korea
DS Precision Ind. Co. DEX-0401
- Manufacturer: DS Precision Ind. Co.
Application: Expanding Tape for Diced Wafer | ▲ available wafer size: 8", 6" | ▲ pressing type: Air Pressure
South Korea
