Used applicators in Groningen, Netherlands

2016 KELVION VCI-p-61407-ED

• Manufacturer: KELVION

Good Kelvion evaporator with 1 fan. Mentioned capacity at an evaporating temperature of -8°C and 8K, (Freezing: Q= 3,7 kW @ -25°C/7K).

1987 GUENTNER S-GHS 80/212

• Manufacturer: Güntner

Nice complete Guentner (blast freezer) evaporator with 12mm fin spacing, which is perfect for a freezing tunnel and equipped with 2 fans. Mentioned capacity at an evaporating temperature of -8°C and 8K. (Q= 15kW ...

1000 liter conical container Bohle MC 1000, Aisi 304

• Manufacturer: LB Bohle

remarks: Container stands loose in a 4-foot frame, Aisin 304; cone height approx. 600 mm; manhole diameter approx. 620 mm; container with smaller dents

31000 Liter tank, Aisi 304

Volume: 31.000 liter | Stand type: legs height adjustable | Quantity legs: 5 Piece | Diameter inside: 2.800 mm | Total height: 5.800 mm | Technical equipment: crane eyes | Outlet: available | Latest application:...

300 liter mobile tank, Aisi 316

remarks: Name plate missing: excess pressure most likely +3 Bar; filling pipe inside the tank (see pictures); outlet slightly different (see pictures)

1000 Liter Container, Aisi 304

remarks: Frame, Fe (galvanized); diameter of manhole approx. 415 mm (for 2 containers, the fastening screws of the manhole cover are made of Fe (galvanized; with signs of corrosion)

1000 Liter Container, Aisi 304

• Manufacturer: Gempp & Unold AG

remarks: Frame, Fe (galvanized); Diameter manhole approx. 415 mm

1000 Liter Container, Aisi 316

• Manufacturer: Stöcklin

remarks: Frame, Fe (galvanized); diameter of manhole approx. 420 m; slight differences in design (e.g. manhole cover); in 1 container the upper bottom is slightly pressed in, the other container has a dent in the...

1000 liter IBC container, Aisi 304

remarks: Frame, Fe (galvanized; partly slightly bent); slight differences in design possible; Ball valve made of brass (nickel-plated); Diameter manhole approx. 420 mm (for 1 container the manhole is slightly pre...

445 liter IBC Container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (galvanized; slight corrosion); Manhole diameter approx. 395 mm (manhole cover fastening screws not completely complete)

500 liter pressure tank, Aisi 304

• Manufacturer: Duotank

remarks: Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover)

1050 liter IBC container, Aisi 316

• Manufacturer: Waldner

remarks: Frame, Fe (galvanized); one of the containers is slightly higher (approx. 1,800 mm) due to a pipe in the manhole cover; this container also has 1 dip tube inside (see photos)

300 liter agitator tank (powder mixer), Aisi 316 with propeller agitator

remarks: Manhole diameter approx. 410 mm; Support ring and plate on the outside of the lower bottom made of Fe; Grayish protective coating on the outside

2130 liter tank, Aisi 304

remarks: 2 loose concrete saddles; 1 manhole approx. 340 x 440 mm in the front bottom; manhole seal missing; Inner length: approx. 2,160 mm; Inner width: approx. 705 mm; Interior height: approx. 1,490 mm;

1000 liter IBC tank, Aisi 304 in stainless steel frame

• Manufacturer: Blefa

remarks: Frame Aisi 304; manhole diameter approx. 400mm; occasionally there may be dents in the containers; 2 different connections are mounted at the outlet (see photos)