Used agitators in Groningen, Netherlands

25000 liter tank, Aisi 304 with lateral propeller agitator

remarks: Manhole approx. 470 x 400 mm; 1 dent in the cylinder

15000 liter insulated tank, Aisi 304 with lateral propeller agitator

• Manufacturer: Ahlborn

technical equipment: ventilation, butterfly valve, spray ball, crane eyes remarks: Manhole diameter approx. 415 mm; tank with adhesions inside; slight corrosion on the inside and outside of the tank agitator feat...

8000 liter insulated tank, Aisi 304 with lateral propeller agitator

remarks: Minor differences in the design of the two tanks (e.g. location of the outlets); Manhole diameter approx. 510 mm; a former manhole and 1 connection in the lower cylinder area were welded shut by the prev...

500 liter heat-/coolable tank, Aisi 304 with propeller agitator

Temperature control cylinder (dj): double jacket remarks: Hand hole diameter 200 mm; Foot frame, Aisi 304 with upper ring made of Fe; other external parts made of Fe (e.g. heating connections; el clamp screws of ...

7500 liter agitator tank with jet stream mixer, Aisi 304

remarks: The feet have been cut off and are delivered separately, please look closely at the photos.

890 liter heat-/coolable chemical reactor, Aisi 316 with anchor agitator

• Manufacturer: Heinrich Nowak

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 10.0 bar max. allowable working temperature (dj): 200 °C Temperature control cylinder (dj): double jacket temperature control b...

19600 Liter heat-/coolable pressure tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

temperature control bottom (dj): double jacket remarks: Probably 3 cooling rings around the cylinder; heating connections cut off; 1 former manhole in the lower cylinder area was welded shut by the previous opera...

2300 liter agitator tank, Aisi 304 with jet stream mixer

remarks: 3-legged frame, Aisi 304; outlet fitting incomplete; 3 load cells (no guarantee of functionality) are included in the scope of delivery

5850 liter heat-/coolable pressure vessel, Aisi 316 with blades agitator

• Manufacturer: Kleiser und Lösch

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 200 °C Temperature control cylinder (dj): half-coil temperature control bottom...

500 liter heat-/coolable tank, Aisi 316 with magnetic agitator

• Manufacturer: Bolz

Temperature control cylinder (dj): double jacket remarks: An internal double jacket was subsequently welded into the tank by the previous operator, which reduces the volume specified on the type plate to approx. ...

8550 liter steam-heated reactor vessel, Aisi 316 with anchor agitator

• Manufacturer: Heinrich Nowak

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 200 °C Temperature control cylinder (dj): half-coil temperature control bottom...

1200 liter pharmacy pressure tank, Aisi 316 with propeller agitator

• Manufacturer: SAV Leonhard Schliersmaier

max. allowable working temperature: 143 °C Volume: 1.200 liter | Vacuum: 1,0 bar | Max. excess pressure: 3,0 bar | Upper bottom: upper bottom removable / hinged | Stand type: legs | Quantity legs: 4 Piece | Diame...

1410 liter heat-/coolable pressure vessel, Aisi 316 with propeller agitator

• Manufacturer: Waldner

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 4.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 150 °C Temperature control ...

30000 liter insulated mixing tank made of AISI304 with propeller agitator

Volume: 30.000 liter | Lower bottom: cone shaped bottom | Stand type: legs height adjustable | Insulation: available | Insulating jacket: hermetically welded | Insulation material: stone wool | Material insulati...

300 liter heat-/coolable pressure vessel, Aisi 316 with disc agitator

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 150 °C Temperature control ...