Used agitators in cheko

Clamp-On agitator, LEE model RG-4

• Manufacturer: Lee

used Clamp-On agitator, LEE model RG-4, # 918616. 3/4 HP, 115/230 volt, 1725 RPM motor into gear reducer. 6' stainless steel shaft with (2) approx. 11" Dia. turbine props.

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

ITEM #: 01505.01 USED ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRIVE IS 1/3 HP 1725 RPM, 2...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

ITEM #: 01505.02 USED ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. 17.25" X 11" DISCHARGE. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRI...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

ITEM #: 01505.03 USED ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER CARBON STEEL CONSTRUCTION. 48" W X 46" LONG X 22" DEEP. TWO RIBBON TYPE SCREWS 20" DIAMETER X 45" LONG. 11" X 17" DISCHARGE. DRIVE IS UN...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. 17.25" X 11" DISCHARGE. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRIVE IS 1/3 HP 1725 RPM, 230/460 VOLT. REDUCER IS MORSE SN 74I-8425; RATI...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

CARBON STEEL CONSTRUCTION. 48" W X 46" LONG X 22" DEEP. TWO RIBBON TYPE SCREWS 20" DIAMETER X 45" LONG. 11" X 17" DISCHARGE. DRIVE IS UNMOUNTED, 3/4HP 1725 RPM, 208-220/440 VOLT. REDUCER IS MORSE SN 75M05009;...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRIVE IS 1/3 HP 1725 RPM, 230/460 VOLT. REDUCER IS MORSE SN 74I-8425; RATIO OF 15:1.

1 HP Mixer/Agitator with Stainless Steel Shaft

used 1 HP Mixer/Agitator with Stainless Steel Shaft. 230/460 volt, 1725 RPM. Bridge mount (4' L x 1' W) or remove and mount on flange. Stainless Steel Shaft is 3/4" diameter x 4'L with (2) prop type blades appr...

Groen DTA/3-60 60-Gallon 2/3-Jacketed Cooker/Mixer With Twin Shaft Agitators

• Manufacturer: Groen
• Model: DTA3-60

Unit is USED with visible minor surface wear and some minor scratches none affecting the functionality or the intended use of the unit. Inside of kettle is clean and free of any dried debris. Unit was removed fro...

clamp-on stainless steel mixer/variable speed agitator

Used clamp-on stainless steel mixer / variable speed agitator with digital readout. Driven by 1/2 HP, 1725 RPM, 115 Volt, single phase motor. Has a 30" lgth. shaft with collapsible agitator blades (approx. 8" i...

Mepaco Model: 170 - 4000lb Capacity Mixer-Blender w/Dual Paddle Agitators

• Manufacturer: Mepaco

Unit is USED and in very good condition. Unit shows signs of some visible minor surface wear, scratching on the outside, otherwise not affecting intended use of the unit. What you see in the picture is what is in...

Siemens B3-sv-7c Flender Gear Drive For Hwl2120n Agitator 55kw 19.948:1

• Manufacturer: Flender

“New without Factory Packaging”

Siemens B3-sv-7c Flender Gear Drive For Hwl2120n Agitator 55kw 19.948:1

• Manufacturer: Siemens

“New without Factory Packaging” Model number: B3-SV-07C | Output diameter: 120 MM | Power: 55 KW | Ratio: 19.948:1 | Model line: FLENDER | Mpn: B3-SV-07C | Shipping weight: 2178 lbs | Shipping dimensions: 65 x 45...

AGITATOR Agitator Shaft

• Manufacturer: AGITATOR

Used Stainless Steel Agitator Shaft

AGITATOR Agitator Shaft

• Manufacturer: AGITATOR

Used Stainless Steel Agitator Shaft