Used agitators in Groningen, Netherlands

CTC PAL MH 01-00B Agitator

This used CTC PAL MH 01-00B Agitator was tested and is in a good working condition.

Agitator from Eibenstock - EHR 23 / 2S 8179

• Manufacturer: Eibenstock

Compulsory mixer, agitator, mixing tool, stirrer Call recording: 1400 watts | Connection: 230 volts | Number of revolutions: 0-510 rpm | Dimensions: 600/500 / H180 mm | Mass: 15 | Internal storage: Hall 2 upstairs

Stainless steel container 7 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, with conical bottoms, with eccentric Z-stirrer from above, approx. 2.2 kW, approx. 40 rpm. Pillow plates around the cylinder and lower bottom, designed for operating press...

Stirred tank 20 m³

• Manufacturer: Sielmann

Design: Cylindrical, standing on 4 feet, height-adjustable, with conical ends. Anchor agitator centrally mounted at the top, 9.2 kW, 20 rpm. Half-pipe coil to the cylinder and lower end, 3 circuits, designed for ...

Stainless steel container 3 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, height-adjustable, with conical bases, Z-stirrer eccentric from above, 0.3/0.6 kW/14/28 rpm, heating/cooling pockets on the cylinder and lower base, designed for 4 bar ope...

Agitator from Eibenstock - EHR 23 / 2S 8178

• Manufacturer: Eibenstock

Compulsory mixer, agitator, mixing tool, stirrer Call recording: 1400 watts | Connection: 230 volts | Number of revolutions: 0-510 rpm | Dimensions: 600/500 / H180 mm | Mass: 15 | Internal storage: 240004

Stainless steel container 30 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 feet, height adjustable, with conical bottoms, Z-stirrer eccentric from above, 11 kW, 33 rpm, with bottom bearing, 2 baffles, half-pipe coil on the cylinder, pillow plates on th...

Stainless steel container 10 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, height-adjustable, with conical bases, Z-stirrer eccentric from above, 1.2/2.0 kW, 16/32 rpm, heating/cooling pockets on the cylinder and pillow plates on the lower base, ...

Stainless steel container 10 cbm

• Manufacturer: Sielmann

Operating data: 0.9 bar operating pressure Operating temperature 100 °C (Lt. Nameplate) Design: cylindrical, standing on 3 feet, height-adjustable With conical bottoms Z-stirrer eccentric from above, 1.8/2.7 kW, ...

Stainless steel container 100 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on a flat base, inside with a lower conical base and an upper conical base. Propeller agitator installed diagonally in the cylinder below. 5.0 kW, 960 rpm. Insulation around the cyli...

Stainless steel container 0.03 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator disc, 0.25 kW, 1390 rpm, outlet Ø 15 bottom center

Stainless steel container 0.1 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator propeller, 0.18/0.25 kW, 650/1390 rpm, 2 outlets DN 25

Stainless steel container 0.24 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator propeller, 0.18/0.23 kW, 650/1390 rpm, outlet 3 outlets DN 25

Stainless steel container 0.05 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator disc, 0.37 kW, 1380 rpm, outlet Ø 15 bottom center

Stainless steel container 240 cbm

• Manufacturer: Sielmann

Design: Upright cylinder with inwardly curved lower base, sloped to the outlet. With a conical upper base. Propeller agitator installed at an angle in the cylinder below, 2.7 kW, 465/970 rpm. Insulation around th...