Used agitators in Berlin, Germany

Stainless steel tank 6500 L with agitator mixing tank insulated #26040

Tank dimensions height 2.50 m, Ø 1.90 m capacity approx. 6.500 l Mixing tank stainless steel tank with agitator , tank dimensions height 2.50 m, Ø 1.90 m mixing unit 4.0 kW / 43 rpm for molasses, beverages, AHL, ...

Ex Atex stainless steel tank 10,000 L with agitator paint powder mixer mixing tank #25749

Mixer tank capacity 10.000 liters Agitator motor Explosion-proof Ex Atex Stainless steel tank with agitator Color Powder mixer Mixing tank size Ø 2.000 mm height approx. 3.000 mm original motor of the agitator Ma...

Ex Atex stainless steel tank 10,000 L with agitator paint powder mixer mixing tank #25748

Mixer tank capacity 10.000 liters year of construction 2009 without motor Atex mixer stainless steel tank 10.000 liters with agitator used. for liquids , powders , paints. Paint powder chemical products Tank capa...

Pendraulic dissolver

Dissolver, mixing unit, agitator, with mixing vessel PENDRAULIC WDV 7.5 Length ( stirrer ): 1000 mm, diameter ( stirrer ): Ø 200 mm Material ( stirrer ): Stainless steel Gearbox: STÖBER R67-0000-NK 360 - 1800 rpm...

STAMO / Getriebebau NORD DEx 160L/4K

• Manufacturer: Getriebebau-NORD

Agitator gear motor n2: 16 rpm / M2: 8923 Nm Motor: Manufacturer: HEW hollow shaft Ø 100 mm, with feather key 15 kW / 1465 rpm Ex-protected / IP 55 / 380 V Subject to changes and errors in technical data, specifi...

Trough mixer 1.5 kW stainless steel #B16692

Trough approx. 1500 x 850 x 1100 mm 1.5 kW 5.3 rpm Single-shaft mixer, trough mixer, stainless steel, used Manufacturer unknown Stainless steel Bottom is closed with a slide valve (this has yet to be manufactured...

1999 Continuous mixer 55 kW #B17062

• Manufacturer: AVA-HUEP GmbH

Continuous mixer, single-shaft mixer, trough mixer for heavy-duty mixers used ideally suited for large throughput quantities Manufacturer AVA-HUEP GmbH capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm ...

Dosing hopper Ø 1200 mm #B15008

• Manufacturer: K-TRON SODER

Dosing hopper, weighing hopper used for K-TRON screw feeder stainless steel cone diameter max approx. 1200 mm min approx. 300 mm height approx. 2700 mm volume approx. 2 m³ stirrer drive 0,55 kw

KLOSE KDR 308-20

• Manufacturer: KLOSE

Roller drive, motorized roller, feed drive, roller gear used roll width ca. 380 mm roll diameter approx. 150 mm 300 rpm torque = 2,8 kpm 500 V 50 Hz Total approx. 1250 x 350 x 350 mm The roller drives come from a...

Stainless steel paddle auger mixing auger adjustable 2.5 m #B14878

Paddle screw, mixing screw, washing screw, trough screw used Paddle screw, mixing screw, washing screw, trough screw, friction washer used trough length approx. 2500 mm trough width approx. 530 mm trough height a...

Une paddle snail #23421

combined trough/tubular auger with paddle and threaded part and sight flaps , unused total length 5800 mm trough length with paddles 4000 mm trough width (inside) 430 mm pipe length with thread on outlet side 100...

Unknown S500

• Manufacturer: Unknown

simple screw feeder, dosing hopper, weighing hopper used K-TRON SODER 7 rpm 0,75 kW hopper cone diameter max approx. 1200 mm min approx. 350 mm stainless steel volume approx. 2 m³ height approx. 2700 mm stirrer d...

2001 T-s-i.de Misch-und Dosiertechnik GmbH Mastermix

• Manufacturer: T-s-i.de Misch-und Dosiertechnik GmbH

2-component mixing and dosing system, drum emptying system container drum emptying emptying system glue glue press pump used Container sizes Ø 600 x 900 mm and Ø 300 x 500 mm Boom length approx. 3800 mm Pneumatic...

Paddle mixer stainless steel approx. 2800 mm #B17253

Mixer stainless steel, mixing auger, auger mixer, paddle mixer used Inlet approx. 700 x 320 mm stainless steel A motor can be retrofitted by us according to your requirements.