Used Machine Tools in Bavaria, Germany

1981 Swivel bending machine RAS 64.25
- Manufacturer: RAS
Used RAS motor-driven bending machine, with foot switch, simple control up to 6 bending angles, adjustable potentiometer, manual bending jaw lowering. The machine will be professionally repaired, inspected, and...
Hohenbrunn, Germany
Trusted Seller
Banding machine, pallet labeling
- Manufacturer: AETNA Group
Additional title: Roboband / Logomatic | Capacity: 150 paletts / h | Power: 5,5 kW | Current: 10 A | Voltage: 400 Volt | Frequency: 50 Hz | Weight: 1700 kg
Freising, Germany
2021 Schechtl MAF 400 swivel bending machine
- Manufacturer: Schechtl
Used Schechtl swing bending machine with the following equipment: - 1 sharp guide bar 20°, offset, 1 mm radius for the upper beam - 1 insert rail each 10/100 mm and 24/100 mm for the bending beam - 2 foot switc...
Hohenbrunn, Germany
Auction
GILDEMEISTER CTX 410 CNC Lathe
- Manufacturer: Gildemeister
- Spindle bore: 65 millimeter
Machine CTX 410 V4 Control Heidenhain Plus IT Travel Spindle Turning diameter over facing slide: 375 mm Revolver
Wallerstein, Germany
Visit Auction Website
Trusted Seller
Lathe (MP00004) Elmag Industrie 1000/230 HD
- Manufacturer: Elmag
SN: 1770330, center width approx. 1,000 mm, center height 230 mm, control, Elmag, cross support, tailstock, continuous spindle, workplace light, turning Ø max. 460 mm, spindle clearance 80 mm, accessories: lynche...
Gauting, Germany
1995 Dräco K9 double standing seam machine
- Manufacturer: Dräco
Used Dräco K9 double standing seam machine for closing angle and double folds, includes 1 set of cutting rollers for fold removal, including folding rollers. The machine is currently converted to cutting operati...
Hohenbrunn, Germany
2010 Schechtl MAB 310 CNC swivel bending machine
- Manufacturer: Schechtl
- Model: MAB 310
Used Schechtl MAB 310/CNC folding machine Well-maintained condition, with front rail, two upper jaw rails, and motorized backgauge A new control unit is currently being installed. The machine will be profession...
Hohenbrunn, Germany
Fasti 125-10/1.5 round bending machine
- Manufacturer: Fasti
Used Fasti rotary table saw, motorized, foot-operated, manual rear angle feed, emergency stop cord, very good condition The machine will be professionally repaired, inspected, and cleaned, and will then be full...
Hohenbrunn, Germany
Trusted Seller
Auction
AMADA HFE 3i 1003L CNC Press Brake
- Manufacturer: Amada
- Model: HFE-3I 1003
Model: Amada HFE 3i 1003L – CNC Press Brake • Year of construction: 2017 • Operating hours: 3652 h • Control system: Amada AMNC 3i touch control Equipment: • Original tools included • Safety light curtain (Fiessl...
Tuntenhausen, Germany
Visit Auction Website
Auction
MORI SEIKI NL 2500 CNC Lathe
- Manufacturer: Kitagawa
- Spindle bore: 91 millimeter
Travel Z-axis 795 mm Y-axis travel 100 mm Turning diameter over transverse valve: 742 mm Turret Number of tool positions: 12 Main spindle Max. spindle speed rpm: 4,000 Condition Good and fully functional
Wallerstein, Germany
Visit Auction Website
1992 Ozamech KM 3000-2.5 swivel bending machine
- Manufacturer: Ozamech
Used Ozamech folding machine, easy program angle setting on the side stand, with foot switch, removable extension rail, upper jaw rail approx. 30 degrees Machine is unrepaired, in its current condition
Hohenbrunn, Germany
1991 Jorns SuperLine-300-SO-CNC-6 long bending machine
- Manufacturer: Jorns
Well-maintained and robust hydraulic bending machine with foot pedal, retractable sheet supports, hydraulic radius adjustment, and automatic sheet thickness adjustment programmable via CNC control, with detachabl...
Hohenbrunn, Germany
2006 Long bending machine Biegemaster BS 4.2.0
- Manufacturer: Biegemaster
- Power requirement: 5.5 kilowatt
Used hydraulic bending machine with CNC touchscreen graphic control, Hydraulic material thickness adjustment, manual upper jaw preload, Motorized depth stop + conical stop, motorized roller shear. The machine w...
Hohenbrunn, Germany
2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kilowatt
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany
2009 ERMAK HGS-A guillotine shears
- Manufacturer: Ermak
- Model: HGS-A
- Maximum thickness: 6 millimeter
- Power requirement: 11 kilowatt
Used Ermak hydraulic guillotine shear, folding backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, and 14 hold-downs. The machine will be professionally repaired, inspected, and cleane...
Hohenbrunn, Germany