Used Fish Processing in Spain

ROSSI & CATELLI S/S ROLLER SKINNER

• Manufacturer: ROSSI & CATELLI

WORKING DIMENSIONS: Roller width: 72 cm Diameter roller: 2.5 cm Included: - Screw for skin waste removal.

S/S DAPONTE SARDINE HEADING ANG GUTTING MACHINES

• Manufacturer: DAPONTE

Machine designed to carry out the heading and gutting of sardines. Equipped with: Tank (integrated in the machine) Mould dimensions: Mould length: 12 cm Head length: 3 cm Width: 4.5 cm

STAINLESS STEEL EVISCERATOR

Height: 2.25 m | Included: EMERGENCY BUTTON | Useful width: 0.05 m | Length: 5.00 m | Weight: 0 Kg | Made of: STAINLESS STEEL | Control pannel: INCLUDED | Frequency: 50 Hz | Voltage: 400 V

HERMASA TUNIPACK-500

• Manufacturer: HERMASA

High production machine speed of 500 cans / minute. -Made of stainless steel AISI-304 and AISI-316. -Touch screen control for changing operating parameters (speed, weight, packaging, etc ....). -Packing Weight ch...

S/S MACONSA LINEAR BRUSH WASHING MACHINE

• Manufacturer: MACONSA

DESIGNED TO BRUSH THE MUSSEL SHELL TO REMOVE ALL TYPES OF MARINE DEBRIS OR FOULING.

HERMANOS ALFARO P.H.A HIDRA

• Manufacturer: HERMANOS ALFARO

Height: 0.35 m | Included: 0.50 m | Useful width: 0.00 m | Length: 0.60 m | Weight: 0 Kg | Made of: STAINLESS STEEL | Aisi: 316 | Rpm: 100 | Motor: HYDRAULIC | H.a. hidra peeling machine: Hydraulic motorised mac...

LEIJON TUNA SKINNER

• Manufacturer: LEIJON

Height: 2.10 m | Included: TOUCH SCREEN | Useful width: 0.27 m | Length: 7.57 m | Weight: 1800 Kg | Made of: STAINLESS STEEL | Control pannel: INCLUDED

FMC 166

• Manufacturer: FMC

Height: 2.20 m | Included: 2.00 m | Useful width: 0.00 m | Length: 3.80 m | Weight: 0 Kg | Production: 100 CONTAINERS/MIN | Volt: 380 V | Power: 4 KW, 5.4 CV | Current format (mm): 99 | Frequency: 50 HZ

STRIP CUTTER FOR PEPPER, SPINACH, CEPHALOPODS

Industrial slicers allow different types of food to be cut with impressive precision and speed, which in turn reduces preparation time and increases productivity. Equipment designed for cutting cephalopods (squid...

S/S WASHING MACHINE FOR REMOVING SOIL FROM COCKLES

- The production is of entrance. - Inner spindle pitch: 330 MM - It has 4 intermediate pitches + the final output pitch.

ANCHOVY SCALDING LINE (WITH 3 POOLS)

Height: 2.00 m | Included: 3 POOLS | Useful width: 0.00 m | Length: 5.50 m | Weight: 0 Kg | Made of: STAINLESS STEEL | Recirculation pump: 3 UNITS

GRUPO HRG BT 2203

• Manufacturer: Grupo HRG

In the vacuum conveying system, the treatment tanks are emptied through as many vacuum tanks as there are discharge points. These vacuum tanks are filled with product (e.g. cephalopods) by the vacuum created by t...

GRUPO HRG CP 3300

• Manufacturer: Grupo HRG

The slicing machine is a machine designed for slicing the tentacles of cephalopods. The machine is equipped with: - An upper conveyor belt of slats, on which the product to be sliced is transported. - It has a se...

PELAGIC DEHEADER

• Manufacturer: VMK

This heading machine consists of an automatic feeder that guides the fish head first through vibrating hoppers. The fish continue in a steady flow through the four feeding sections to the heading section. The hea...

VARLET TUNA SKINNER

• Manufacturer: VARLET

Open and universally applicable fish skinning machine for many species of fish: fish fillets, flat fish, cephalopods, etc. The peeler has a working speed of 29 m/mm (48 cm/s) and approximately 30 pieces per minut...