Textile and leather manufacturing » Calendering

Building Filters

234

Used rollers

  • Kobe 2-Roll Rubber Calender

    Kobe 2-Roll Rubber Calender

    • Manufacturer: Kobe

    One (1) Used Kobe 21” x 36” (533 x 914) 2-Roll Horizontal Calender, BODY ONLY, friction ratio between rolls 1.04:1 via 26/27 tooth connecting gears, roller bearings, no base, year 1980, S/N 790031 & 790032

    Cleveland, OH
  • Farrel 24x68 "S" Calender

    Farrel 24x68 "S" Calender

    • Manufacturer: Farrel

    One (1) Used Adamson 24” x 68” (610 x 1725) 4-Roll “S” Rubber Calander, drilled rolls, roller bearing, individually driven rolls, crossing on rolls 1&4, motorized nip adjustment, forced lubrication, cast frames, ...

    Cleveland, OH
  • Akron Steel Fabricators ASF Calender

    Akron Steel Fabricators ASF Calender 24 x 68 2-Roll

    • Manufacturer: Akron Steel Fabricators

    One (1) Used Akron Steel Fabricators 24x68" 2-Roll Calender, Vickers individual hydraulic drives for top and middle drilled rolls, individual Lincoln 100 HP 460 VAC for each roll (total 200 HP), anti-friction rol...

    Cleveland, OH
  • Trusted Seller
    2000 x 6 3-roller calender

    2000 x 6 3-roller calender

    • Manufacturer: Calandra a 3 rulli da 2000 X 6

    1 UPPER ROLLER DIAM.170 2 LOWER ROLLERS DIAM.155 MANUAL OPENING, VALID ELECTRIC PANEL MEASURES 3000X800XH1300, WEIGHT 20Q. APPROXIMATE DATA WORKING

    Lombardy, Italy
  • Trusted Seller
    BELGIUS calender with 60 mm

    BELGIUS calender with 60 mm rollers product code: 26430

      Hurry up! This product has already been viewed 3497 times! Don't miss it! Press brake with 60 mm rollers Maximum thickness 1 mm Roller diameter 60 mm Machine book not in possession LATHE MACHINE FOR SH...

      Mogliano Veneto, Italy
    • Trusted Seller
      BETA Calender - Year 2014,

      BETA Calender - Year 2014, roller width 2100 mm, 3 rolls

      • Manufacturer: Beta

      BETA CALENDER year 2014, roller width 2100 mm, 3 bowls ( cotton-steel-racolan), pressure 63Ton, oil heating including his oil boiler heating device system incorporate, entry with metal detector, sewing detector,...

      Italy
    • Trusted Seller
      Ramisch Kleinewefers - 2 bowl

      Ramisch Kleinewefers - 2 bowl NIPCO calander for fabric densifying (for coating applications, etc.)

      • Manufacturer: Ramisch - Kleinewefers

      Location: Millfloor Type 113.10.200, year 1994 With Escher-Wyss NIPCO roller, type TFD 500 PA 3000. 2 cooling rollers on exit side (water cooled) steam heated (boiler not included) exit with A-frame batching arm ...

      Enschede, Netherlands
    • 2009 Three Roll Calender Berstorff

      2009 Three Roll Calender Berstorff 2650mm wide x 650mm diameter – Year 2009

      • Manufacturer: Krauss Maffei Berstorff

      *** SOLD *** Enquire for similar machines Berstorff Three Roll Calender 2650mm wide x 650mm (26”) diam. Effective working width 2600mm (Roller Head Die Width) Complete with motor and controls.

      Borehamwood, United Kingdom
    • Trusted Seller
      STANKOIMPORT NB 2220 Y4 2000×6

      STANKOIMPORT NB 2220 Y4 2000×6 mm

      • Manufacturer: Stankoimport

      Typology: CALANDER WITH INVITATION | Natricola: NB 2220 Y4 | Maximum calendering length: 2000 mm | Maximum sheet thickness 40 kg / mm²: 6 mm | Upper roller lift with push coupling: 200 mm | N.1 upper idle roller...

      Nichelino, Italy
    • 1963 Troester KA 5183 #1077-03542

      1963 Troester KA 5183 #1077-03542

      • Manufacturer: Troester

      small roll gap 0,1 mm max roll gap 47 mm Speed front/rear roll 5-30 rpm Speed front/rear roll 3,2-19,1 m/min Description of the machine: ? Rollers individually driven ? Friction variable ? Manual gap adjustment ?...

      Dorsten, Germany
    • Trusted Seller
      1980 INCAR-DUCCI A1-320-M

      1980 INCAR-DUCCI A1-320-M

      • Manufacturer: INCAR-DUCCI

      Typology: CALANDER WITH INVITATION | Weight: 3500 kg | Maximum calendering length: 2050 mm | Maximum sheet thickness 40 kg / mm²: 6 mm | N.1 upper idle roller: Ø 160 mm | N. 2 independent lower rollers: Ø 150 x ...

      Nichelino, Italy
    • Trusted Seller
      DIMECO calender 600 x 3

      DIMECO calender 600 x 3 mm.

      • Manufacturer: Dimeco

      Sheet passage width: 600 mm. | Max thickness tape: 0.5-3mm | Diameter of the rollers: 60 mm. | Number of rolls: number 11 | Number of traction rollers: no. 2+2

      Borgone Susa, Italy
    • Trusted Seller
      JOINT calender 1.250 x 3

      JOINT calender 1.250 x 3 mm.

      • Manufacturer: Joint

      Sheet passage width: 1,250 mm. | Max thickness tape: 0.5 - 3mm | Diameter of the rollers: 90 mm | Number of rolls: no. 9 | Number of traction rollers: no. 2 | Introduction ramps: Plumbing present

      Borgone Susa, Italy
    • Used FACCIN 2100x28mm calender

      Used FACCIN 2100x28mm calender

      • Manufacturer: Faccin-Biko

      Used FACCIN 4HEL Plate Bending Machine – Power, Precision, and Accessories for Maximum Efficiency The FACCIN 4HCI plate bending machine is a high-performance, 4-roller machine designed for bending sheet metal up ...

      Villafranca di Verona, Italy
    • Trusted Seller
      2006 MONTI ANTONIO 901

      2006 MONTI ANTONIO 901

      • Manufacturer: Monti

      Ref.638 MONTI ANTONIO felt calender for transfer printing year 2006 Ref.638 MONTI ANTONIO felt calender for transfer printing year 2006 2000 Electrically heated cylinder Ref.638 MONTI ANTONIO felt calender for tr...

      Prato, Italy
    12345

    Overview

    Calendering machines are used in various industries to smooth, coat, or finish materials like textiles, paper, and plastics. These machines consist of multiple rollers that apply pressure and heat to the material, enhancing its properties and surface quality. Calendering is essential for producing high-quality, uniform products in sectors like printing, packaging, and manufacturing.

    FAQ

    What should I consider when buying a used calendering machine?

    Consider the machine's age, condition, and maintenance history. Check for any signs of wear on the rollers and inspect the heating and pressure systems. Ensure it meets your production requirements.

    How do I ensure the calendering machine is shipped safely to my location?

    Use a specialized transport service for heavy machinery. Properly secure the machine and protect sensitive components to prevent damage during transit.

    What is the maintenance schedule for a calendering machine?

    Regular maintenance includes inspecting rollers, checking and replacing heating elements, and ensuring pressure systems are functioning correctly. Follow the manufacturer's manual for specific maintenance intervals and procedures.