Used Processing in Bremen, Germany

1020 liter pressure tank, Aisi 304

max. allowable working temperature: 50 °C Technical documentation: German Technical Supervisory Association TÜV documents,various documents remarks: Tank lies loosely in a frame, Aisi 304; 1 manhole approx. 320 x...

3000 liter pressure tank, Aisi 304

• Manufacturer: Edel

remarks: Manhole diamter approx. 300 x 395 mm (manhole cover missing)

1200 liter tank, Aisi 304

• Manufacturer: Schwarz

remarks: Tank 1: smaller dents in the lower bottom, manhole diameter approx. 430 mm (loose manhole cover), total height lower (approx. 1,450 mm); Tank 2: manhole diameter approx. 500 mm; tank with stronger dents;...

32000 liter heat-/coolable pressure tank, Aisi 316

• Manufacturer: A&C Kosik

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 6.0 bar temperature control bottom (dj): half-coil notice: some residues of previous content, manhole cover plated remarks: Man...

1000 Liter IBC Container, Aisi 304

• Manufacturer: Thyssen Umformtechnik

Volume: 1.000 liter | Stand type: cage | Total height: 1.650 mm | Total width: 1.230 mm | Total length: 1.030 mm | Manhole: in the upper bottom (Ø 400) | Technical equipment: ball valve | Outlet: DN50 DIN 11851 ...

1000 Liter IBC Container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (galvanized); 1 additional manhole cover with built-in Liquifant; small dents in the upper bottom (see photos)

4500 liter coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket with trickle ring - only suitable for pressureless cooling; a rectangular sheet was cut out o...

445 liter IBC Container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (galvanized; slight corrosion); Manhole diameter approx. 395 mm (manhole cover fastening screws not completely complete)

500 liter pressure tank, Aisi 304

• Manufacturer: Duotank

remarks: Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover)

6350 liter heat-/ coolable tank, Aisi 304

• Manufacturer: Becker Tanks

remarks: Thermoplate for heating/cooling on one of the two side walls (not on the other side wall); 1 manhole approx. 340 x 440 mm in the front bottom; small dents in the upper bottom; various fittings inside the...

8750 liter coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

• Manufacturer: G + R W. Ortmann GmbH & Co. KG

remarks: 2 cooling plates each inside the tanks; 1 manhole approx. 300 x 400 mm in the front bottom; feet fitted with loose, height-adjustable screws (possibly no longer available for all feet; screws were not in...

6000 liter horizontal +8 bar pressure tank, Aisi 304

• Manufacturer: W. Ortmann

remarks: 1 oval manhole (approx. 420 x 320mm) in the front floor; information in the drawing on cylinder length not correct; various loose fittings in the tanks (were not taken into account when specifying the ta...

3000 liter heat-coolable agitator tank, Aisi 316 with jet stream mixer

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Tank lid, 1.4301 (Aisi 304); 1 cut connection in the lid (see photos) agitator features: Jet stream mixer, ...

Plate heat exchanger, stainless steel

• Manufacturer: ALFA-LAVAL

Other: - Volume: 213 Liter- Design pressure: 10 bar- Design temperature: 110° C- Test pressure: 14,3 bar

1050 liter IBC container, Aisi 316

• Manufacturer: Waldner

remarks: Frame, Fe (galvanized); one of the containers is slightly higher (approx. 1,800 mm) due to a pipe in the manhole cover; this container also has 1 dip tube inside (see photos)