Processing » Agitators, Blenders, Mixers » Agitators » Japan

Search By Manufacturer

Search By Prefecture

Building Filters

59

Used Agitators in Japan

  • SUS tank with agitator

    SUS tank with agitator

      250L φ710×H640(Body)×H750(Leg) Remarks: Ancillary product for 6931 Pressure Cake Mixer

      Hiroshima, Japan
    • ［Satake] Agitator Model No

      ［Satake] Agitator Model No

      • Manufacturer: Satake

      Shaft and blade material: SUS. Three propellers x 1. Rotation speed: 360 rpm. Base with casters/manual elevation type.

      Hiroshima, Japan
    • ［Ikeda Rika] V type mixer

      ［Ikeda Rika] V type mixer No model

      • Manufacturer: Ikeda

      Capacity: about 10L With agitator Power: 0.2kw/100V | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: One

      Hiroshima, Japan
    • Aikosha ACM

      Aikosha ACM

      • Manufacturer: Aikusho

      Agitator: spiral hook with control panel Material: Wetted part SUS | Quantity saved: One

      Hiroshima, Japan
    • 2005 Buhler SHP · TS

      2005 Buhler SHP · TS · 40

      • Manufacturer: Bühler

      Wetted parts material: SUS Hydraulic drive motor Agitator: High-speed turbine, low-speed 3 open propellers Explosion-proof hydraulic unit

      Hiroshima, Japan
    • SUS tank

      SUS tank

        Total capacity: approx. 3000L. *Some accurate capacity requires actual size measurement due to lack of data. Equipped with an agitator (eG3).

        Hiroshima, Japan
      • 2008 Inoue BDM-50

        2008 Inoue BDM-50

        • Manufacturer: Inoue Manufactory

        Agitator: High-speed turbine 2.2kw/variable speed Low-speed butterfly 1.5kw/ variable speed Hydraulic unit: 1.5kw Oil rotary vacuum pump: 0.75kw 2 tanks, 1 control panel

        Hiroshima, Japan
      • 3500L Cylindrical vertical type

        3500L Cylindrical vertical type

          Agitator: 5.5kw (Cyclo Decelerator) Jacket：SUS304 Drawing available

          Hiroshima, Japan
        • SUS tank with coil

          SUS tank with coil

            Capacity: approx. 10 m3 With agitator (missing due to diversion of drive unit) Only near the bottom of the coil With heat insulator (with dents, etc.)

            Hiroshima, Japan
          • 1990 Iwai Machinery Industry Cylindrical

            1990 Iwai Machinery Industry Cylindrical vertical type

            • Manufacturer: Iwai Machinery Industry

            Type 2 pressure vessel Jacketed and agitated (0.4 kW) Shower ball Bottomless

            Hiroshima, Japan
          • Shimazaki Works Cylindrical Vertical

            Shimazaki Works Cylindrical Vertical

            • Manufacturer: Shimazaki Seisakusho

            For medium viscosity (7000CP) 11kw cheaper 3-stage blades, filling volume: 1200L, Jacket: Yes Agitator: 11kw, low cost Shape: Bottom dish mirror Previous experience: Used in adhesive manufacturing process

            Hiroshima, Japan
          • Hitachi, Ltd. Cylindrical vertical type

            Hitachi, Ltd. Cylindrical vertical type

            • Manufacturer: Hitachi

            Wetted part material: SUS Flat top and bottom SUS spiral cored Jacket: Coil (transmission surface 5m2) Agitator: 1.5kw Shape: Upper and lower flat

            Hiroshima, Japan
          • 1984 Iwai machine cylinder vertical

            1984 Iwai machine cylinder vertical type

            • Manufacturer: Iwai Machinery

            Jacket / stirrer (2.2 kW, 3 propeller blades) ※ Satake Multi Mixer (360 rpm) Closed type, with shower ball / manhole

            Hiroshima, Japan
          • 350 L Cylinder vertical type

            350 L Cylinder vertical type

              Jacket (for hot and cold water, not steam) Homo mixer (3.7 kw)

              Hiroshima, Japan
            • SUS tank

              SUS tank

                Total capacity: approx. 2000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.

                Hiroshima, Japan
              1234

              Overview

              Agitators are essential devices used to stir or mix fluids in various industrial processes. They are commonly found in industries such as chemical, food and beverage, pharmaceuticals, and wastewater treatment. Agitators ensure uniform mixing, improve chemical reactions, and maintain product consistency. They come in different types, including top-entry, side-entry, and bottom-entry agitators, each suited for specific applications.

              FAQ

              What factors should I consider when purchasing an agitator?

              Consider the type of fluid, the viscosity, the required mixing intensity, and the specific application. It's also important to assess the agitator's material compatibility with the fluids being mixed.

              How can I ensure the agitator is shipped safely?

              Choose a shipping provider experienced in handling industrial equipment. Ensure the agitator is properly packaged and secured to prevent any damage during transit.

              What is the typical maintenance schedule for an agitator?

              Regular maintenance includes inspecting seals and bearings, checking for wear or damage, and ensuring that all moving parts are lubricated. Follow the manufacturer’s guidelines for detailed maintenance procedures.