1991 Binder dosing / binder injection
- Manufacturer: Webac
RS 125/700 screw conveyor, steel support structure, binder scale, pneumatic pressure vessel conveyor, capacity 36 l, operating overpressure 4 bar, operating temperature 50 °C
Meinerzhagen, Germany2017 MICHENFELDER Electrical Engineering MICOMP 5 Type G-CH
- Manufacturer: Michenfelder Elektrotechnik
Process control and evaluation unit, sheet steel housing with viewing window, pre-moisture measurement (used sand feed belt), rod electrode with temperature sensor, electrode holder, moisture measuring probe type...
Meinerzhagen, Germany
1993 KLEIN D 500
- Manufacturer: Klein
Charge 50 kg, sand temperature increase approx. 1°C/s to max.30°C, 24 kW
Meinerzhagen, Germany
Additive/binder scale
- Manufacturer: DATEC
Stainless steel hopper, load cell with digital display, pneumatic rotary flap
Meinerzhagen, Germany
Festo valve manifold MPA-S with multipole connection / 32E-MPA 32P-SGL-R-MBAU-JL3JL
- Manufacturer: Festo
Unused stock item Valve terminal MPA-S with multi-pin plug connection 32E-MPA / 32P-SGL-R-MBAU-JL3JL Valve terminal, electrical part 32E MPA valve terminal with multi-pin plug connection Electrical control MPM mu...
Freiberg, Germany- Trusted Seller

2008 Because of EP 150/2Fl.
- Manufacturer: Roweflex
ROWEFLEX two-way diverter valve used ATEX stainless steel silo filler silo filler two-way diverter valve with pneumatic swivel drive. Pipe diverter valve to distribute product flows. P= max. 10 bar / min. 2 bar ;...
Riesa, Germany 
2016 Reißaus & Baumberg CM 4-8 x 5640
- Manufacturer: Reißaus & Baumberg
Double-jointed design, vertical, sand dosing slide, additive dosing pumps/valves, flow monitoring, mixing capacity 4-8 t/h, throat depth 4.0 + 1.64 m, discharge height approx. 1,763 mm, connected load 14 kW, swiv...
Meinerzhagen, Germany
2007 WÖHR DWM WDS 8-25 to
- Manufacturer: Wöhr
Double-joint design, vertical, sand hopper / dosing slide, additive dosing pumps / valves, flow meters, mixing capacity 8-25 t/h, throat depth 5.5 + 2.0 m, discharge height approx. 2300 mm, connected load 19 kW, ...
Meinerzhagen, Germany1978 AXMANN TURBOMIX TMV 5 B
- Manufacturer: Axmann
Single-joint design, upright, capacity approx. 5 t/h, throat depth approx. 2.5 m, premixer 1.5 kW, high-speed turbo mixer 5.5 kW, additive metering pumps, connected load 8.5 kW, control system
Meinerzhagen, Germany
1987 AXMANN TURBOMIX TME 2
- Manufacturer: Axmann
Rigid single-arm design, stationary (upright), sand bunker, sand dosing slide, additive dosing pump and valves, mixing capacity 2 t/h, throat depth 1.0 m, drive power 4.0 kW, connected loads 380 V, 50 Hz, control...
Meinerzhagen, Germany1999 F.T.L. - Foundry & Technical Liaison Ltd. Model CM 013-5
- Manufacturer: F.T.L. - Foundry & Technical Liaison Ltd.
Single-joint design, stationary (upright/hanging), without column, sand dosing slide, dosing pumps and valves, mixing capacity 5 t/h, projection 1.5 m, drive power 4.0 kW, connected loads 380 V, 50 Hz, control unit
Meinerzhagen, Germany1977 GISAG ASTE 6,3
- Manufacturer: Gisag
Capacity approx. 6-8 m³/h, feed hopper, smooth rubber belt, beater bar rotor, adjustable discharge cover, drive motor 5.2 kW
Meinerzhagen, GermanyChrome ore sand separation plant
- Manufacturer: Klein
Sand hopper, vibrating dosing chute, two-stage chromite separation (air/permanent magnetic roller), radial blower fan, control system
Meinerzhagen, Germany1984 PAULUS HP 4011/1
- Manufacturer: Paulus
Capacity approx. 6 m³/h, drive 11 kW, inlet chute, centrifugal disk, baffle ring
Meinerzhagen, Germany
1985 UHDE/KÜTTNER DWF 2100 x 5600 / SM 71/6
- Manufacturer: Küttner
Vibrating conveyor trough with air-permeable floor, dimensions (LxW) 5,600 x 2,100 mm, 2 unbalanced vibration motors 2x 3.5 kW, stationary exhaust air/cooling hood, water spray device, fan, drive power 18.5 kW, c...
Meinerzhagen, Germany
Beloit DD3600 Papermaking
- Manufacturer: Beloit
- Model: DD3600
Good condition Beloit DD3600 Papermakings. Located in Germany and other countries. Click request price for more information.
Germany

