- Trusted Seller
SLAP PH 211-1 CCS
- Manufacturer: MEP
- Model: PH 211
Description New band saw from MEP Type PH 211-1 CCS Semi-automatic Available from stock
Drachten, Netherlands - Trusted Seller
2017 Imet Sirio 370 SH-E
- Manufacturer: Imet
- Model: SIRIO 370 SH-E
Description Young used IMET circular saw with push-up system from PEHU Type Sirio 370 SH-E Pushing system PEHU Autopos 600L Equipped with microdose lubrication system Capacity ø 120 mm / rectangle 180x100mm / squ...
Drachten, Netherlands - Trusted Seller
2014 MACC NTS 315
- Manufacturer: Macc
- Model: NTS 315
Description Used MACC circular saw 315mm saw blade Pneumatic clamp Double miter
Drachten, Netherlands - Trusted Seller
Zimmer Z241/R
- Manufacturer: Zimmer
- Model: Z241/R
Description New band saw from Zimmer Type Z241/R Hydraulic saw feeding system Single sided mitre 0 - 60 degrees Cutting speed continuously 30 - 70 meters / min Clamping opening max 240mm
Drachten, Netherlands - Trusted Seller
MEP PH 262 CCS
- Manufacturer: MEP
- Model: PH 262
Description New band saw from MEP Type PH 262 CCS Semi-automatic Available from stock
Drachten, Netherlands 
Panhans Band Saw
- Manufacturer: Panhans
Machine specifications: – Wheel diameter 400 mm – Upper and lower guides – Limit switches on the doors
$1,113 USDSneek, Netherlands
Centauro Band Saw 600 CL
- Manufacturer: Centauro
Machine technical data: - Wheel diameter 600 mm - Motor power unknown - Upper and lower guide - Limit switches on the doors
Sneek, Netherlands
Circular saw Harwi type 130 (20250925)
- Manufacturer: Harwi
$2,051 USDSneek, Netherlands
Circular saw Harwi type 130 with table extension (20250925)
- Manufacturer: Harwi
Specifications: 30 mm saw blade bore 45-degree angle adjustment 5.5 kW (7.5 hp) motor power incl. motor brake 400-volt voltage
Sneek, Netherlands
2008 Tecnomax Band Saw S 600 P
Technical data machine: - Wheel diameter 600 mm - Engine power 2.2 kW - Built in 2008 - Upper and lower guides - Limit switches on the doors
Sneek, Netherlands
2002 Fritz Gross UCM 425
- Manufacturer: Fritz Gross
Sawcapacity: 145 mm round 120 mm square Autom. length stop: MPS, type 4010 8 meter long Featured with: - Half automatic - Hydraulic clamping - Variabele sawing feed
Lemmer, Netherlands
2002 Kaltenbach KB 360 G
- Manufacturer: Kaltenbach
- Model: KB 360 G
Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm Sawbelt dimens...
Lemmer, Netherlands
2020 Bemak BMSY 320 DG
- Manufacturer: Bemak
Sawcapacity at 90 degree: Round: Ø320 mm Rectangular: 450 x 320 mm Square: 320 x 320 mm Sawcapacity at 45 degree: Round: Ø320 mm Rectangular: 330 x 320 mm Square: 320 x 320 mm Sawcapacity at 30 degree: Round: Ø32...
Lemmer, Netherlands
Delfstrahuizen, Netherlands
Robland format saw machine Z 400 M DEMO machine
- Manufacturer: Robland
Brochure Z 400M ***** Brochure Panel saws / Format saws Robland Standard equipment: - Anodised saw carriage 3200 mm - Max. Saw blade diameter 400 mm (not included) When using a pre-trimmer (not included) the maxi...
Sneek, Netherlands
Tip: Enter manufacturer, model or keyword