Processing » Centrifugal Separators » Disc Separators » Denmark

Search By Manufacturer

Building Filters

51

Used Disc Separators in Denmark

  • GEA Westfalia SA 100-33-177 centrifuge

    GEA Westfalia SA 100-33-177 centrifuge parts

    • Manufacturer: GEA
    • Model: SA

    We have Westfalia separator, type SA 100-33-177 parts available. Disc stack + distributor is not available. Bowl is damaged due to too much wear in the sludge ports. Motor: 55 kW, 2940 rpm, 47 Amp., 50 Hz, 380 V...

    Hirtshals, Denmark
  • 1997 Alfa-Laval WSPX403 separator

    1997 Alfa-Laval WSPX403 separator

    • Manufacturer: Alfa-Laval
    • Model: WSPX

    Reconditioned WSPX403 separator - configurated as an concentrator - and normally used for removal of solids particles and tramp oils from wash water. This unit has a 2,2 kW motor - 380 Volt, 50 Hz, 3 phase. The...

    Hirtshals, Denmark
  • Alfa Laval MAPX309BGT-14 separator

    Alfa Laval MAPX309BGT-14 separator

    • Manufacturer: Alfa-Laval
    • Model: MAPX

    Completely reconditioned Alfa Laval fuel oil separator. Motor: 11 kW, 50 Hz, 380 V. Capacity up to 7.000 l/hour. Capacity is depending on feed flow, amount of water in the feed, sludge content and oil viscosity ...

    Hirtshals, Denmark
  • Westfalia pilot plant separator, type

    Westfalia pilot plant separator, type SA 1-02-575

    • Manufacturer: GEA
    • Model: SA

    This Westfalia pilot plant separator is reconditioned and in excellent condition. The separator comes with set of tools, separator manual and starter box. The separator is configurated to operate as a purifier - ...

    Hirtshals, Denmark
  • 1995 Alfa Laval MMPX303 separation

    1995 Alfa Laval MMPX303 separation module

    • Manufacturer: Alfa-Laval
    • Model: MMPX-303

    Completely reconditioned Alfa Laval MMPX303 separation system including system manual in English.

    Hirtshals, Denmark
  • Alfa Laval WSPX 403TGP-61G separator

    Alfa Laval WSPX 403TGP-61G separator

    • Manufacturer: Alfa-Laval
    • Model: WSPX

    Alfa Laval separator, type WSPX403TGP-61G-50 Complete WSPX403 separator - normally used for removal of solid particles and tramp oils from wash water. This unit has a 2,2 kW motor - 380 Volt, 50 Hz, 3 phase. Th...

    Hirtshals, Denmark
  • Alfa Laval MMPX304 module, complete

    Alfa Laval MMPX304 module, complete separation system.

    • Manufacturer: Alfa-Laval
    • Model: MMPX

    Capacity up to 2.000 l/hour. Complete separation system for cleaning of mineral oils, including set of tools and manual/technical documentation.

    Hirtshals, Denmark
  • Alfa Laval MMPX303 module, complete

    Alfa Laval MMPX303 module, complete separation system.

    • Manufacturer: Alfa-Laval
    • Model: MMPX-303

    This complete Alfa Laval MMPX303 separation system will be reconditioned at order. We need 12 weeks delivery time. Capacity up to 1.500 l/hour. Including set of tools, manual and technical documentation.

    Hirtshals, Denmark
  • Alfa Laval BRPX 417XGV-71C-50 Separator

    Alfa Laval BRPX 417XGV-71C-50 Separator

    • Manufacturer: Alfa-Laval
    • Model: BRPX

    Alfa Laval BRPX 417 XGV-71C-50 - 3-phase separator - in concentrator configuration. Capacity: up to 26.000 liter per hour. Including separator feets, flow process valve with flow meter, set of tools and manual. T...

    Hirtshals, Denmark
  • Alfa Laval VNPX 410S-34G separator

    Alfa Laval VNPX 410S-34G separator module for clarification of liquids

    • Manufacturer: Alfa-Laval
    • Model: VNPX-410

    This separator module is normally used for clarification of juice, wine, beverage, stick-water, soup and other liquids with smaller amount of suspended particles, that needs to be separated from the product. Oper...

    Hirtshals, Denmark
  • Alfa Laval VNPX 407SGP-34 separator

    Alfa Laval VNPX 407SGP-34 separator for juice, wine and beverage clarification.

    • Manufacturer: Alfa-Laval
    • Model: VNPX-407

    For juice, wine and beverage clarification and polishing. Hydraulic capacity (pure water) is around 7.000 l/hour. The separator will be delivered including set of tools and manual. Motor: 11 kW, 380 V, 50 Hz.

    Hirtshals, Denmark
  • Alfa Laval WSPX204-TGT-74. Used for

    Alfa Laval WSPX204-TGT-74. Used for separating tramp oils from cooling liquids.

    • Manufacturer: Alfa-Laval
    • Model: WSPX

    Separator used for removing tramp oils from washing water. Including set of tools and manual. Motor: 2,2 kW, 50 Hz, 380 V, 1430 rpm, 5,4 Amp

    Hirtshals, Denmark
  • Alfa Laval WSPX204-TGT-74. Used for

    Alfa Laval WSPX204-TGT-74. Used for separating tramp oils from cooling liquids.

    • Manufacturer: Alfa-Laval
    • Model: WSPX

    Separator used for removing tramp oils from washing water. Including foundation frame, set of tools and manual.

    Hirtshals, Denmark
  • Alfa Laval WSPX204-TGT-74. Used for

    Alfa Laval WSPX204-TGT-74. Used for separating tramp oils from cooling liquids.

    • Manufacturer: Alfa-Laval
    • Model: WSPX

    Separator used for removing tramp oils from washing water. The machine will be reconditioned at order. Including set of tools and manual

    $9,482 USD

    Get financing

    Est. $186/mo

    Hirtshals, Denmark
  • Westfalia separator type SAMN 15007

    Westfalia separator type SAMN 15007 in purifier configuration

    • Manufacturer: GEA

    Complete Westfalia separator, type SAMN 15007. Amount of discs: 69 Permissible density of product to be treated: Heavy liquid - kg/dm3: 1,0 - solids: kg/dm3: 1,2 Motor: 25 kW AEG, 2940 rpm, 47 Amp., 50 Hz, 38...

    Hirtshals, Denmark
1234

Overview

Disc separators (centrifugal separators) are high-speed machines that use centrifugal force to separate liquids of different densities or remove solids from liquids. Common in dairy, oil, chemical, and wastewater processing, they have stacked discs to increase separation area and efficiency. Models vary by capacity, feed type (continuous or intermittent), corrosion resistance, and servicing access. Buyers choose based on throughput, G-force, material compatibility, and ease of maintenance.

FAQ

What should I check when buying a used disc separator?

Inspect the bowl and discs for wear or corrosion, check bearings, seals, and drive system, review maintenance records, confirm capacity and G-force ratings, and verify spare-parts availability and documentation.

How do I prepare a disc separator for shipping?

Drain all fluids, clean residues to meet hazardous-material rules, secure rotating parts, block the bowl, use manufacturer-approved lifting points, crate or skidd for stability, and provide accurate weight and dimensions to the carrier.

What ongoing maintenance is required?

Perform daily checks on vibration, temperature, and seals; schedule bearing lubrication or replacement, bowl and disc inspection, gasket/seal changes, and follow the OEM service intervals for rebuilds and balancing.