Used Drilling Rigs in Kentucky, USA

2018 JUNJIN JD-800EII

• Manufacturer: Junjin
• Hours: 6,132 h

2018 JUNJIN JD-800EII CRAWLER VERTICAL DRILL, Cummins QSB6.7 Tier 4 Motor, 175hp, 6132 Hours, EROPS, AC, Backup Camera, Yamamoto YH80A Drifter with 2199 Hours, Kawasaki Variable Piston Hydraulic Pump, Carousel Ty...

2005 ATLAS COPCO ECM660 III

• Manufacturer: Atlas-Copco
• Model: ECM 660 III
• Horsepower: 260 hp
• Drill Pipe Diameter: 51 mm

Montabert HC160 Drifter Setup for T45 Cummins Diesel Engine Unit shows 2,307 engine hours, we estimate approximately 12,307 total frame hours 3,949 Percussion hours

2004 ATLAS COPCO ECM660 III

• Manufacturer: Atlas-Copco
• Model: ECM 660 III
• Horsepower: 260 hp
• Drill Pipe Diameter: 51 mm

3.5 – 4.5 Inch Class Montabert HC160 Drifter Very Well Maintained Unit 7036 Total Frame Hours 2251 Percussion Hours

1999 SANDVIK D45KS

• Manufacturer: Sandvik
• Model: D45KS
• Hours: 26,358 h

1999 SANDVIK D45KS VERTICAL DRILL, Cat 3406E, 450hp, 26358 Hours, 29.5" Tracks, 60%, EROPS, Heat/AC, 95' 3x30' Drill, 6 3/4" Drill Bit, 1050/100 Air, Drill Has Been Gone Through Top to Bottom, Too Many New Parts ...

1998 Ingersoll Rand DM-45E

• Manufacturer: Ingersoll Rand
• Model: DM-45E
• Horsepower: 600 hp
• Hours: 500 h

Used Ingersoll Rand DM-45E Rock Drill for sale. CAT® 3406B -Remanufactured Engine -Final drive needs repair -Hydraulic pumps need replacing

1997 INGERSOLL-RAND DMLSP

• Manufacturer: Ingersoll Rand

DTH Class Single Pass Drill Rig – 55’ft – 60’ft Mast Cummins QSK19 Diesel Engine High Pressure – IR HR2.5 – 1050 CFM @ 350 PSI Onboard Air Compressor CAT 330L&S Undercarriage

2005 INGERSOLL_RAND ECM 370

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

2024 SOOSAN JD1400E-II

• Manufacturer: Soosan

2023 Year – JD1400EII Rock CommanderHandles a 14’ft lead rod and changes 12’ft thereafter. Carries 86’ft of drill steel onboard. New Features: Operator Comfort – Enlarged operators cabin with movable drill contro...

INGERSOLL-RAND ECM350

• Manufacturer: Ingersoll Rand
• Model: ECM-350
• Drilling depth: 4,356 m
• Mast Height: 5,753 m

2.5 – 3.5 Inch Class VL140 Drifter Comes with 3 Air Compressors This is a Complete Drill Package with 3 Ingersoll-Rand Portable Air Compressors

1984 INGERSOLL-RAND CM351

• Manufacturer: Ingersoll Rand
• Model: CM-351

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

1998 GARDNER-DENVER 300

• Manufacturer: Gardner Denver

3.5” – 4.5” Inch Class CAT 3126 Diesel Engine Self-Contained Hydraulic Drill HPR1H Hydraulic Drifter New Injection Pump 2017 Handles a 20’ft starter steel Set up for T45 Low frame Hours Extendable Boom Dust Colle...

2003 SANDVIK D55SP

• Manufacturer: Sandvik

DTH Class 3508 Cat Engine Single Pass Unit Currently using a 8” DTH Hammer with a 9” Bit Equipped w/ ( 2 ) 6 ½” x 25 ft. Drill Pipe w/ 8” DTH Hammer Dust Collector Mast 73’ Long, U/C 85% – Excellent condition. Un...

2014 ATLAS COPCO FLEXIROC T45-10

• Manufacturer: Atlas-Copco
• Model: FLEXIROC T45
• Horsepower: 225 hp

2014 Year – Atlas Copco FlexiRoc T45-10 Powered by a Caterpillar C9.3 Diesel Engine472 CFM @ 174 PSI onboard Air Compressor COP3060 Drifter 13,219 Total Hours 4,922 Percussion Hours Set up for T51 (51mm) Drill St...

GILL BEETLE

DTH Class Drills Holes 4 to 24 in Diameter Able to Drill Holes Vertically, Horizontally, and Every Angle in Between Has a Hydraulic table for up to 9 opening IR-360 DTH Hammer w/ Bits 8.5 and 7.5 IR-350 DTH Hamme...

2020 Sandvik DP1500I

• Manufacturer: Sandvik
• Model: DP1500
• Operating weight: 23,000 kg

2,295 total hours & 1,015 percussion hours Cat C13 Tier 4 Diesel Engine Drifter / Rock Drill is a RD1635CF Excellent condition