Used processing in Wallonia, Belgium

Sandlabo sand compactability tester GF/PVG

• Manufacturer: GF

Dimensions: Width: 215mm, Depth: 610mm, Height: 530mm with somples sleeve Ø 50mm H120 mm

Belt convoyor with sand arerator 3,56m×0,5m

External dimensions: Lenght: 3800mm; Width: 1050mm; Height: 560mm Used dimensions: Lenght 3560mm; Width: 500mm Motor: 1,1KW, 220/380V, 125r/min Chain drive, motor sand acrator 0,5 PS; 380V; 71,4 r/min

Band sander REMA vertical and horizontal

• Manufacturer: Merz

Motor: 1,8-2,2 kW, 380 V, n° 091670; 1450/2900 rpm, type FDR90L IP44 T-notch table with 2 speeds with dust collector in the base

Thickness gauge ELCOMETER

With box (microns) Weight: ± 3 kg | Dimensions: length 160 mm, largeur 85 mm, height 40 mm | Motor: 3 V, 2 batteries 1AA | Measuring gauge: 1 to 1250 µm

1992 Vibrating conveyor 1600mm x 590mm

• Manufacturer: ZIPPE

External dimensions: length 1650mm, width 960mm, height ± 800mm Motor: 2x 0,81 kW, 230/400 V, brand AEG, type vibrating motor, 1410 rpm, serial number 96005867 On 4 rubber springs

Vibrating conveyor KÜTTNER 4000mm x 800mm

• Manufacturer: Küttner

External dimensions: length 4150mm, width 1940mm, height 1500mm Motor: 2x 1,7 kW, 230/400 V, brand CYRUS, type vibrating motor, 980 rpm With base construction and releability ripcord

Screw mixer AXMANN 5 t/h

• Manufacturer: Axmann

External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...

2013 Pneumatic sand feeder KLEIN 75 l CE

Max. pressure 7 bar With pneumatic cone fastener Inlet Ø 100mm Outlet Ø 70mm With CE n° 0045

1998 Gassing unit coldbox LÜBER LW-FDA-825i

• Manufacturer: Lüber
• Model: LW-FDA 825

Gas pressure is regulated by proportional valve Gas dosing is made by high speed counting All parameters are introduced in the machine panel -gassing pressure -main gassing pressure -pressure ramp -gassing time -...

horizontal centrifugal casting machine VEB

Motor VEM DDR, type ring CLU 296/4-FW15Z, 3,33 /10 kW, 220/380 V, 650/1950 rpm Each with a different shell diameter Available: 8 x Ø 230-231 mm, length 400 mm 1 x Ø 160-161 mm, length 440 mm With mechanical brake...

1986 Core sand mixing line KLEIN, ± 2 t/h

Vibratory mixer Sand distributor system Panel Without mixing vessel

Small screw conveyro, 920 mm, Ø 145 mm

• Manufacturer: Kleine

External dimensions: length 2120mm, width 435mm, height 270mm Motor: 0,5 kW, 220/380 V, brand BAUER, 690 rpm, outlet: 19 rpm Second entrance possible

Core sand mixing plant STEFFENS, type SM30

Boltmixer, fastmixer Volume testing device for sand With 2 pumps With control board SIEMENS S5 With powder support With pneumatic depletion flap Spare mixer (second-hand) With cleaning flap

Mobil articulated arm screw mixer AXMANN, 10 t

• Manufacturer: Axmann

Dimensions: length 7200 mm, width 1900/1500 mm, height 3600 mm With rail trolley With sand hopper With pneumatic brake With 2 pneumatic slides for sand inlet

2005 Core sand mixing plant LAEMPE SM7, 3 t/h

• Manufacturer: Laempe / Röperwerk

With sand bunker and volumetric dosing With electric sand preheater Resin and hardener dosed by volumetric glass tube pumps (bulbs) With additive (powder) hopper, volumetric dosing