- Trusted Seller
Cast iron clamping plate - 2100/1700/H1030 mm 15095
- Manufacturer: Guss
Clamping plate, welding table, welding table, straightening plate, perforated plate -casting plate -vice
$2,053 USDWiefelstede, Germany - Trusted Seller
Angle of cast iron - 1155/200 / H160 mm 24577
- Manufacturer: Guss
clamping angle, clamping aid -side stop rails Angle off: aluminum | Clamping angle for: Workpiece clamping | Dimensions: 1155/200 / H160 mm | Mass: 22 | Internal storage: 3C30105
$458 USDWiefelstede, Germany - Trusted Seller
2008 Manousek AVOR 1108/10
- Manufacturer: Manousek
Casting machine for balancing weights - steel rims Zinc die casting including spiral conveyor RNA Type SR8-B-250-2L PLC control voltage: 24V, current consumption: 25A, Dimensions: LxWxH: 2900x2380x2410mm, Weight:...
Altenstadt, Germany Green Fire 2 burner Profi Line barbecue system - Enameled grill plate & cast iron grill grate
Product details Green Fire 2 burner barbecue system Profi Line - Enameled grill plate and cast iron grill grid GN 1/1 Less heat fluctuation due to air turbulence thanks to the vestibule and optimum air supply. Ea...
$762 USDMeinerzhagen, Germany
2001 FRECH M200/120
- Manufacturer: Frech
Used machine furnace make Meltec type M 200/120 for use on hot chamber die casting machines make Oskar Frech with 200 tons for processing magnesium alloys. Melting capacity per hour 120kg/h 54 kW connected load. ...
Schorndorf, Germany
2014 FRECH ZC200/250
- Manufacturer: Frech
Used machine furnace make Meltec type ZC 200/250 for use on hot chamber die casting machines make Oskar Frech DAW 200 for processing zinc alloys. Melting capacity per hour 250kg/h 36 kW connected load. Switch cab...
Schorndorf, Germany
1998 FRECH Weightcontrol 2000
- Manufacturer: Frech
Used scales for use on die casting machines up to a unit weight of 2000gr. The device was checked and repaired by the manufacturer. Weighing cell and control board replaced
Schorndorf, Germany
1994 FRECH MOS 5/20 U
- Manufacturer: Frech
Used furnace for use on DAW5 or DAW20 die casting machines without furnace cabinet
Schorndorf, Germany
2024 FRECH W200Zn-ST
- Manufacturer: Frech
Equipment of the machine 1.1.1 Motorized safety gate on the right in the casting direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment package - energy efficiency 2.0.1 Ejector assista...
Schorndorf, Germany
2004 Robamat 5201
- Manufacturer: Robamat
Used heating device from Robamat for use on die casting machines. This single-circuit device is designed for temperature control of a die casting tool with oil. Dismantled from ongoing production. The device was ...
Schorndorf, Germany
1995 FRECH DAW 200S
- Manufacturer: Frech
Used die casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available by arrangement The manufacturer recommends a general overhaul in the overhaul plant. This can be carried out on requ...
Schorndorf, Germany
1999 FRECH DAM 315 S
- Manufacturer: Frech
Used die casting machine DAM 315 S with Datacontrol control for the use of magnesium alloys. Available from used machine stock. The machine is equipped with a Rauch type MMO 315E electric furnace. Without sprayin...
Schorndorf, Germany
2003 Frech Espana DAW 125 PD SBC3
- Manufacturer: Frech
Used die casting machine DAW 125 with SBC3 control for the use of zinc alloys. Available as a basis for a general overhaul at the manufacturer's plant
Schorndorf, Germany
2024 FRECH W20Zn-RC
- Manufacturer: Frech
Equipment of the machine 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment...
Schorndorf, Germany
2000 FRECH ZC80/180
- Manufacturer: Frech
Used furnace cabinet for die casting machine make Frech type DAW 80 - suitable for multi-chamber furnace make MELTEC - type 80/180 with individual controllers. Function tested by the manufacturer.
Schorndorf, Germany
Tip: Enter manufacturer, model or keyword
