Used Processing in British Columbia, Canada

Minpro 12in x 18in Duplex Mineral Jig

• Manufacturer: Minpro

Feed Trough: Hoppers: Tapered to 1.5in Motor: Overall Dimensions:

60 Inch Ball Mill Bearing

60 Inch Ball Mill Bearing. Completely forged and machined. Housing with all oil and water journals. Plus babbitt. Shipping information: Dimensions (L x W x H): Weight: 1950 lbs.

Howard Marten Co. Ball Mill Journal Lift and Lubrication System

• Manufacturer: Howard

High Pressure and Low Pressure Circuit Twin Grayco Fire-Ball Air-Operated Pressure Pumps (1) Low Pressure Lube Pump (50 PSI) Direct Coupled All mounted on an Approx. 130 Gallon Oil Holding Tank Complete with Oil ...

4ft x 5ft Custom Built Ball Mill

• Manufacturer: Custom Built

Tire Drive Configuration Drive: 3-Phase Size: 4ft x 5ft | Feed type: Center Feed | Discharge type: Overflow | Hp/kw: 20/15 | Rotation speed: 3520 RPM | Voltage: 230/460 Volts | Current: 43.8/21.9 Amps

Citic 21ft Dia. x 33ft Long Ball Mill

• Manufacturer: Citic Heavy Industries

Complete Mills Diameter: 21ft (6.4m) | Length: 33ft (10m) | Discharge: Trommel Discharge | Drive: Electric Motor | Power output: 6500kW | Frequency: 50Hz

Union Ironworks 4 ft x 4.5ft Ball Mill

• Manufacturer: Union

4 ft x 4.5 ft Belt drive pinion gear. 17 teeth. 48 in. dia. pinion shaft pulley. 50 hp electric motor. 8 3/8 in. dia. motor drive pulley. Straight cut bull gear (96 teeth). Complete with scoop feed and trough. Mo...

Denver 4 x 6 Ball Mill

• Manufacturer: Denver

Rubber Liners Straight Cut Gears Bull Gear 126 Teeth Pinion Gear 17 Teeth Mounted on Steel Operating Stand 40 HP Electric Motor 460 Volt 60 Hz. 880 RPM 55 AMP Belt Drive through Jack Shaft Final Mill Speed Approx...

Dryair Central Heating Module

• Manufacturer: DryAir

Dryair Central Heating Module 2 Units Available Comes with Natural Gas Conversion Please See Specs Tab Below for More Detailed Information Specs

Flagro FVO-400 Portable Heater

• Manufacturer: Flagro

Heater Electrical Rating: Overall Dimensions: Input range: 325,000 - 390,000 BTU/Hr. | Fuel: Diesel, Kerosene, No. 1 or No. 2 Fuel Oil | Pump pressure: 170 PSI Max | Fuel tank capacity: 42 Gallons | Fuel tank dim...

PM Wright 7.5 kW Electric Duct Heater

• Manufacturer: Wright

PM Wright 7.5 kW Electric Duct Heater. Dual units Serial No. 66879-01-1. 600V. 3 Phase. 432 feet per minute. Complete with Delhi Industries internal blower between heaters. Model 207 INS 1/4 hp Belt Drive Motor 1...

Caloritech 40kW Forced Air Heater

Caloritech 40 kW Forced Air Heater. 9 available. 136,480 BTU/hr. 1500 cfm. 43 m³/minute. 600V, 3 phase. Shipping information: Dimensions (L x W x H): 22 in. x 24 in. x 20 in. 56 cm x 61 cm x 51 cm. Weight: 100 lb...

Crouse Hinds 5 kW Explosion Proof Heaters

• Manufacturer: Crouse-Hinds

5 kW Heaters: Explosion Proof. Force Air. 5 KW (500 CFM). 240 Volts. 60 Hertz. Phase 1 ---- these were installed and never used and then de-installed --- same as new --- guaranteed new and perfect. US 1/2 HP Moto...

Caloritech 60 kW Immersion Heater

Caloritech 60 kW Immersion Heater. 575V. 3 phase.

GEA 65 m2 Spiral Heat Exchanger

• Manufacturer: GEA

Good condition. Surface area: 65 m2. | Weight: 30 KN (~7000 lbs).

Fromson 1940 ft2 SS Tube Heat Exchanger

• Manufacturer: Fromson

Shell side: Tube Side: In good condition. Mfg: Fromson Heat Transfer. | Surface area: 1940 ft2. | Materials: SA-240; TP 304L. | Max pressure: 100 PSI. | Max temp: 300 F.