Used Tanks & Kettles in Ontario, Canada

Sanitizer tank
-3 legs stand 4’ off the ground -3” spout at the bottom with a 2” off spout off that -Removable lid -Shipping dimensions: 115” tall 27” diameter -Tank dimensions: 24” die x 51” tall -Two Sight glasses on the side...
$2,582 USD
Brant, Canada
Steel tank
-Tank dimensions: 145" tall x 62" -Cone bottom with a 3" drain -Top with lid -On steel legs
$789 USD
Brant, Canada
Poly tank
-Plastic flat bottom -Manhole on top -On ss frame base (dimensions: 22” tall x 103” wide x 103” long) -Small port at bottom 3” diameter -Tank dimensions: 130” diameter x 113” tall 9’ tall -5,406 Imp Gallons -6,49...
$4,303 USD
Brant, Canada
Standing tank
CATEGORY: Tanks - 15 imp - stationary - flat bottom -with half closing lid - legs are 30" -51" tall -stainless steel
$789 USD
Brant, Canada
Tank on legs
-3 Legs and stationary, -Open top, -34" from the ground to the bottom of the tank, -83" tall, Stainless steel, -78.27 IMP
$574 USD
Brant, Canada
Trusted Seller
Single Wall Tank
This stainless steel tank is 45" diameter x 63" deep with 60" sidewalls and a dish bottom. Approximately 400 gallon. It has a 1 piece hinged lid with 2 - 2" outside diameter sani clamp connection inlets. There is...
Barrie, Canada
Trusted Seller
Single Wall Tank
This single wall tank is 61" diameter x 59" tall (54" sidewall), 2650 litre (700 gallon). The tank has a 2" inside diameter bottom centre threaded outlet, that's 14.75" from the floor. It has mild steel legs and ...
Barrie, Canada
Mixing tank
- Manufacturer: Nord
- Nord mixer on top: 2791 ratio, 63 speed - Nord motor: 1765-145 RPM, 230/460V, 5HP - Diameter is 34" -height is 40" -130 IMP - Overall height 81" - 4 legs are 23" - Stainless steel - Chemical use - Dome bottom
$4,447 USD
Brant, Canada
Mixing Tank
- Nord mixer on top: 2791 ratio, 63 speed - Nord motor: 1765-145 RPM, 230/460V, 5HP - Diameter is 34" -height is 40" -130 IMP -overall height 81" - 4 legs are 23" - Stainless steel - Chemical use - dome bottom
$4,447 USD
Brant, Canada
Trusted Seller
SEDA UTILITY TANKS ULC-S601
- Manufacturer: SEDA
Available in custom sizes. CUSTOMER TESTIMONIAL ”The professional service provided by ELV Select deserves to be complimented. We are very pleased with our new SEDA de pollution system and supporting equipment. I ...
Fergus, Canada
Trusted Seller
Product Feed Tank
This tank has a clamp down removable lid with 3 - 2" outside diameter sani clamp connection inlets (one has a filter vent attached to it). It has a 31" long centre shaft with a screw auger on the bottom to feed t...
Barrie, Canada
Tank with mixer
-4 stationary legs -Flat bottom -304 stainless steel -Meanwhile on top -Mixer blade on inside -772 IMP
$2,008 USD
Brant, Canada
Poly Tank
-Shipping dimensions: 26 1/2" L x 26 1/2" W x 58" H -About 90 imp gallons
Brant, Canada
Stationary tank
-Open top with lid -Stationary with fork lift accessible flat bottom -Diameter is 32.5" -Height is 47.5" -207 IMP
$703 USD
Brant, Canada
Horizontal Tank
- Manufacturer: Sharpsville Container
-203 IG -MAWP 100 psi @250 F -MDMT -20 F @ 100 psi -9" from the ground to the bottom -64" tall -Certified by Sharpsville container
$3,443 USD
Brant, Canada