Used Foundry & Casting in Germany

1991 LAEMPE SM 5 3.5 T
- Manufacturer: Laempe / Röperwerk
Charge 70 kg, cycle time 70 s, capacity approx. 3.5 t/h, drive power 5.5 kW, connected loads 380 V, 50 Hz, volumetric sand dosing, binder dosing, control system
Meinerzhagen, Germany
2015 SEGAB PROMIX 150
- Manufacturer: Segab
Charge min./max. 50/150 kg, capacity approx. 3 t/h, pneumatic discharge lock, drive power 9.2 kW, connected loads 400 V, 50 Hz, safety interlock (on cleaning door and mixer hood)
Meinerzhagen, Germany
2006 SEGAB PROMIX 150
- Manufacturer: Segab
split daily silo (new sand/regenerated) of 2 m³ each, dust explosion filter, 2 sand heater-sieves, sand dosing, batch mixer 150 kg, ColdBox component dosing, core sand distribution wagon, electrical PLC control
Meinerzhagen, Germany
1991 LAEMPE core-shosing machine L-10 HB
- Manufacturer: Laempe / Röperwerk
Four-column machine, shooting volume 10 l, horizontal/vertical core box divider, clamping & separating device, electric heating plates, discharge carriage, gassing carriage, hydraulic unit, safety cabin, sand hop...
Meinerzhagen, Germany
RÖPER H 2,5
- Manufacturer: Laempe / Röperwerk
Table machine, shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, clamping device, vibrating feed chute, manual lever control
Meinerzhagen, Germany
RÖPER H 2,5
- Manufacturer: Laempe / Röperwerk
Table-top machine, shooting volume 2.5 l, core box max. 280x 280/400 x 225 mm, manual adjustment of the upper part, clamping device, vibrating feed chute, housing, electric PLC control, two-hand control panel, Co...
Meinerzhagen, Germany
1999 LAEMPE Core Drilling Auto LKFZ 40 (L-40)
- Manufacturer: Laempe / Röperwerk
- Model: LKFZ 40
Shooting volume 40 l, vertical/horizontal core box division, core box max. 1000 x 650/1190 x 900 mm, vacuum clamping/separating device, sand hopper, cabin, gassing device, hydraulic unit, core sand mixer SM7_3t/h...
Meinerzhagen, Germany
VOGEL & SCHEMMANN MISCHKA I GF/70 "A"
- Manufacturer: Vogel
Batch max. 50-75 kg, container Ø 530 x 400 mm, capacity max. 1 t/h, drive power 2.2 kW, connected load 380 V, 50 Hz, hand lever door lock, control with emergency stop push button, tilting lid with position limit ...
Meinerzhagen, Germany
1986 STEFFENS DUO-MIX 1
- Manufacturer: STEFFENS
Batch max. 80 l/120 kg, container Ø 600 mm, dual mixing principle: side and bottom mixing arms, capacity 2-3 t/h, drive power 4 kW, connected load 380 V, 50 Hz, pneumatic closure, safety limit switch, control wit...
Meinerzhagen, Germany
1978 VOGEL & SCHEMMANN KSM 6.10.02
- Manufacturer: Vogel
Four-column machine, shooting volume 10 l, core box max. 510 x 450 x 450 mm / ___ kg, clamping/separating device, discharge carriage with lifting device, gas flushing plate, vibrating conveyor chute, control unit
Meinerzhagen, Germany
1989 RÖPER / LAEMPE LKV H 5
- Manufacturer: Laempe / Röperwerk
Single-column machine, shooting volume 5 l, horizontal/vertical core box division, manual table height adjustment, vacuum clamping device, vibrating infeed chute, safety housing, electric PLC control with two-han...
Meinerzhagen, Germany
1988 LAEMPE core shooting machine L-5
- Manufacturer: Laempe / Röperwerk
Shooting volume 5 l, horizontal and/or vertical core box division, vacuum clamping and separating device, hydraulic unit, safety cabin, sand hopper, electric control B+R
Meinerzhagen, Germany
2013 SEGAB PROMIX 2x 200
- Manufacturer: Segab
Divided daily silo (new sand/regenerate), capacity approx. 7 m³, dedusting filter, 2 sand heater sifters, sand dosing, 2 batch mixers á 200 kg, Pep Set component dosing, steel support structure, electric PLC cont...
Meinerzhagen, Germany
1990 IDRA OL 560PRP #1077-03051
- Manufacturer: Idra
- Model: OL 560PRP
Mold spraying machine Manufacturer Acheson, Model DAG 1000 FCT S-B AB, Year of manufacture 2001, Foundry robot Manufacturer ABB, Model IRB 440F / 45, S4C-Plus control system, Year of manufacture 2004, Deburring p...
Dorsten, Germany
1988 WEINGARTEN GDK 1000 #1077-03050
- Manufacturer: Weingarten
- Model: GDK 1000
Mold spray machine available Manufacturer Acheson Model DAG 1000 FCT 2TB Year of manufacture 2002 Foundry robot present Manufacturer ABB Model IRB 6600 Control S4C-Plus Year of construction 2003 Deburring press a...
Dorsten, Germany