Used Food & Beverage Processing in Oregon, USA

Krones Campac Case Packer

• Manufacturer: Krones

Item is a used Krones Campac case packer with (4) Krones PLC cabinets. Manufactured 1995. Change parts to include 12 oz long neck, 12 oz. stubby, 16 oz. and 22 oz. Max motor amps = 4.3 - Full load amps 55.0 460/3...

Sandpiper Double Diaphragm pump

• Manufacturer: Sandpiper

Item is a used, Warren Rupp, Sandpiper, heavy duty, flap valve, stainless steel, double diaphragm pump w/2" ports. Pump is mounted on cart

WS Packaging Label Applicator

• Manufacturer: WS Packaging

Item is a used, WS Packaging model ASD Compact label applicator set up for a #3 label wind, RH machine. The machine has been integrated with a new, S/S, variable speed conveyor, wrap station and back plate on a c...

new stock - 40cm x 40cm filter (30 plates)

Item is a new stock plate and frame filter. This is a 40cm x 40 cm plate and frame filter with 30, black noryl plates. This is a new stock machine fabricated in Europe. Machine includes valves, sight glass and sa...

Used BSV 7 bbl brewsystem

Item is a used BSV 7 bbl Steam combi brewhouse with support equipment. The brewhouse was built new in 2015 and has been installed since that time in a small brewpub. The system was used sparingly during covid and...

Resina Model S-30 Capper

• Manufacturer: Resina

Pack West Model A120 "Torquer"

• Manufacturer: Pack West

Item is a used, Pack West model A-120, fully automatic, cap torquer. The machine is designed to apply additional torque to caps having the threads previously engaged with the container, It is often utilized after...

A Packaging Systems Inline Capper

• Manufacturer: A Packaging Systems

Item is a used, A Packaging Systems , 6 quill, inline capper designed to roll up to an existing conveyor. The machine operates from right to left. It is equipped with a single pair of container gripper belts. It ...

New Stock 1-1/2hp Thomsen Pump

New stock - 1-1/2 hp Thomsen stainless steel #4 pump assembly with 1-1/2 in/out TC fittings, 3450 rpm washdown motor. 208/230/460 3 phase electrics, mounted to stainless steel cart with wheels. (Single phase, 1 1...

PACO S/S Pump

condition: Very Good Item is a used, PACO, S/S centrifugal pump with 2" x 1 1/2" flanged ports. Motor is 5 HP Baldor, 3450 RPM, 230/460 volt- 3 phase. Comes with power cord w/ON-OFF switch. Previous use/distillery.

Coker 3 x 2 S/S pump

• Manufacturer: Coker

Item is a used, Coker model C328-MDG, S/S, centrifugal pump. Pump is powered with Baldor 71/2 HP, S/S motor turning @ 1750 RPM Pump has clamp style 3 x 2 ports and clamp on head. 3", S/S, clamp style butterfly va...

Hartness Lowering Head Case Packer

Item is a used, Hartness model M 500, lowering head, drop style case packer. T,his is a very small footprint machine having a short bottle infeed section. The machine comes with change parts for 12 oz. longneck a...

Elliott Hot Melt Case Sealer

• Manufacturer: Elliott

Item is a used, Elliott, hot melt, top only case sealer model 76-10 custom. The machine is equipped with a Nordson Problue glue system and Saturn right angle nozzles. The infeed end of the machine is fitted with ...

Best Pack Taper

Item is a used, Best Pack, semi-automatic top/bottom case taper. Machine is equipped with side belt drive, and top only, 2" tape head. 120 volt single phase power requirement

Quincy NW 75 HP rotary screw compressor

• Manufacturer: Quincy

Item is a used, Quincy NW, 75 HP rotary screw compressor. This is a water cooled machine. Radiator included. Air receiver tank is not included in the price, but can be provided at additional cost.