Used Food & Beverage Processing in Oregon, USA

(4) available - Used JV Northwest 930 Gallon / 30 bbl brite tanks

• Manufacturer: JV Northwest

JV Northwest 930 gallon / 30-BBL Jacketed Stainless Steel Brite Beer / Serving Tank; 304 SS, Dome Top, Dished Bottom, , Dimple jacket sidewall that wraps the majority of the boddy of the tank. Top Manway, 1-1/2″ ...

Paxton dual pump air knife

Item is a used, Paxton air knife. This is a dual drive, dual blower machine utilizing two 15 HP motors.

Horix Rotary Filler

Used Horix, model HA-20 Hytamatic filler. The machine was manufactured in 1980. This is a pressure filler utilizing a level sensing, no contact valve for highly accurate fills. Valve operation is pneumatic. Machi...

BEVCO low level gripper rinser with fallen bottle detector

• Manufacturer: Bevco

Used Bevco low level gripper rinser - - (2) Food grade rubber belts: - Grips bottles - Bottle spacing: 4 inches (adjustable) - Included: - Drives - Infeed conveyor - Outfeed conveyor - Spray bars - Controls - St...

Used Pall Oenoflow FIT Crossflow Filter

• Manufacturer: Pall

Item is a used Pall Oenoflow FIT Crossflow filter - Manufactured in 2017 and last used in a hard cider manufacturing facility. The machine is represented in good shape showing light usage and excellent maintenanc...

Standard Metals Gravity Filler/Briner

Used Standard Metals gravity filler/briner. The machine has 24 valves and is currently set up as a briner/finisher for pickle jars. The machine was purchased in 1992 at a cost of approximately $95,000. It was use...

Federal 18/5 Filler Capper

Item is a used, Federal S/S 18 valve gallon filler with 5 head pressure pad capping turret. Machine operates from left to right (clockwise rotation). It is equipped with 1 1/8 inch, diaphragm style filling nozzle...

Single Head Piston Filler

Item is a single station piston filler. This is a bench top machine having a single piston with 500 ml capacity. The piston operates off a pneumatic cylinder. The cycle is initiated with a foot switch. 120 VAC is...

Sentry Rinser/Lowerator

• Manufacturer: Sentry

Item is a used, Sentry, Ionized air rinser/lowerator. Machine is constructed with mild steel frame and has an infeed height of 13'7" and a discharge height of 4'. Small footprint "S" configuration. Machine is set...

MRM Rotary Filler

Used MRM, 12 valve, rotary, vacuum filler. The machine was recently rebuilt and a new feedscrew drive (Morrison Timing Screw Co.) and vacuum system was added to the machine. The machine is set up for right to lef...

Federal Filler 26/6

• Manufacturer: Federal

Item is a used, Federal S/S, 26 valve filler set up with a 6 head, preessure pad capper. The machine is equipped with 1 1/8 inch spring style valves (not diaphragm) for hot or cold fill application. The machine w...

Scrap Saver Plastic Strap Chopper

Used Scrap Saver Series 100 plastic strap chopper. The machine was manufactured by TriTec Corp in Portland, Oregon. Electrics are 220/60hz/1phase. Serial Number 114. The machine is located in our Portland, Oregon...

Hinds Bock 128 oz. depositor/PUMP

• Manufacturer: Hinds Bock

Item is a used, Hinds Bock 128 oz., pneumatic drive, piston depositor/pump. Machine has all S/S contact parts and 3" ports. Machine is mounted on a S/S table with casters for portability.

SPX/Waukesha

• Manufacturer: Waukesha

Item is a used, SPX/Waukesha, 2 HP, centrifugal pump. It ids configured with a clamp style pump head and 2" X 1 1/2" tri-clamp ports. Drive motor is a Baldor, 2 HP, S/S clad energy efficient, 1755 RPM. 230/460 vo...

Pneumatic Scale/Pfaudler Filler

• Manufacturer: Pfaudler

condition: Excellent Used Pneumatic Scale/Pfaudler 35 station, rotary, piston filler. The machine was manufactured in 2000. It was running a 12 oz. juice concentrate container. It operates with a counter-clockwis...