Processing » Foundry & Casting » Wallonia

Building Filters

Related Events

Live Now

Westport Millwork

by EX-FACTORY, INC

Sterling VA, USA
Ends Sep 11th, 15:00 CDT
View event
1440

Used Foundry & Casting in Wallonia, Belgium

  • Trusted Seller
    1974 Impact breaker HAZEMAG AXMANN

    1974 Impact breaker HAZEMAG AXMANN

    • used

    • Manufacturer: Axmann

    External dimensions: 2100 mm x 1150 mm, h. 1200 mm | Motor: 11 kW, 15 hp, 1460 rpm, 220/380 V | Opening: 500 mm x 400 mm | Rotor width: 450 mm

    Amel, Belgium
  • Trusted Seller
    Lance for temperature measurment SIDERMES

    Lance for temperature measurment SIDERMES with wall display

    • used

    • Manufacturer: SIDERMES

    With cable Weight: 10kg | Lenght: 1600mm | Useful dimensions: 600mm et 600mm

    Amel, Belgium
  • Trusted Seller
    Endoscope KINOPTIK

    Endoscope KINOPTIK

    • used

    • Manufacturer: KINOPTIK

    with electric cable and light flexibles-cable in wooden box

    Amel, Belgium
  • Trusted Seller
    Moulding machine HEINRICH WAGNER HRP1.1

    Moulding machine HEINRICH WAGNER HRP1.1

    • used

    • Manufacturer: Heinrich Wagner

    Outer dimensions: length: 850mm; width: 1300mm; height: 1950mm Moulding box min: lenght: 450mm; width: 350mm Moulding box max: length:1000mm; width: 600mm With control board and emergency stop

    Amel, Belgium
  • Trusted Seller
    Thickness measurement with ultrasound KRAUTKRAMER

    Thickness measurement with ultrasound KRAUTKRAMER BRANSON

    • used

    • Manufacturer: Branson

    Type DME DL Dimensions: 250 ×230×120mm | Plage de mesure: 0,5mm à 300mm

    Amel, Belgium
  • Trusted Seller
    1999 Gazing unit LÜBER LW

    1999 Gazing unit LÜBER LW FDA 3250 32 kW

    • used

    • Manufacturer: Lüber

    32kW; 400V; 50Hz Dimensions: Lenght: ±1500mm; Width: ±900mm; Hight: ±1800mm The control for the gazing cycle is controled by the core shooter the unit is equiped by a smal amin vessel (±2l) with connection to a c...

    Amel, Belgium
  • Trusted Seller
    Vibrating conveyor JML 10000mm ×2000mm

    Vibrating conveyor JML 10000mm ×2000mm

    • used

    • Manufacturer: JML

    Outer dimensions: length: 11000mm; width: 2300mm; height:1200mm Inner dimensions: length: 10000mm; width: 1900mm; height: 150 mm Driven by 1 motor (15KW) With eccentric axle, driven by 5 V-belts Without counter s...

    Amel, Belgium
  • Trusted Seller
    Vibriting conveyor JML 1350mm×2000mm

    Vibriting conveyor JML 1350mm×2000mm

    • used

    • Manufacturer: JML

    Weight: 32t (2 parts: 15t and 17t) Outer dimensions: Length: 14000mm; Width: 2950mm; Height:1750mm Inner dimensions: Length: 1350mm; Width: 2000mm; Height: 150 mm Driven by 1 motor (15KW) With eccentric axle, dri...

    Amel, Belgium
  • Trusted Seller
    1981 Green sand mixer EIRICH

    1981 Green sand mixer EIRICH DWV 29/6, 6000 l

    • used

    • Manufacturer: Eirich

    With hydraulic discharge flap With 2 whirlers (swirler), 160 kW each With 2 cup drive motor, 150 kW each

    Amel, Belgium
  • Trusted Seller
    Bunker, ± 2 m³, with

    Bunker, ± 2 m³, with discharging conveyor

    • used

    External dimensions: length 4400 mm, width 1650 mm, height 2050 mm Dimensions of belt: length center distance 3650 mm, width 600 mm Plastic lining inside the bunker Drive via V-belt to slip on gear box

    Amel, Belgium
  • Trusted Seller
    2018 Pouring ladle ACETARC, with

    2018 Pouring ladle ACETARC, with transport foot, ± 1600 kg

    • used

    External dimensions: length 1600mm, width 1350mm, height 1700mm With useful lining With one long and one small spout With bold-on trunnions With transport foot for lift tracs With heat protection With type plate ...

    Amel, Belgium
  • Trusted Seller
    1998 Core shooter LAEMPE with

    1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

    • used

    • Manufacturer: Laempe / Röperwerk

    Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

    Amel, Belgium
  • Trusted Seller
    1998 Core shooter LAEMPE with

    1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

    • used

    • Manufacturer: Laempe / Röperwerk

    Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

    Amel, Belgium
  • Trusted Seller
    1998 Core shooter LAEMPE LB20

    1998 Core shooter LAEMPE LB20

    • used

    • Manufacturer: Laempe / Röperwerk

    Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

    Amel, Belgium
  • Trusted Seller
    Turnover moulding machine KÜNKEL WAGNER,

    Turnover moulding machine KÜNKEL WAGNER, WPM 1

    • used

    • Manufacturer: Künkel Wagner
    • Model: WPM 1

    Weight: 2600 kg | Dimensions: width 840mm, depth 2100mm, height 1740mm | Table: 700mm x 500mm | Maximum width (depth) of moulding boxes: 620mm | Pression: 5000 kg | Jolt capacity: 360 kg | Lowering stroke: 300mm

    Amel, Belgium
1213141516