Used Extruders

Farrel Model 9 FCM UM Continuous Mixer 10" Farrel Extruder FCM 9-10
- used
- Manufacturer: Farrel
Farrel Model 9 FCM UM Continuous Mixer SN: 65A2189-2 600 Hp Westinghouse Motor ( refurbished 7-2022 ) Gearbox was recently refurbished Farrel 10” Hot Melt Extruder - Hydraulic Ram Stuffer On Feed Section Scr...
Pittsburgh, PA
BRABENDER 25mm TWIN SCREW EXTRUDER 16813
- used
- Manufacturer: Brabender
Brabender model 088 twin screw extruder, air cooled. Includes DC motor and temperature control panel.
Elk Grove Village, IL
DAVIS STANDARD SINGLE STAGE EXTRUDER 12020
- used
- Manufacturer: Davis-Standard
4.5″ Davis Standard single stage extruder screw. Approximately 28:1 L/D with mixing pins at screw end.
Elk Grove Village, IL
Trusted Seller
16" Wire Cut Extruder
- used
16" Wire Cut Extruder - (6) Piston extruder - Hopper with roller to force product into pistons - (2) 6-outlet dies: 1-1/8” and 1-5/8” diameter dies - Wire-cut arm - Cantilevers over the front end of a conveyor - ...
New York, USA
Trusted Seller
Auction
Coperion Twin Screw Extruder Multi Hole Pelletizing strained Die Head previously used on 92mm
- used
- Manufacturer: Coperion Waeschle
Coperion Twin Screw Extruder Multi Hole Pelletizing strained Die Head previously used on 92mm
Evansville, IN
Visit Auction Website
DAVIS STANDARD 165mm (6.5″) EXTRUDER 19033
- used
- Manufacturer: Davis-Standard
One used (1) Davis Standard model 165MM60T 165mm (6.49″) extruder having a 34:1 L/D ratio with a nine (9) zone electrically heated, water cooled (closed loop), vented and plugged barrel at presently an 89″ center...
Elk Grove Village, IL
DAVIS STANDARD 2.5″ EXTRUDER BARREL 7778
- used
- Manufacturer: Davis-Standard
Davis Standard 2.5″ extruder barrel screw. 24:1 L/D.Three are available.
Elk Grove Village, IL
DAVIS STANDARD 165MM60TPIH 6.5″ EXTRUDER 10869
- used
- Manufacturer: Davis-Standard
Davis Standard model 165MM60TPIH, S/N X7206 27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, no control panel. Water cooled barrel. Last used as a secondar...
Elk Grove Village, IL
CINCINNATI 80mm TWIN SCREW EXTRUDER 18511
- used
- Manufacturer: Cincinnati
Used Cincinnati model CMT80L-APC 80mm conical counter rotating twin screw plastic extruder. S/N 2040985/010. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adapter plate that reduce...
Elk Grove Village, IL
BATTENFELD CM55 TWIN SCREW EXTRUDER 18510
- used
- Manufacturer: Battenfeld
Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. ...
Elk Grove Village, IL
LEISTRITZ 27MM TWIN SCREW EXTRUDER 18970
- used
- Manufacturer: Leistritz
Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05″ (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8 barrel housing section electrically heated, water cooled. (1) Degassing port. Maximum scre...
Elk Grove Village, IL
2″ PRODEX 24:1 EXTRUDER 16902
- used
Prodex 2″ 24:1 L/D extruder. Unit has an electrically heated air cooled non-vented barrel at approximately a 48″ center-line height. Gearbox is a link-belt model EX-1028-59 has a reduction ratio of 11.36:1 and is...
Elk Grove Village, IL
CINCINNATI 112mm TWIN SCREW EXTRUDER 18512
- used
- Manufacturer: Cincinnati
Used Cincinnati model Argos 112P-65-20-1150-UL 112mm parallel counter rotating twin screw plastic extruder. S/N 2041843/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ratio of 27:1. Barre...
Elk Grove Village, IL
Trusted Seller
Auction
Coperion Twin Screw Extruder Multi Hole Pelletizing strained Die Head previously used on 70mm
- used
- Manufacturer: Coperion Waeschle
Coperion Twin Screw Extruder Multi Hole Pelletizing strained Die Head previously used on 70mm
Evansville, IN
Visit Auction Website
Trusted Seller
Auction
Coperion Twin Screw Extruder Multi Hole Pelletizing strained Die Head previously used on 92mm
- used
- Manufacturer: Coperion Waeschle
Coperion Twin Screw Extruder Multi Hole Pelletizing strained Die Head previously used on 92mm
Evansville, IN
Visit Auction Website
Jwell PP Extruder
- used
- Manufacturer: Jwell
- Model: PP
Good condition Jwell PP Extruders manufactured in 2000. Located in China and other countries. Click request price for more information.
China