- Trusted Seller
2020 Geek+ P800
used
- Manufacturer: Geek+
Robot Dimensions ***Charger Included*** Machine type: Robots | Machine location: California | Stock #: 602650 | Max lifting load: 2,200 LBS | Max no-load speed: 4.5 mph | Max load speed: 3.5 mph | Max lifting tim...
- Trusted Seller
2019 Kuka KR 60-3
used
- Manufacturer: Kuka
- Model: KR 60
Robot Motion Speed A1 – 128 °/s (2.23 rad/s) A2 – 102 °/s (1.78 rad/s) A3 – 128 °/s (2.23 rad/s) A4 – 260 °/s (4.54 rad/s) A5 – 245 °/s (4.28 rad/s) A6 – 322 °/s (5.62 rad/s) Robot Motion Range A1 – ±185° A2 – 13...
- Trusted Seller
2023 Fanuc P-40iA
used
- Manufacturer: Fanuc
- Model: P-40iA
Equipment Overview The FANUC P-40iA is a 6-axis paint robot designed for hazardous location operations. With FM/ATEX Class I, II, III Div 1 certification, a compact 5 kg wrist payload, and purge-sealed internals,...
- Trusted Seller
2023 Fanuc P-20iA
used
- Manufacturer: Fanuc
Equipment Overview The FANUC P-40iA is a 6-axis paint robot designed for hazardous location operations. With FM/ATEX Class I, II, III Div 1 certification, a compact 5 kg wrist payload, and purge-sealed internals,...
- Trusted Seller
2023 Fanuc P-40iA
used
- Manufacturer: Fanuc
- Model: P-40iA
Equipment Overview The FANUC P-40iA is a 6-axis paint robot designed for hazardous location operations. With FM/ATEX Class I, II, III Div 1 certification, a compact 5 kg wrist payload, and purge-sealed internals,...
- Trusted Seller
2023 Fanuc P-40iA
used
- Manufacturer: Fanuc
- Model: P-40iA
Equipment Overview The FANUC P-40iA is a 6-axis paint robot designed for hazardous location operations. With FM/ATEX Class I, II, III Div 1 certification, a compact 5 kg wrist payload, and purge-sealed internals,...
- Trusted Seller
2024 Fanuc CRX-5iA
used
- Manufacturer: Fanuc
- Model: CRX-5iA
Equipment Overview This integrated FANUC CRX-5iA robot cell includes a complete collaborative arm mounted on a linear slide, paired with a vision-based end-effector and inspection lighting. Built for light assemb...
- Trusted Seller
2014 Panasonic TA-1600
used
- Manufacturer: Panasonic
- Model: TA-1600
Equipped With: 1-Axis Positioner (can be used as an arc welding robot by adding a weld package)
- Trusted Seller
2010 Kuka KR210
used
- Manufacturer: Kuka
- Model: KR 210
Payload 210 kg Reach 2700 mm Repeatability 0.12 mm Number of Axes 6 Product mass 1267 kg Gantry Rated travel Min. rated travel = 1,000 mm Max. rated travel = 30,000 mm (longer rated travels available on request) ...
- Trusted Seller
2014 FANUC America Lean Machine Gen 2
used
- Manufacturer: Fanuc
Max Load Capacity at Wrist: 10 kg Max Reach: 1422mm Controlled Axes: 6 Configuration: 10M Mount: Floor, Upside Down, Wall, Angle Mechanical Weight: 130 kg Component Type: Articulated Robots Series: M-10 Repeatabi...
- Trusted Seller
2023 Dan Tech 7458
used
- Manufacturer: Dan Tech
MANUFACTURER: DAN di DE ANTONI srl. 25030 COCCAGLIO (BS) Italy DUST EXHAUSTER: N. 4 SUCTION POINT 150mm: The minimum recommended flow rate is 1.400 m 3 /h for each suction point, for a maximum of 2.800 m 3 /h J...
- Trusted Seller
2022 Fanuc R-2000iC/165F
used
- Manufacturer: Fanuc
- Model: R-2000iC/165F
Mechanical Weight 1090 kg 2 Units available price each at $37,900 Two R-2000iC/165F six-axis robots with R-30iB Plus A-Cabinet Controllers Maximum Speed J1: 130°/s, J2: 115°/s, J3: 125°/s, J4: 180°/s, J5: 180°/s,...
- Trusted Seller
2013 Kuka KRC4-NA
used
- Manufacturer: Kuka
Axes: 6 Maximum payload: 300 kg (661 lbs) Reach: 2700 mm (106.3 inches) Repeatability: +/- 0.05 mm (0.002 inches) Maximum speed (axis 1-2-3): 200 degrees per second Maximum speed (axis 4-5-6): 360 degrees per sec...
- Trusted Seller
2021 Fanuc CRX-10iA/L
used
- Manufacturer: Fanuc
- Model: CRX-10iA/L
The CRX-10iA/L Collaborative Robot has a longer reach (1418mm) than its counterpart, the CRX-10iA (1249mm), making it a perfect solution for automating manufacturing tasks such as machine tending, picking & packa...
- Trusted Seller
2020 FANUC M-2000iA/2300
used
- Manufacturer: Fanuc
- Model: M-2000iA/2300
Equipped With: Lifting Plates w/Eye Bolts J1 axis range 360 degree Mechanical unit cable with: EE Connector at J3 with 8 inputs, 8 outputs, HBK, +24 VDC, 0VDC ES (Ethernet Signal) cable with a connector at the ba...
Fanuc CRX-10iA/L Industrial Robot
used
- Manufacturer: Fanuc
- Model: CRX-10iA/L
Good condition Fanuc CRX-10iA/L Industrial Robots manufactured in 2021. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
