Used Filter Presses in USA

Independent Filter Press Co.. Independent Filter Press Co.. Independent Filter Press Co.. 5045-1 Filter Press - 5045-1

• Manufacturer: Independent Filter Press Co..

Qty: 68 Filter Plates At 36"x36", (2280#) 61x76x47, (1050#) 48x68x25, (3455#) 50x180x60, *contains 3 Pieces

Beckart Enviromental Filter Press

• Manufacturer: Beckart

38 Filters 24 3/4"x24 3/4", (2280#) 152"x40"x59", (235#)50"38"x24", (235#) 50"x38"x24", (645#) 57"x36"x29", *contains 4 Pieces

Standard Filter Corporation Filter Press - M-42-6250-0

• Manufacturer: Standard Industrial

(36) 42" X 42", Hydraulic 4100 Psi, 100° C, Made In The Usa

64" Passavant Filter Press

• Manufacturer: Passavant

64" Passavant Filter Press Used Passavant filter press, model 64, bridge type design with plate shifter, with approx. (85) 64" wide plates, with 7.5 hp 460 volt hydraulic pump, system includes Abel FHG 402-22/25 ...

24" Sperry Filter Press Skeleton

• Manufacturer: Sperry

24" Sperry Filter Press Skeleton Used 24" Sperry Filter Press Skeleton, Type 47 48 49 dual acting hydraulic cylinder with pump, 4 eye, 145" day- light, Serial No. 51942.

Pac-Press Model 470 | 31 / 470mm Plate Filter Press

• Manufacturer: Pacific Press Co

Unit is USED. Unit shows some signs of wear / rust / paint peeling / scratches but none effecting the intended use of the filter press. This unit was recently removed from service with no issues noted by the prev...

18" Star Filter Press, Polypropylene

• Manufacturer: Star Systems

18" Star Filter Press, Polypropylene Used 18" Star filter press, model 06-19S, (18) polypropylene plates, stainless steel frame and end plates, 2 eye, manual closure, rated 60 psi at 375 f, serial# 50119002.

18" Sperry Filter Press, S/S

• Manufacturer: Sperry

18" Sperry Filter Press, S/S Used 18" Sperry press with (5) 18" x 18" stainless steel plates and frames, 4 eye, manual closure.

P.E.W.E DeWater Systems Belt Filter Press

• Manufacturer: PEWE

P.E.W.E DeWater Systems Belt Filter Press Used P.E.W.E DeWater Systems belt filter press, model DBP-705, stainless steel feed pan, nominal capacity .5 - 3 cu meters/hour, approximately .5 meter wide belts with .7...

200 MM Enotecnica Pillan Filter Press, Type Filtro 20x20

• Manufacturer: Enotecnica Pillan srl

200 MM Enotecnica Pillan Filter Press, Type Filtro 20x20 Used 200 mm Enotecnica Pillan filter press, type Filtro 20x20, model AF30 Noryl Plate + pump Z25, poly plates, .37 feed pump, manual closure, serial# 1303,...

47.24" (1200 MM) Durco Filter Press, Model EPMM1200/32-52

• Manufacturer: Durco

47.24" (1200 MM) Durco Filter Press, Model EPMM1200/32-52 Used Durco filter press, model EPMM1200/32-52, (55) 1200 mm (47.24") recessed membrane plates, 4 eye, center feed, overhead plate shifter, 1325 sq ft surf...

2 CU FT M.W WATERMARK "FP470G32L-14-2MXX" MANUAL/HYDRAULIC FILTER PRESS w/(14) 18.5” X 18.5” GASKETED FILTER PLATES

2 CU. FT. W.M. WATERMARK MANUAL/HYDRAULIC FILTER PRESS Serial No FP00634, Model FP470G321-14-2MXX EQUIPPED WITH: Manual Hydraulic Closure System (14) Gasketed Filter Plates (470MM x 470MM) Dumpster Discharge Air ...

Used JWI Filter press 10.5 cu ft. Polypropylene plate and frame press

• Manufacturer: JWI

Used JWI Filter press 10.5 cu ft. Polypropylene plate and frame press. Unit has (21) 800 mm gasketed polypropylene plates, with center feed and (4) corner return. 1-3-1 button sequence for air blow down. Automati...

2013 Wesco FP 630G32-100-3/5A, 5 Cubic Ft Filter Press

• Manufacturer: Wesco

Wesco - 5 Cubic Ft Filter Press Model: FP 630G32-100-3/5A YOM: 2013 Plate Size: 630 mm x 630 mm Hydraulic Clamping Pressure: 4500 Psi Relief Pressure: 4900 Psi Cubic Feet: 5 ft3

Stainless Steel Laboratory Filter Press with Pump - 7.25" (184mm)

• Manufacturer: Mori TEM

Stainless steel frame assembly with drip pan Filter Area: approx. 7.3 sq. ft. total (0.365 sq. ft. per filter) Filter Type: Paper Number of filters: 20 Filter Plate Material: nylon Manual handwheel closure Includ...